Charbroil Igniter Components

 

 

Highest quality replacement parts - Free USA shipping $49 or more* - No Sales Tax*


Charbroil Igniter Components

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-9B
Weight: 0.2

UP-9B fits these 303 Charbroil models:

$8.81
 

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-8B
Weight: 0.3

$23.13
 

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-7B
Weight: 0.3

$7.77
 

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-6B
Weight: 0.3

$18.30
 

Universal one outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-5B
Weight: 0.12

$17.02
 

Universal push-button igniter. Round male connector. Includes locking nut. Color can varies gray or black by manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.


This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: UP-4B
Weight: 0.3

$6.98
 

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.


This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: TS-IG4010
Weight: 0.2

TS-IG4010 fits these 80 Charbroil models:

$16.16
 

Push-button electronic igniter with three (3) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG3008
Weight: 0.2

TS-IG3008 fits these 2 Charbroil models:

        $16.16
         

        Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

        For more information about ignition systems and components, please see article Ignition 101 in our help center.



        Part Number: TS-IG3007
        Weight: 0.2

        TS-IG3007 fits these 23 Charbroil models:

        $35.57
         

        Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

        For more information about ignition systems and components, please see article Ignition 101 in our help center.



        Part Number: TS-IG2006
        Weight: 0.2

        TS-IG2006 fits these 82 Charbroil models:

        $19.40
         

        Electronic igniter with one (1) spade connector.
        • One AA battery required (not included).
        • Requires 7/8 inch mounting hole.
        • Will have a silver or a black cap.

        For more information about ignition systems and components, please see article Ignition 101 in our help center.



        Part Number: SBB00047
        Weight: 0.20

        SBB00047 fits these 2 Charbroil models:

              $19.99
               

              Battery powered push button igniter.
              • Has six (6) spade type male connectors.
              • Uses 1 AA battery (not supplied)
              • Requires 7/8” mounting hole.

              For more information about ignition systems and components, please see article Ignition 101 in our help center.



              Part Number: IGEIB6-B
              Weight: 0.3

              IGEIB6-B fits these 29 Charbroil models:

              $34.11
               

              Battery powered push button igniter.
              • Has four (4) spade type male connectors.
              • Uses 1 AAA battery (not supplied)
              • Requires 3/4” or 13/16” mounting hole.

              For more information about ignition systems and components, please see article Ignition 101 in our help center.



              Part Number: IGEIB4-B
              Weight: 0.3

              IGEIB4-B fits these 80 Charbroil models:

              $34.08
               

              Battery powered push button igniter.
              • Has three (3) spade type male connectors.
              • Uses 1 AAA battery (not supplied)
              • Requires 3/4” or 13/16” mounting hole.

              For more information about ignition systems and components, please see article Ignition 101 in our help center.



              Part Number: IGEIB3-B
              Weight: 0.3

              IGEIB3-B fits these 2 Charbroil models:

                    $31.52
                     

                    Battery powered push button igniter.
                    • Has two (2) spade type male connectors.
                    • Uses 1 AAA battery (not supplied)
                    • Requires 3/4” or 13/16” mounting hole.

                    For more information about ignition systems and components, please see article Ignition 101 in our help center.



                    Part Number: IGEIB2-B
                    Weight: 0.3

                    IGEIB2-B fits these 82 Charbroil models:

                    $34.11
                     

                    Single Output Igniton Module. Fits many brands. Uses 1 AAA battery (not included) and requires a 3/4” mounting hole.

                    For more information about ignition systems and components, please see article Ignition 101 in our help center.


                    This part is currently out of stock, but more are already on the way and expected to arrive late May

                    Part Number: IGEIB15-B
                    Weight: 0.20

                    IGEIB15-B fits these 2 Charbroil models:

                          $15.06
                           

                          20” igniter wire with female spade and round connector.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-7B
                          Weight: 0.02

                          IG-7B fits these 999 Charbroil models:

                          $4.75
                           

                          Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-5B
                          Weight: 0.3

                          IG-5B fits these 279 Charbroil models:

                          $11.39
                           

                          16” Universal Ignitor Wire

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-48B
                          Dimensions: 16
                          Weight: 0.05

                          IG-48B fits these 897 Charbroil models:

                          $6.35
                           

                          Universal 2 1/2” adaptor wire with a round female end and a male spade end.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-46B
                          Dimensions: 2 1/2
                          Weight: 0.10

                          $4.30
                           

                          46” Wire with female spade connectors and square plastic connectors.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-30B
                          Dimensions: 46
                          Weight: 0.1

                          IG-30B fits these 910 Charbroil models:

                          $8.29
                           

                          Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-28B
                          Weight: 0.2

                          IG-28B fits these 574 Charbroil models:

                          $10.03
                           

                          Charbroil Electrode with wire. (For Use With CBP7 Burner).

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-26B
                          Weight: 0.1

                          IG-26B fits these 10 Charbroil models:

                          $9.74
                           

                          Ceramic electrode for use with CBP1-CI cast iron burner.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-24B
                          Weight: 0.3

                          IG-24B fits these 67 Charbroil models:

                          $8.32
                           

                          Burner-mounted ceramic electrode, wire, and mounting bracket.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-19B
                          Weight: 0.1

                          IG-19B fits these 82 Charbroil models:

                          $12.93
                           

                          20” igniter wire with two (2) female spade connectors.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-18B
                          Weight: 0.03

                          IG-18B fits these 682 Charbroil models:

                          $4.93
                           

                          Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-17B
                          Weight: 0.11

                          IG-17B fits these 22 Charbroil models:

                          $11.34
                           

                          Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-15B
                          Weight: 0.3

                          $14.41
                           

                          Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil PrecisionFlame burner system, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers PFB-7, PFB-8, and PFB-9.
                            Includes:
                          • Gas collector box
                          • Ceramic electrode
                          • Mounting screw

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-14B
                          Weight: 0.3

                          IG-14B fits these 149 Charbroil models:

                          $9.05
                           

                          Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
                            Includes:
                          • Gas collector box
                          • Ceramic electrode and wire
                          • Mounting hardware

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: IG-11B
                          Weight: 0.3

                          IG-11B fits these 527 Charbroil models:

                          $9.74
                           

                          21” wire for side burner or other applications. One female spade connector, one female round connector.

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.



                          Part Number: 10342-T14
                          Dimensions: 21
                          Weight: 0.05

                          10342-T14 fits these 999 Charbroil models:

                          $4.32
                           

                          electronic push-button 4-spade igniter.
                          • Uses AAA battery (not included)
                          • Requires 3/4” mounting hole

                          For more information about ignition systems and components, please see article Ignition 101 in our help center.


                          This part is currently out of stock, but more are already on the way and expected to arrive late May

                          Part Number: 10342-247
                          Weight: 0.5

                          10342-247 fits this one Charbroil model:

                                  $16.16
                                   

                                  electrode

                                  For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                  Part Number: 09551
                                  Material: ceramic
                                  Weight: 0.1

                                  09551 fits these 13 Charbroil models:

                                  $10.35
                                   

                                  electrode

                                  For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                  Part Number: 07304
                                  Material: ceramic
                                  Weight: 0.1

                                  07304 fits these 2 Charbroil models:

                                        $9.42
                                         

                                        electrode

                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                        Part Number: 05223
                                        Material: ceramic
                                        Weight: 0.1

                                        05223 fits these 30 Charbroil models:

                                        $9.42
                                         

                                        Ignition electrode.

                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                        Part Number: 04450
                                        Dimensions: 3 5/16” x 0 7/8”
                                        Weight: 0.1

                                        04450 fits these 91 Charbroil models:

                                        $10.38
                                         

                                        Electrode with 24.5” wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                        Part Number: 04432
                                        Dimensions: 4”
                                        Material: ceramic
                                        Weight: 0.1

                                        04432 fits these 65 Charbroil models:

                                        $10.35
                                         

                                        Burner mounted electrode for use with 15591 and 15491 burners.
                                        • 39” wire with female spade connector
                                        • Includes adapter wire part 03198 for applications needing male spade connector on electrode.

                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                        Part Number: 04430
                                        Material: ceramic
                                        Weight: 0.1

                                        04430 fits these 134 Charbroil models:

                                        $12.47
                                         

                                        Collector box and ceramic electrode with male spade connector for models with 12112 or 11512 burners. Attaches directly to burner.

                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                        Part Number: 04420
                                        Material: ceramic
                                        Weight: 0.1

                                        04420 fits this one Charbroil model:

                                                $10.03
                                                 

                                                Universal adapter wire with male round and female spade connectors.

                                                For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                Part Number: 03751
                                                Weight: 0.05

                                                $3.98
                                                 

                                                20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

                                                For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                Part Number: 03750
                                                Dimensions: 1/16
                                                Weight: 0.05

                                                03750 fits these 344 Charbroil models:

                                                $6.01
                                                 

                                                Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

                                                For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                Part Number: 03621
                                                Dimensions: 1 1/8” x 1 1/8”
                                                Weight: 0.1

                                                03621 fits these 20 Charbroil models:

                                                $7.57
                                                 

                                                25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

                                                For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                Part Number: 03400
                                                Weight: 0.1

                                                03400 fits this one Charbroil model:

                                                        $5.31
                                                         

                                                        Universal battery powered push button ignitor.
                                                        • 1.5 volt
                                                        • Has five (5) terminals (male spade connector)
                                                        • Uses a single AA battery (not included))
                                                        • 03610 and 03620 wires are commonly used with this igniter (not included)
                                                        • Requires 7/8” mounting hole
                                                        • Overall dimensions: 2” x 3 3/8” x 3”
                                                        • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

                                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                        Part Number: 03380
                                                        Dimensions: 3 5/16” x 2”
                                                        Weight: 0.7

                                                        $44.93
                                                         

                                                        Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
                                                        • 1.5 volt
                                                        • Has six (6) spark outlets (male spade connector)
                                                        • Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
                                                        • Uses a single AA battery (not included)
                                                        • Requires 7/8” mounting hole
                                                        • Overall dimensions: 2” x 3 3/8” x 2 5/8”
                                                        NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

                                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                        Part Number: 03356
                                                        Dimensions: 3 3/8” x 2”
                                                        Weight: 0.7

                                                        03356 fits these 19 Charbroil models:

                                                        $48.03
                                                         

                                                        Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch.

                                                        Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part 03621. Inspect your system.
                                                        • 1.5 volt
                                                        • Has five (5) spark outlets (male spade connector)
                                                        • Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
                                                        • Uses a single AA battery (not included)
                                                        • Requires 7/8” mounting hole
                                                        • Overall dimensions: 2” x 3 3/8” x 2 5/8”
                                                        NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.

                                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                        Part Number: 03352
                                                        Dimensions: 3 3/8” x 2”
                                                        Weight: 0.7

                                                        03352 fits these 72 Charbroil models:

                                                        $48.03
                                                         

                                                        Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
                                                        • 1.5 volt
                                                        • Has four(4) spark outlets (male spade connector)
                                                        • Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
                                                        • Uses a single AA battery (not included)
                                                        • Requires 7/8” mounting hole
                                                        NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

                                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                        Part Number: 03344
                                                        Dimensions: 2” x 2 1/2”
                                                        Weight: 0.5

                                                        03344 fits these 60 Charbroil models:

                                                        $42.71
                                                         

                                                        Small AA battery powered push button spark generator.
                                                        • 1.5 volt
                                                        • Has two (2) terminals (male spade connector)
                                                        • Uses a single AA battery (not included)
                                                        • 03610 and 03620 wires are commonly used with this igniter (not included)
                                                        • Requires 7/8” mounting hole

                                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                        Part Number: 03342
                                                        Weight: 0.3

                                                        03342 fits these 36 Charbroil models:

                                                        $48.51
                                                         

                                                        Universal three-outlet battery powered push button ignitor.
                                                        • 1.5 volt
                                                        • Has three (3) terminals (male spade connector)
                                                        • Uses a single AA battery (not included)
                                                        • 03610 and 03620 wires are commonly used with this igniter (not included)
                                                        • Requires 7/8” mounting hole

                                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                        Part Number: 03333
                                                        Dimensions: 2 9/16” x 2”
                                                        Weight: 0.5

                                                        $35.57
                                                         

                                                        Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
                                                        • 1.5 volt
                                                        • Has three (3) spark outlets (male spade connector)
                                                        • Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
                                                        • Uses a single AA battery (not included)
                                                        • Requires 7/8” mounting hole
                                                        NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

                                                        For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                        Part Number: 03332
                                                        Dimensions: 2 5/8” x 2 5/8”
                                                        Weight: 0.3

                                                        03332 fits this one Charbroil model:

                                                                $42.97
                                                                 

                                                                Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
                                                                • 1.5 volt
                                                                • Has two (2) spark outlets (male spade connector)
                                                                • Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
                                                                • Uses a single AA battery (not included)
                                                                • Requires 7/8” mounting hole
                                                                NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

                                                                For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                                Part Number: 03322
                                                                Dimensions: 2 5/8” x 2”
                                                                Weight: 0.5

                                                                03322 fits these 52 Charbroil models:

                                                                $35.57
                                                                 

                                                                Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
                                                                NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

                                                                For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                                Part Number: 03197
                                                                Weight: 0.05

                                                                $5.31
                                                                 

                                                                Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
                                                                Includes:
                                                                • Push-button ignition module switch with two male spade connectors on back
                                                                • Two 20” wires with female spade connectors
                                                                • One plastic mounting nut

                                                                For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                                Part Number: 03152
                                                                Dimensions: 17 3/4” x 1”
                                                                Weight: 0.1

                                                                03152 fits these 209 Charbroil models:

                                                                $32.51
                                                                 

                                                                Electrode, collector box with connector wire that has a female spade end.

                                                                For more information about ignition systems and components, please see article Ignition 101 in our help center.



                                                                Part Number: 03080
                                                                Material: ceramic
                                                                Weight: 0.05

                                                                03080 fits these 29 Charbroil models:

                                                                $9.25
                                                                 

                                                                Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

                                                                NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.
                                                                This part is currently out of stock, but more are already on the way and expected to arrive early Apr

                                                                Part Number: 01472
                                                                Material: ceramic
                                                                Weight: 0.1

                                                                01472 fits these 174 Charbroil models:

                                                                $10.90
                                                                 

                                                                Electrode assembly. Includes electrode with wire, collector box, and mounting bolt with nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

                                                                Part Number: 00653
                                                                Material: ceramic
                                                                Weight: 0.1

                                                                00653 fits these 23 Charbroil models:

                                                                $13.57
                                                                 

                                                                 



                                                                 


                                                                Besides Charbroil Igniter Components, we also have:
                                                                Charbroil Burners
                                                                Charbroil Burner Brackets and Carryovers
                                                                Charbroil Venturis
                                                                Charbroil Cooking Grids
                                                                Charbroil Cooking Grates
                                                                Charbroil Rock Grates
                                                                Charbroil Heat Plates
                                                                Charbroil Flame Tamers
                                                                Charbroil Flavor Activators
                                                                Charbroil Heat Tents
                                                                Charbroil Heat Diffusers
                                                                Charbroil Heat Shields
                                                                Charbroil Vaporiser Bar
                                                                Charbroil Heat Shields
                                                                Charbroil Igniter Components
                                                                Charbroil Grease Trays
                                                                Charbroil Knobs and Handles
                                                                Charbroil Regulators and Hoses
                                                                Charbroil Warming Racks
                                                                Charbroil Valves, Orifices, and Manifolds
                                                                Charbroil Rotisserie components
                                                                Charbroil Heat indicators and Meat Thermometers

                                                                *Get free USA shipping on orders for Charbroil Igniter Components. Orders that $49 and over ship free to the lower 48 states. See shipping policy below for more info.


                                                                Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
                                                                Build Date: May 12 2026