Master Forge Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

TS-IG4010 fits these 5 Master Forge models:
GD4215S	GD4825	GD4825S	GGPL-2100CA	MFJ810CSB

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

TS-IG2006 fits these 2 Master Forge models:
MFA350BNP	MFA350CNP

snap-on electrode, wire, and collector box assembly.

Note: This part does not fit our after-market burners such as 19002.

This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: SP5016-20
Weight: 0.05

SP5016-20 fits these 2 Master Forge models:
24025MSF	30030MSF

113-03020-R-X5 Ignition electrode and ignition wire assembly. Set of five (5). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Master Forge MFA480 and MFA550 series grills. May fit other models.

This Ignition electrode replaces original Master Forge Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-113-03020-R-X5
Material: ceramic
Weight: 0.1

MF1-113-03020-R-X5 fits this one Master Forge model:
MFA550CBP

113-03020-R-X4 Ignition electrode and ignition wire assembly. SET OF FOUR (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Master Forge MFA480 and MFA550 series grills. May fit other models.

This Ignition electrode replaces original Master Forge Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-113-03020-R-X4
Material: ceramic
Weight: 0.1

MF1-113-03020-R-X4 fits this one Master Forge model:
MFA480BSP

113-03020-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Master Forge MFA480 and MFA550 series grills. May fit other models.

This Ignition electrode replaces original Master Forge Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-113-03020-R
Material: ceramic
Weight: 0.1

MF1-113-03020-R fits these 2 Master Forge models:
MFA480BSP	MFA550CBP

102-03013-R Ignition electrode and ignition wire assembly. Set of two (2). Fits Master Forge MFA350 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Master Forge part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-102-03013-R-X2
Material: ceramic
Weight: 0.2

MF1-102-03013-R-X2 fits this one Master Forge model:
MFA350BNP

102-03013-R Ignition electrode and ignition wire assembly. Fits Master Forge MFA350 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Master Forge part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-102-03013-R
Material: ceramic
Weight: 0.1

MF1-102-03013-R fits these 2 Master Forge models:
MFA350BNP	MFA350CNP

Replacement battery powered ignitor/spark generator and ground wire; has 7 outlets and two larger outlets: one for a ground wire, included, and one for the old remote switch wire, not included. Uses AA battery, not included, and requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: L3218-00-8002-R
Weight: 0.55

L3218-00-8002-R fits these 2 Master Forge models:
3218LT	3218LTN

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 6 Master Forge models:
B10LG25 BG1795BAL	BG179A E3518-LP	MFA350BNP MFA350CNP

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

IGEIB4-B fits these 5 Master Forge models:
GD4215S	GD4825	GD4825S	GGPL-2100CA	MFJ810CSB

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB2-B
Weight: 0.3

IGEIB2-B fits these 2 Master Forge models:
MFA350BNP	MFA350CNP

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

IG-5B fits these 2 Master Forge models:
24025MSF	30030MSF

Collector Box & Ignitor Probe for CIMF1 Burner

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-49B
Weight: 0.15

IG-49B fits these 3 Master Forge models:
BG1793B-A	BG1795BAL	BG179A

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-48B fits these 12 Master Forge models:
B10LG25 BG1795BAL BG179A	E3518-LP GD4215S GD4825	GD4825S GGPL-2100CA IGS-01015J	MFA350BNP MFA350CNP MFJ810CSB

Universal extention wire, male spade end & female round end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc….

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-31B
Weight: .05

IG-31B fits this one Master Forge model:
B10LG25

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 12 Master Forge models:
B10LG25 BG1795BAL BG179A	E3518-LP GD4215S GD4825	GD4825S GGPL-2100CA IGS-01015J	MFA350BNP MFA350CNP MFJ810CSB

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

IG-20B fits these 3 Master Forge models:
GGP-2501	GGPL-2100CA	MFJ810CSB

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

electrode and wire - rear burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 342-C539
Weight: 0.1

342-C539 fits this one Master Forge model:
288999

Replacement battery powered ignitor/spark generator and ground wire; has 5 outlets and two larger outlets for the ground wire and the remote switch wire. Uses AA battery, not included, and requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 2518-3-17-R
Dimensions: 3 3/8” x 2”
Weight: 0.55

2518-3-17-R fits this one Master Forge model:
2518-3

For front top and bottom collector box; new design by manufacturer, a single piece replacing a combo set top & bottom. Fits 5-burner grills. Replaces OEM number 22226-014A and also numbers 22226-014 and 22216-014.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 22026-903
Dimensions: 28
Weight: 1.6

22026-903 fits these 3 Master Forge models:
288994	288999	678489

32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

10342-T18 fits this one Master Forge model:
678489

electrode with 49” wire that has a female round end for rear burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T17
Weight: 0.13

10342-T17 fits this one Master Forge model:
678489

electrode and wire for side burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T10
Weight: 0.3

10342-T10 fits this one Master Forge model:
288999

push-button electronic ignitor.

• 5 spark outlets (spade connectors)
• Uses AAA battery (not included)
• Requires 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-251
Weight: 0.5

10342-251 fits this one Master Forge model:
678489

electronic push-button 4-spade igniter.

• Uses AAA battery (not included)
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-247
Weight: 0.5

10342-247 fits this one Master Forge model:
288999

Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-21
Weight: 0.05

10342-21 fits these 2 Master Forge models:
24025MSF	30030MSF

electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 05039
Dimensions: 3 3/8” x 0 3/4”
Material: ceramic
Weight: 0.1

05039 fits these 3 Master Forge models:
GR1008-015039	GR2045401-MF-00	GR2045402-MF-00

Electrode with 25” wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04431
Dimensions: 4 3/4” x 4 1/2”
Material: ceramic
Weight: 0.1

04431 fits these 6 Master Forge models:
1010037 1010048	MFA480BSP MFA480GSN	MFA480GSP MFA550CBP

Burner mounted electrode for use with 15591 and 15491 burners.

• 39” wire with female spade connector
• Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430
Material: ceramic
Weight: 0.1

04430 fits this one Master Forge model:
1010048

Ceramic electrode and 39” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04423
Material: ceramic
Weight: 0.2

04423 fits these 5 Master Forge models:
BG2294B-B	BG2294B-LS	BG2296B-L	BG2614B	BG2614B-L

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03750 fits these 8 Master Forge models:
1010037 1010048	24025MSF 30030MSF	MFA480BSP MFA480GSN	MFA480GSP MFA550CBP

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

03621 fits these 3 Master Forge models:
3218LTM	P3018	RT2417S

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has seven (7) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03387
Dimensions: 3 3/8” x 2”
Weight: 0.5

03387 fits this one Master Forge model:
3218LTM

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Battery powered 7-outlets push button ignitor. Uses AA battery and requires a 7/8” mounting hole.

WARNING: Before ordering this 7-outlet ignitor, please inspect the spacing inside your grill for this part. The original ignitor was 2 1/2” x 2 5/8”. The new version is longer 3 1/8” x 2” and it has two ”humps” on each end. The original only had one ”hump.” Please determine that the larger version will fit into your grill.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03377
Weight: 0.5

03377 fits this one Master Forge model:
BG2296B-L

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has six (6) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03356
Dimensions: 3 3/8” x 2”
Weight: 0.7

03356 fits this one Master Forge model:
P3018

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch.

Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part 03621. Inspect your system.

• 1.5 volt
• Has five (5) spark outlets (male spade connector)
• Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

03352 fits these 3 Master Forge models:
BG2294B-B	BG2614B	BG2614B-L

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has three (3) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03332
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.3

03332 fits this one Master Forge model:
RT2417S

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

03152 fits these 6 Master Forge models:
3218LTM BG2294B-B	BG2614B BG2614B-L	P3018 RT2417S

Electrode assembly. Includes:

• Ceramic electrode
• Gas collector box
• 40” connector wire with female spade connector
• Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03118
Material: ceramic
Weight: 0.2

03118 fits these 9 Master Forge models:
2518-3 3218LT	3218LTM 3218LTN	3618ST IGS-01015J	L3218 RT2417S	SH3118B

Electrode and wire. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

Part Number: 00163
Dimensions: 3 1/4” x 1 1/4”
Material: ceramic
Weight: 0.1

00163 fits these 3 Master Forge models:
GD4825	GD4825S	GD4833