Master Forge MFA480BSP Grill Parts

113-03003-R-X4 Main Burner for Master Forge model MFA480BSP. Set of four (4). Stainless steel. Fits Master Forge MFA480 series grills. May fit other models.

This part replaces original Master Forge burner # 113-03003.

Part Number: MF1-113-03003-R-X4 (Replaces Master Forge MF-113-03003-X4)
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 2.1

113-03003-R Main Burner for Master Forge model MFA480BSP. Stainless steel. Fits Master Forge MFA480 series. May fit other models.

This part replaces original Master Forge burner # 113-03003.

Part Number: MF1-113-03003-R (Replaces Master Forge MF-113-03003)
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

Porcelain steel cooking grids for Master Forge model MFA480BSP. SET OF THREE (3).

• Porcelain enameled, glossy finish
• 3 panels, each 17 1/2” x 8 5/8”
• Total width: 25 7/8”

Part Number: 50263
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 25 7/8”
Material: porcelain steel wire
Weight: 10.8

Cast iron cooking grids for Master Forge model MFA480BSP. SET OF THREE (3).

• Porcelain treated, flat matte finish
• 3 panels, each 17 5/8” x 8 3/4”
• Total width: 26 1/4”

Part Number: 67243
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 1/4”
Material: matte cast iron
Weight: 10.5

113-03005-R-X4 Heat tent for Master Forge model MFA480BSP. Porcelain enameled steel. Set of four..

Fits Master Forge MFA480 series grills. May fit other models.

This heat tent replaces original Master Forge part 113-03005.

Part Number: MF1-113-03005-R-X4 (Replaces Master Forge MF-113-03005-X4)
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

113-03005-R Heat tent for Master Forge model MFA480BSP. Porcelain enameled steel. Sold individually.

Fits Master Forge MFA480 series grills. May fit other models.

This heat tent replaces original Master Forge part 113-03005.

Part Number: MF1-113-03005-R (Replaces Master Forge MF-113-03005)
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380 (Replaces Master Forge MF-113-03023)
Dimensions: 3 5/16” x 2”
Weight: 0.7

113-03020-R-X4 Ignition electrode and ignition wire assembly. SET OF FOUR (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Master Forge MFA480 and MFA550 series grills. May fit other models.

This Ignition electrode replaces original Master Forge Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-113-03020-R-X4 (Replaces Master Forge MF-113-03020-X4)
Material: ceramic
Weight: 0.1

113-03020-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Master Forge MFA480 and MFA550 series grills. May fit other models.

This Ignition electrode replaces original Master Forge Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-113-03020-R (Replaces Master Forge MF-113-03020)
Material: ceramic
Weight: 0.1

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Electrode with 25” wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04431
Dimensions: 4 3/4” x 4 1/2”
Material: ceramic
Weight: 0.1

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA.

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

This part is currently out of stock, but more are already on the way and expected to arrive early July

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14