Dyna-Glo DGA480BSP Grill Parts

113-03003-R-X4 Main Burner for Dyna-Glo model DGA480BSP. Set of four (4). Stainless steel. Fits Dyna-Glo DGA480 series grills including:

• DGA480BSP
• DGA480SSP
• DGA550SSP

May fit other models.

This part replaces original Dyna-Glo burner # 113-03003.

Part Number: DG1-113-03003-R-X4 (Replaces Dyna-Glo DYG-113-03003-X4)
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 2.1

113-03003-R Main Burner for Dyna-Glo model DGA480BSP. Stainless steel. Fits Dyna-Glo DGA480 series grills including:

• DGA480BSP
• DGA480SSP
• DGA550SSP

May fit other models.

This part replaces original Dyna-Glo burner # 113-03003.

Part Number: DG1-113-03003-R (Replaces Dyna-Glo DYG-113-03003)
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

113-03015-R Cooking Grate set for Dyna-Glo model DGA480BSP. Porcelain enamel glossy finish cast iron grates. The 480 series grills originally came with two 13” grates, which are no longer available. This three (3) piece replacement set is the same total width as two of the originals.

Fits Dyna-Glo DGA480 series grills. May fit other models.

This grate set replaces two (2) of original Dyna-Glo part 113-03015.

Part Number: DG1-113-03015-R (Replaces Dyna-Glo DYG-113-03015)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 1/4”
Material: glossy cast iron
Weight: 10.5

113-03005-R-X4 Heat tent for Dyna-Glo model DGA480BSP. Porcelain enameled steel. Set of four..

Fits Dyna-Glo DGA480 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 113-03005.

Part Number: DG1-113-03005-R-X4 (Replaces Dyna-Glo DYG-113-03005-X4)
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

113-03005-R Heat tent for Dyna-Glo model DGA480BSP. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGA480 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 113-03005.

Part Number: DG1-113-03005-R (Replaces Dyna-Glo DYG-113-03005)
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380 (Replaces Dyna-Glo DYG-113-03023)
Dimensions: 3 5/16” x 2”
Weight: 0.7

113-03020-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R-X4 (Replaces Dyna-Glo DYG-113-03020-X4)
Material: ceramic
Weight: 0.1

113-03020-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R (Replaces Dyna-Glo DYG-113-03020)
Material: ceramic
Weight: 0.1

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in any grill wide enough inside for the 24” rack.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA.

NOTE: Before ordering this universal rack, please verify your grill has enough space to accommodate it. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.


Part Number: SSST
Material: stainless steel
Weight: 1.5

5-piece unique tennis oriented utensil set. Constructed of heavy stainless steel with ”tennis grips” on each utensil. Includes yellow tennis ball style salt & pepper shakers, along with spatula, fork and tong.

Makes a nice gift.for tennis-minded folks

Part Number: US10
Weight: 5.00

Part Number: 00185
Material: stainless
Weight: .3

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Porcelain Coated Grill Topper.
11” x 16” Single draw construction for improved rigidity. Stainless steel handles and raised contours for improved functionality.

Part Number: 97122
Dimensions: 16” x 11 1/2”
Material: porcelain steel
Weight: 1.10

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3