Every Igniter Component we have - 1

Electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 00161
Dimensions: 3 1/2” x 0 7/8”
Material: ceramic
Weight: 1.0

Fits brands: Dyna-Glo

Electrode and wire. Includes mounting bolt and nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center). Includes an extra 16” connector wire with flat female spade end and male spade end for some applications (not shown in photo).

Part Number: 00162
Material: ceramic
Weight: 0.1

Fits brands: BBQ-Pro, Duro, Kenmore, Member's Mark, Nexgrill, PermaSteel

Electrode and wire. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

Part Number: 00163
Dimensions: 3 1/4” x 1 1/4”
Material: ceramic
Weight: 0.1

Fits brands: BBQ-Pro, Kenmore, Master Forge

Electrode assembly. Includes electrode with wire, collector box, and mounting bolt with nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

Part Number: 00653
Material: ceramic
Weight: 0.1

Fits brands: Charbroil, Costco, Front Avenue, Thermos

Replacement rotisserie electrode with wire, mounting bracket, and ceramic insulator for use with Ducane models with rear rotisserie. Wire connects to spark generator with female round connector. For more information, see our Help Center article: Ignition 101.

Part Number: 01134
Material: ceramic
Weight: 0.1

Fits brands: Ducane

Replacement electrode.

• Ceramic insulator
• 25” wire with female spade connector
• Locking nuts.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01190
Material: ceramic
Weight: 0.2

Fits brands: Costco, Grillmaster, Kenmore, Nexgrill

Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.

Part Number: 01472
Material: ceramic
Weight: 0.1

Fits brands: Charbroil, Coleman, Kenmore, Master Chef, Thermos

electrode with female spade connection and 45 ins. wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01473
Dimensions: 3 3/4” x 1”
Weight: 0.1

Fits brands: Home Depot, Nexgrill

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2 and 3 piece multi-packs. See part 04022-X2, X3.

Part Number: 02291
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.1

Fits brands: Member's Mark, Sams

Burner mounted electrodes with male spade connector. SET OF TWO (2). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 02291-X2
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.2

Fits brands: Member's Mark, Sams

SearPLUS™ burner sparker.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02361
Dimensions: 3 1/4
Material: ceramic
Weight: 0.1

Fits brands: Dyna-Glo

Electrode with a 23 1/2” wire and has a male connector with a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02390
Material: ceramic
Weight: 0.1

Fits brands: Brinkmann

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02415
Material: ceramic
Weight: 0.1

Fits brands: Brinkmann

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02616
Dimensions: 3 5/8” x 4 5/16”
Material: stainless steel
Weight: 0.3

Fits brands: Kenmore

Igniter collector box, ceramic electrode with male spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02617
Dimensions: 5 1/2
Material: stainless steel
Weight: 0.3

Fits brands: Kenmore

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02619
Dimensions: 5
Material: stainless steel
Weight: 0.3

Fits brands: Aussie, The Source

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02622
Dimensions: 3 1/4” x 1 1/2”
Material: ceramic
Weight: 0.1

Fits brands: Grand Hall

Collector box with electrode and connector wire (both ends are female spade).

SET OF EIGHT (8).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02624-X8
Material: ceramic
Weight: 1.6

Fits brands: Member's Mark, Sams

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02633
Dimensions: 3 15/16” x 1 5/8”
Material: ceramic
Weight: 0.10

Fits brands: Kenmore

Electrode, collector box with connector wire that has a female spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03080
Material: ceramic
Weight: 0.05

Fits brands: BBQ-Pro, Charbroil, Kenmore, Master Chef, Thermos

Electrode assembly. Includes:

• Ceramic electrode
• Gas collector box
• 40” connector wire with female spade connector
• Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03118
Material: ceramic
Weight: 0.2

Fits brands: Kenmore, Kirkland Signature, Master Forge

Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Part Number: 03120
Weight: 0.1

Fits brands: Amana, American Select, Aussie, BBQ-Pro, BBQTEK, Backyard Grill, Barbeques Galore, Blooma, Browning, Char-Griller, Charbroil, Coleman, Ducane, Fiesta, Great Outdoors, Grill Boss, Grillrite, Heartland Outdoors, Huntington, Kenmore, Life@Home, Master Chef, Patio Master, Range Master, RevoAce, Sunbeam, Thermos, Turbo, Uniflame, Weber

single-outlet spark generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03136
Material: plastic
Weight: 0.1

Fits brands: Weber

push-button for spark generator 03321

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03140
Dimensions: 1 1/4” x 1 1/4”
Weight: 0.05

Fits brands: Weber

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

Fits brands: Academy Sports, Big Horn, Blooma, Charbroil, Coleman, Costco, Duro, Grand Hall, Home Depot, Jenn-Air, Kenmore, Kirkland Signature, Kitchen Aid, Master Cook, Master Forge, Member's Mark, Nexgrill, Outdoor Gourmet, Perfect Flame, Sams, Thermos, Weber

round trigger switch for AA and AAA spark generators; use original wires

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03153
Dimensions: 17 3/4” x 1”
Weight: 0.1

Fits brands: Blooma, Coleman

wired remote trigger switch

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03154
Material: plastic
Weight: 0.1

Fits brands: Vermont Castings, Weber

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Electrode replacement kit for Fire Magic grills

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199
Material: ceramic
Weight: 0.5

Fits brands: Fire Magic

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Battery powered push button spark generator with single round connector.

• Installs behind the control panel, replacing a piezo plunger.
• Fits most grills that use a push-button piezo plunger.
• Uses a single AA battery (not included).
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03300
Dimensions: 2 7/8” x 2 1/16”
Weight: 0.3

Fits brands: PGS

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has two (2) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03322
Dimensions: 2 5/8” x 2”
Weight: 0.5

Fits brands: Charbroil, Coleman, Home Depot, Kenmore, Kitchen Aid, Nexgrill, Thermos, Weber

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has three (3) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03332
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.3

Fits brands: Blooma, Charbroil, Coleman, Kenmore, Master Cook, Master Forge, Weber

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

Fits brands: Academy Sports, Brinkmann, Broilmaster, Charbroil, Home Depot, Kenmore, Master Chef, Member's Mark, Nexgrill, North American Outdoors, Outdoor Gourmet, Sams, Thermos

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has four(4) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03344
Dimensions: 2” x 2 1/2”
Weight: 0.5

Fits brands: Charbroil, Coleman, Home Depot, Kenmore, Kitchen Aid, Member's Mark, Nexgrill, Thermos

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch.

Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part 03621. Inspect your system.

• 1.5 volt
• Has five (5) spark outlets (male spade connector)
• Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

Fits brands: Charbroil, Coleman, Costco, Duro, Grand Hall, Home Depot, Jenn-Air, Kenmore, Kitchen Aid, Master Forge, Member's Mark, Nexgrill, Perfect Flame, Sams

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has six (6) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03356
Dimensions: 3 3/8” x 2”
Weight: 0.7

Fits brands: Academy Sports, Big Horn, Charbroil, Costco, Home Depot, Jenn-Air, Kenmore, Kitchen Aid, Master Cook, Master Forge, Nexgrill, Outdoor Gourmet, Weber

Replacement electrode for use with burner 13361.

• Ceramic insulator
• 22” wire with female spade connector
• Locking nuts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03361
Material: ceramic
Weight: 0.2

Fits brands: Costco, Duro, Grill King, Jenn-Air, Member's Mark, Nexgrill, Sams

2-outlet AA spark generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03372
Weight: 0.5

Fits brands: Coleman

4-outlet spark generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03373
Material: plastic
Weight: 0.4

Fits brands: Weber

Battery powered 7-outlets push button ignitor. Uses AA battery and requires a 7/8” mounting hole.

WARNING: Before ordering this 7-outlet ignitor, please inspect the spacing inside your grill for this part. The original ignitor was 2 1/2” x 2 5/8”. The new version is longer 3 1/8” x 2” and it has two ”humps” on each end. The original only had one ”hump.” Please determine that the larger version will fit into your grill.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03377
Weight: 0.5

Fits brands: Brinkmann, Home Depot, Master Forge, Nexgrill

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has seven (7) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03387
Dimensions: 3 3/8” x 2”
Weight: 0.5

Fits brands: Costco, Home Depot, Kenmore, Kirkland Signature, Kitchen Aid, Master Forge, Nexgrill

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has eight (8) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03388
Dimensions: 3 1/2” x 2”
Weight: 0.5

Fits brands: Costco, Home Depot, Kitchen Aid, Nexgrill

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Fits brands: Charbroil

Ignition connection wires used to connect battery powered spark generators to electrodes. SET OF FOUR (4) 47” wires.

• Each wire has female spade connectors on one end and square plastic connectors on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610-X4
Weight: 0.2

Fits brands: Academy Sports, Member's Mark, Omaha, Outdoor Gourmet, Sams

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

Fits brands: Academy Sports, Big Horn, Charbroil, Costco, Duro, Grand Hall, Home Depot, Jenn-Air, Kenmore, Kirkland Signature, Kitchen Aid, Master Cook, Master Forge, Member's Mark, Nexgrill, Outdoor Gourmet, Perfect Flame, Sams, Weber

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Fits brands: Arkla, BBQ-Pro, Backyard Grill, Blue Ember, Brinkmann, Broil-Mate, Broilmaster, Charbroil, Charmglow, Costco, Ducane, Ellipse, Falcon, Fiesta, Grand Hall, Great Outdoors, Grill Boss, Grill Chef, Grillmaster, Grill Mate, GrillPro, Grillrite, Home Depot, Huntington, Jenn-Air, Kenmore, Kitchen Aid, Master Forge, Member's Mark, Nexgrill, PGS, Patio Chef, Patio Master, Phoenix, Pro Chef, RevoAce, S.R. Potten, Sams, Sunbeam, Thermos, Uniflame, Warm Morning

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05