Dyna-Glo DGF486CSP Grill Parts

105-13011-R-X4 Main Burner, Set of four (4) burners for Dyna-Glo model DGF486CSP. Stainless steel. Fits Dyna-Glo models DGE486BSP, DGE486GSP, DGE486SSP, DGE530BSP, DGE530GSP, DGE530SSP, and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG2-105-13011-R-X4 (Replaces Dyna-Glo DYG-105-13011-X4)
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 2.1

105-13011-R Main Burner for Dyna-Glo model DGF486CSP. Stainless steel. Fits Dyna-Glo models DGE486BSP, DGE486GSP, DGE486SSP, DGE530BSP, DGE530GSP, DGE530SSP, and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG2-105-13011-R (Replaces Dyna-Glo DYG-105-13011)
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 0.5

166-13002-R-X3Cooking Grate for Dyna-Glo model DGF486CSP. Set of three (3) grates. Porcelain treated, matte finish cast iron grate. Sold individually.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG2-166-13002-R-X3 (Replaces Dyna-Glo DYG-166-13002-X3)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 12.1

166-13002-RCooking Grate for Dyna-Glo model DGF486CSP. Porcelain treated, matte finish cast iron grate. Sold individually.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG2-166-13002-R (Replaces Dyna-Glo DYG-166-13002)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 4.0

105-13003-R-X4 Heat tent for Dyna-Glo model DGF486CSP. Set of four (4). Stainless steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG2-105-13003-R-X4 (Replaces Dyna-Glo DYG-105-13003-X4)
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 3.4

105-13003-R Heat tent for Dyna-Glo model DGF486CSP. Stainless steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG2-105-13003-R (Replaces Dyna-Glo DYG-105-13003)
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: stainless steel
Weight: 0.85

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

105-13012-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R-X4 (Replaces Dyna-Glo DYG-105-13012-X4)
Material: ceramic
Weight: 0.4

105-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R (Replaces Dyna-Glo DYG-105-13012)
Material: ceramic
Weight: 0.1

DG1-166-13007-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

• 1.5 volt
• Has five (5) outlets (male spade connector)
• Uses a single AAA battery (not included))
• Requires 3/4” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”.

This Electronic Ignition Module replaces original Dyna-Glo part 166-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-166-13007-R (Replaces Dyna-Glo DYG-166-13007)
Weight: 0.7

GrillPro Wood chips from genuine oak whiskey barrels.

• All natural wood smoke flavor
• Great for use in BBQ's or smokers.
• 170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Dimensions: 16” x 4”
Material: chrome steel
Weight: 0.9

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

• Ideal for searving or grilling appetizers
• Wide end for easy handling

Part Number: 11040
Dimensions: 7
Weight: 0.4

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Porcelain Coated Square Wok Topper.
12” x 12” x 2” porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.

Part Number: 98121
Dimensions: 12” x 12”
Material: porcelain steel
Weight: 1.6

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0