Dyna-Glo Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

TS-IG3007 fits these 3 Dyna-Glo models:
DGB390BNP	DGB390BNP-D	DGB390SNP-D

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

TS-IG2006 fits these 4 Dyna-Glo models:
DGB730SNB	DGB730SNB-D	M365GMDG14	M365GMDG14-D

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 4 Dyna-Glo models:
DGA550SSN	DGA550SSN-D	DGA550SSP	DGA550SSP-D

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-48B fits these 35 Dyna-Glo models:
DGA550SSN DGA550SSN-D DGA550SSP DGA550SSP-D DGB730SNB DGB730SNB-D DGE486BNP	DGE486BNP-D DGE486BSP DGE486BSP-D DGE486GSP DGE486GSP-D DGE486SSP-D DGE530BSP-D	DGE530GSP DGE530GSP-D DGE530SSP DGE530SSP-D DGF486CSP DGF486CSP-D DGF486GRP	DGF486GRP-D DGF486GSP DGF487GRP DGF510SSP DGF510SSP-D DGF530SRP M365GMDG14	M365GMDG14-D M486BBDG14 M486BBDG14-D M486GMDG14 M486GMDG14-D M486RDDG14 M486RDDG14-D

Universal extention wire, male spade end & female round end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 35 Dyna-Glo models:
DGA550SSN DGA550SSN-D DGA550SSP DGA550SSP-D DGB730SNB DGB730SNB-D DGE486BNP	DGE486BNP-D DGE486BSP DGE486BSP-D DGE486GSP DGE486GSP-D DGE486SSP-D DGE530BSP-D	DGE530GSP DGE530GSP-D DGE530SSP DGE530SSP-D DGF486CSP DGF486CSP-D DGF486GRP	DGF486GRP-D DGF486GSP DGF487GRP DGF510SSP DGF510SSP-D DGF530SRP M365GMDG14	M365GMDG14-D M486BBDG14 M486BBDG14-D M486GMDG14 M486GMDG14-D M486RDDG14 M486RDDG14-D

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

IG-20B fits these 10 Dyna-Glo models:
DGB610SSP DGF493BNP	DGF493PNP-D DGF510PBP	DGF510PBP-D DGF510SBP	DGF510SSP DGF510SSP-D	DGH483CRP DGH483CRP-D

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-18B fits this one Dyna-Glo model:
DCP480CSP

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

70-03-105-R Electronic Ignitor. Fits Dyna-Glo DGF510 series grills. May fit other models.

• 1.5 volt
• Has six (6) outlets)
• Uses a single AA battery (not included))
• Requires 7/8” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 70-03-105.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG2-70-03-105-R
Weight: 0.3

DG2-70-03-105-R fits these 2 Dyna-Glo models:
DGF510SSP	DGF510SSP-D

70-03-102-R-X6 Ignition electrode and ignition wire. Set of six (6). Includes 20” wire. Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. May fit other models.

This Ignition electrode and wire replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG2-70-03-102-R-X6
Weight: 1.1

DG2-70-03-102-R-X6 fits this one Dyna-Glo model:
DGF600SSP

70-03-102-R-X5 Ignition electrode and ignition wire. Set of five (5). Includes 20” wire. Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. May fit other models.

This Ignition electrode and wire replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG2-70-03-102-R-X5
Weight: 1.10

DG2-70-03-102-R-X5 fits these 2 Dyna-Glo models:
DGF510SSP	DGF510SSP-D

70-03-102-R Ignition electrode and ignition wire. Includes 20” wire. Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. May fit other models.

This Ignition electrode and wire replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG2-70-03-102-R
Weight: 0.05

DG2-70-03-102-R fits these 3 Dyna-Glo models:
DGF510SSP	DGF510SSP-D	DGF600SSP

144-13007-R Electronic ignition. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

• 1.5 volt
• Has two (2) outlets
• Uses 1 AAA battery (not included)

This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG2-144-13007-R
Weight: 0.3

DG2-144-13007-R fits these 4 Dyna-Glo models:
DGB730SNB	DGB730SNB-D	M365GMDG14	M365GMDG14-D

105-13007-R Electronic Ignitor. Fits Dyna-Glo DGE530 series grills. May fit other models.

• 1.5 volt
• Has six (6) outlets)
• Uses a single AA battery (not included))
• Requires 7/8” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 105-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG2-105-13007-R
Weight: 0.3

DG2-105-13007-R fits these 6 Dyna-Glo models:
DGE530BSP-D DGE530GSP	DGE530GSP-D DGE530SSP	DGE530SSP-D DGF530SRP

70-03-102-R-X6 Ignition electrode and ignition wire. Set of six (6). Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-102-R-X6
Material: ceramic
Weight: 0.05

70-03-102-R-X5 Ignition electrode and ignition wire. Set of five (5). Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-102-R-X5
Material: ceramic
Weight: 0.05

70-03-102-R Ignition electrode and ignition wire. Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-102-R
Material: ceramic
Weight: 0.05

DG1-166-13007-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

• 1.5 volt
• Has five (5) outlets (male spade connector)
• Uses a single AAA battery (not included))
• Requires 3/4” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”.

This Electronic Ignition Module replaces original Dyna-Glo part 166-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-166-13007-R
Weight: 0.7

DG1-166-13007-R fits these 19 Dyna-Glo models:
DGE486BNP DGE486BNP-D DGE486BSP DGE486BSP-D	DGE486GSP DGE486GSP-D DGE486SSP-D DGF486CSP	DGF486CSP-D DGF486GRP DGF486GRP-D DGF486GSP	DGF487GRP M486BBDG14 M486BBDG14-D M486GMDG14	M486GMDG14-D M486RDDG14 M486RDDG14-D

144-13012-R-X2 Ignition electrode and ignition wire assembly. Set of two (2). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13012-R-X2
Material: ceramic
Weight: 0.2

DG1-144-13012-R-X2 fits these 4 Dyna-Glo models:
DGB730SNB	DGB730SNB-D	M365GMDG14	M365GMDG14-D

144-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13012-R
Material: ceramic
Weight: 0.1

DG1-144-13012-R fits these 4 Dyna-Glo models:
DGB730SNB	DGB730SNB-D	M365GMDG14	M365GMDG14-D

144-13007-R Electronic ignition. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13007-R
Weight: 0.3

113-03020-R-X5 Ignition electrode and ignition wire assembly. Set of five (5). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R-X5
Material: ceramic
Weight: 0.1

DG1-113-03020-R-X5 fits these 5 Dyna-Glo models:
DGA480SSP-D	DGA550SSN	DGA550SSN-D	DGA550SSP	DGA550SSP-D

113-03020-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R-X4
Material: ceramic
Weight: 0.1

DG1-113-03020-R-X4 fits these 6 Dyna-Glo models:
DGA480BSN DGA480BSP	DGA480BSP-D DGA480SSN	DGA480SSN-D DGA480SSP

113-03020-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R
Material: ceramic
Weight: 0.1

DG1-113-03020-R fits these 11 Dyna-Glo models:
DGA480BSN DGA480BSP DGA480BSP-D	DGA480SSN DGA480SSN-D DGA480SSP	DGA480SSP-D DGA550SSN DGA550SSN-D	DGA550SSP DGA550SSP-D

105-13012-R-X5 Ignition electrode and ignition wire assembly. Set of five (5) Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R-X5
Material: ceramic
Weight: 0.5

DG1-105-13012-R-X5 fits these 5 Dyna-Glo models:
DGE530BSP-D	DGE530GSP	DGE530GSP-D	DGE530SSP	DGE530SSP-D

105-13012-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R-X4
Material: ceramic
Weight: 0.4

DG1-105-13012-R-X4 fits these 18 Dyna-Glo models:
DGE486BNP DGE486BNP-D DGE486BSP DGE486BSP-D	DGE486GSP DGE486GSP-D DGE486SSP-D DGF486CSP	DGF486CSP-D DGF486GSP DGF487GRP DGF530SRP	M486BBDG14 M486BBDG14-D M486GMDG14 M486GMDG14-D	M486RDDG14 M486RDDG14-D

105-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R
Material: ceramic
Weight: 0.1

DG1-105-13012-R fits these 25 Dyna-Glo models:
DGE486BNP DGE486BNP-D DGE486BSP DGE486BSP-D DGE486GSP	DGE486GSP-D DGE486SSP-D DGE530BSP-D DGE530GSP DGE530GSP-D	DGE530SSP DGE530SSP-D DGF486CSP DGF486CSP-D DGF486GRP	DGF486GRP-D DGF486GSP DGF487GRP DGF530SRP M486BBDG14	M486BBDG14-D M486GMDG14 M486GMDG14-D M486RDDG14 M486RDDG14-D

104-13012-R-X3 Ignition electrode and ignition wire assembly. Set of three (3). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB390 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 104-13012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13012-R-X3
Material: ceramic
Weight: 0.1

DG1-104-13012-R-X3 fits these 3 Dyna-Glo models:
DGB390BNP	DGB390BNP-D	DGB390SNP-D

104-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB390 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 104-13012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13012-R
Material: ceramic
Weight: 0.1

DG1-104-13012-R fits these 3 Dyna-Glo models:
DGB390BNP	DGB390BNP-D	DGB390SNP-D

104-13007-R Electronic ignition. Three-outlet battery powered push button ignitor. Fits Dyna-Glo DGB390 series grills. May fit other models.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 104-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13007-R
Dimensions: 2 9/16” x 2”
Weight: 0.5

DG1-104-13007-R fits these 3 Dyna-Glo models:
DGB390BNP	DGB390BNP-D	DGB390SNP-D

102-03013-R Ignition electrode and ignition wire assembly. Fits Dyna-Glo DGP350 and DGP700 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-102-03013-R
Material: ceramic
Weight: 0.1

DG1-102-03013-R fits these 4 Dyna-Glo models:
DGP350SNP	DGP350SNP-D	DGP700SSB	DGP700SSB-D

101-03001-12-R-X2 Ignition electrode and ignition wire assembly. Set of two (2). Includes 8” wire. Fits Dyna-Glo DGP350NP grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 101-03001-12.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-101-03001-12-R-X2
Material: ceramic
Weight: 0.2

DG1-101-03001-12-R-X2 fits these 2 Dyna-Glo models:
DGP350NP	DGP350NP-D

101-03001-12-R Ignition electrode and ignition wire assembly. Includes 8” wire. Fits Dyna-Glo DGP350NP grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 101-03001-12.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-101-03001-12-R
Material: ceramic
Weight: 0.1

DG1-101-03001-12-R fits these 2 Dyna-Glo models:
DGP350NP	DGP350NP-D

Burner mounted electrode. Mounts to flange on underside of burner.

• Ceramic insulator
• Mounting bracket with nut and bolt
• 8” wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04820
Material: ceramic
Weight: 0.1

04820 fits this one Dyna-Glo model:
DCP480CSP

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

SearPLUS™ burner sparker.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02361
Dimensions: 3 1/4
Material: ceramic
Weight: 0.1

02361 fits these 2 Dyna-Glo models:
DGH483CRP	DGH483CRP-D

Electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 00161
Dimensions: 3 1/2” x 0 7/8”
Material: ceramic
Weight: 1.0

00161 fits this one Dyna-Glo model:
DGB310SSP