Master Forge MFA350BNP Grill Parts

102-03003-R Main Burner - Left for Master Forge model MFA350BNP. Stainless steel. Fits Master Forge MFA350 series grills. May fit other models.

This part replaces original Master Forge burner # 102-03003.

Part Number: MF1-102-03003-R (Replaces Master Forge MF-102-03003)
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 0.9

102-03004-R Main Burner - Right for Master Forge model MFA350BNP. Stainless steel. Fits Master Forge MFA350 series grills. May fit other models.

This part replaces original Master Forge burner # 102-03004.

Part Number: MF1-102-03004-R (Replaces Master Forge MF-102-03004)
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 0.9

102-03003-SET Main Burners for Master Forge model MFA350BNP. Set of two (2) burners, a left and right burner pair. Stainless steel. Fits Master Forge MFA350 series grills. May fit other models.

This part replaces original Master Forge burner # 102-03003 (left burner) and 102-03004 (right burner).

Part Number: MF1-102-03003-SET
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 1.8

101-03011-R Cooking Grate for Master Forge model MFA350BNP. Porcelain treated matte finish cast iron grates. Sold as a 2-piece set.

Fits Master Forge MFA350 series grills. May fit other models.

This grate replaces original Master Forge part 101-03011.

Part Number: MF1-101-03011-R (Replaces Master Forge MF-101-03011)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 19 1/8”
Material: cast iron
Weight: 7.10

101-03005-R-X2 Heat tent for Master Forge model MFA350BNP. Set of two (2). Porcelain enameled steel.

Fits Master Forge MFA350 series grills grills. May fit other models.

This heat tent replaces original Master Forge part 101-03005.

Part Number: MF1-101-03005-R-X2 (Replaces Master Forge MF-101-03005-X2)
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 2.0

101-03005-R Heat tent for Master Forge model MFA350BNP. Porcelain enameled steel. Sold individually.

Fits Master Forge MFA350 series grills grills. May fit other models.

This heat tent replaces original Master Forge part 101-03005.

Part Number: MF1-101-03005-R (Replaces Master Forge MF-101-03005)
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 1.0

101-00301-04-R-X2 Heat tent for Master Forge model MFA350BNP. Set of two (2). Stainless steel.

Fits Master Forge MF350SNP and MF700SSB model grills. May fit other models.

This heat tent replaces original Master Forge part 101-00301-04.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: MF3-101-03001-04-R-X2
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.96

101-00301-04-R Heat tent for Master Forge model MFA350BNP. Stainless steel. Sold individually.

Fits Master Forge MF350SNP and MF700SSB model grills. May fit other models.

This heat tent replaces original Master Forge part 101-00301-04.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: MF3-101-03001-04-R
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 0.98

102-03013-R Ignition electrode and ignition wire assembly. Set of two (2). Fits Master Forge MFA350 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Master Forge part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-102-03013-R-X2 (Replaces Master Forge MF-102-03013-X2)
Material: ceramic
Weight: 0.2

102-03013-R Ignition electrode and ignition wire assembly. Fits Master Forge MFA350 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Master Forge part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: MF1-102-03013-R (Replaces Master Forge MF-102-03013)
Material: ceramic
Weight: 0.1

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB2-B
Weight: 0.3

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Grease pan with a new design made of stainless steel and not an exact duplicate of the original; is a fully functional replacement. Includes grease cup and grease cup holder. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0279 (Replaces Master Forge MF-102-04013)
Dimensions: 7 1/8” x 19 5/16”
Material: stainless steel
Weight: 2.7

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in any grill wide enough inside for the 24” rack.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA.

NOTE: Before ordering this universal rack, please verify your grill has enough space to accommodate it. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Part Number: 00016 (Replaces Master Forge MF-102-02002)
Dimensions: 3” x 3”
Weight: 0.2

Bracket for heat plates, screws & nuts included. Four needed per grill, SOLD INDIVIDUALLY. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0330
Dimensions: 2 5/8” x 1 1/16”
Material: stainless steel
Weight: 0.05

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4