Dyna-Glo M486RDDG14-D Grill Parts

105-13011-R-X4 Main Burner, Set of four (4) burners for Dyna-Glo model M486RDDG14-D. Stainless steel. Fits Dyna-Glo models DGE486BSP, DGE486GSP, DGE486SSP, DGE530BSP, DGE530GSP, DGE530SSP, and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG2-105-13011-R-X4 (Replaces Dyna-Glo DYG-105-13011-X4)
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 2.1

105-13011-R Main Burner for Dyna-Glo model M486RDDG14-D. Stainless steel. Fits Dyna-Glo models DGE486BSP, DGE486GSP, DGE486SSP, DGE530BSP, DGE530GSP, DGE530SSP, and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG2-105-13011-R (Replaces Dyna-Glo DYG-105-13011)
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 0.5

166-13002-R-X3Cooking Grate for Dyna-Glo model M486RDDG14-D. Set of three (3) grates. Porcelain treated, matte finish cast iron grate. Sold individually.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG2-166-13002-R-X3 (Replaces Dyna-Glo DYG-166-13002-X3)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 12.1

166-13002-RCooking Grate for Dyna-Glo model M486RDDG14-D. Porcelain treated, matte finish cast iron grate. Sold individually.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG2-166-13002-R (Replaces Dyna-Glo DYG-166-13002)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 4.0

Cast iron cooking grids (set of 4) for Dyna-Glo model M486RDDG14-D. Porcelain enameled, glossy finish.

Part Number: 69594
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 33 3/16”
Material: gloss cast iron
Weight: 13.10

105-13003-R-X4 Heat tent for Dyna-Glo model M486RDDG14-D. Set of four (4). Stainless steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG2-105-13003-R-X4 (Replaces Dyna-Glo DYG-105-13003-X4)
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 3.4

105-13003-R Heat tent for Dyna-Glo model M486RDDG14-D. Stainless steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG2-105-13003-R (Replaces Dyna-Glo DYG-105-13003)
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 0.85

105-13012-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R-X4 (Replaces Dyna-Glo DYG-105-13012-X4)
Material: ceramic
Weight: 0.4

105-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R (Replaces Dyna-Glo DYG-105-13012)
Material: ceramic
Weight: 0.1

DG1-166-13007-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

• 1.5 volt
• Has five (5) outlets (male spade connector)
• Uses a single AAA battery (not included))
• Requires 3/4” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”.

This Electronic Ignition Module replaces original Dyna-Glo part 166-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-166-13007-R (Replaces Dyna-Glo DYG-166-13007)
Weight: 0.7

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Part Number: 00016 (Replaces Dyna-Glo DYG-104-12005)
Dimensions: 3” x 3”
Weight: 0.2

Universal four piece mini thermometer set. Great gift idea.

• 2 calibrated for steak, and 2 for chicken
• Mini thermometers for testing doneness of individual cuts of meat
• Silicone bezels for easy removal when hot
• Always use caution when handling hot objects

Part Number: 11381
Weight: .25

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Stainless steel jalapeno pepper tray.Cook all the heat from a jalapeño and you’re left with a fabulous taste of the southwest that leaves your taste buds singing for hours.

• Constructed of 304 stainless steel
• Measures 9-1/2” x 6-1/2”
• Holds up-to 24 jalapeño peppers
• American-Made

Part Number: JPT
Dimensions: 14 1/4” x 6”
Material: stainless steel
Weight: 0.6

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0