Grill-Parts home

Dyna-Glo DGB730SNB-D Grill Parts

 

 

Highest quality replacement parts for your Dyna-Glo DGB730SNB-D - Free USA shipping $49 or more* - No Sales Tax*

 

Dyna-Glo DGB730SNB-D owners manual and diagrams
Diagrams & owners manual not available for grill model# DGB730SNB-D. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement BBQ grill parts for Dyna-Glo model: DGB730SNB-D
All of the parts we have for Dyna-Glo DGB730SNB-D are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Dyna-Glo grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Dyna-Glo DGB730SNB-D BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Dyna-Glo model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


DGB730SNB-D Burners

DYG-104-13011-X2 / DG1-104-13011-R-X2
Click for photos

104-13011-R-X2 Main Burner, Set of two (2) for Dyna-Glo model DGB730SNB-D. Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

  • DGB390BNP
  • DGB390SNP
  • DGB730SNB
  • M365 Series
May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.



Part Number: DG1-104-13011-R-X2 (Replaces Dyna-Glo DYG-104-13011-X2)
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 1.1

$64.32
 

DYG-104-13011 / DG1-104-13011-R
Click for photos

104-13011-R Main Burner for Dyna-Glo model DGB730SNB-D. Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

  • DGB390BNP
  • DGB390SNP
  • DGB730SNB
  • M365 Series
May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.



Part Number: DG1-104-13011-R (Replaces Dyna-Glo DYG-104-13011)
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

$34.77
 

==> All Dyna-Glo Burners.
 





DGB730SNB-D Cooking Grids

DYG-144-13002 / DG1-144-13002-R
Click for photos

144-13002-R Cooking Grates for Dyna-Glo model DGB730SNB-D. Porcelain treated, matte finish cast iron grates. Set of two.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This grate replaces original Dyna-Glo part 144-13002.



Part Number: DG1-144-13002-R (Replaces Dyna-Glo DYG-144-13002)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 19 1/8”
Material: cast iron
Weight: 8.11

$91.52
 

==> All Dyna-Glo Cooking Grids.
 





DGB730SNB-D Heat Plates

DYG-144-13003-X2 / DG1-144-13003-R-X2
Click for photos

144-13003-R-X2 Heat tent for Dyna-Glo model DGB730SNB-D. Set of two (2). Porcelain enameled steel.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.



Part Number: DG1-144-13003-R-X2 (Replaces Dyna-Glo DYG-144-13003-X2)
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 1.0

$56.48
 

DYG-144-13003 / DG1-144-13003-R
Click for photos

144-13003-R Heat tent for Dyna-Glo model DGB730SNB-D. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.



Part Number: DG1-144-13003-R (Replaces Dyna-Glo DYG-144-13003)
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 0.5

$29.96
 

==> All Dyna-Glo Heat Plates.
 





DGB730SNB-D Igniter Components

DYG-144-13012-X2 / DG1-144-13012-R-X2
Click for photos

144-13012-R-X2 Ignition electrode and ignition wire assembly. Set of two (2). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DG1-144-13012-R-X2 (Replaces Dyna-Glo DYG-144-13012-X2)
Material: ceramic
Weight: 0.2

$23.90
 

DYG-144-13012 / DG1-144-13012-R
Click for photos

144-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DG1-144-13012-R (Replaces Dyna-Glo DYG-144-13012)
Material: ceramic
Weight: 0.1

$12.47
 

DYG-144-13007 / DG2-144-13007-R
Click for photos

144-13007-R Electronic ignition. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

  • 1.5 volt
  • Has two (2) outlets
  • Uses 1 AAA battery (not included)

This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DG2-144-13007-R (Replaces Dyna-Glo DYG-144-13007)
Weight: 0.3

$19.40
 

TS-IG2006
Click for photos
Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG2006
Weight: 0.2

$19.40
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 

==> All Dyna-Glo Igniter Components.
 





DGB730SNB-D Grease Trays

DYG-144-04013 / 144-04013-R
Click for photos
Replacement stainless steel grease pan with grease cup and holder. Includes side bracket and attached bottom heat shield (9 1/2” x 9 1/2”). Made in USA.

Part Number: 144-04013-R (Replaces Dyna-Glo DYG-144-04013)
Dimensions: 18 3/4” x 15 7/16”
Material: stainless steel
Weight: 4.20

$80.22
 

==> All Dyna-Glo Grease Trays.
 





DGB730SNB-D Heat indicators and Meat Thermometers

DYG-104-12005 / 00016
Click for photos
Round heat indicator.
  • Single probe
  • 3” diameter
  • Requires 3/8” mounting hole


Part Number: 00016 (Replaces Dyna-Glo DYG-104-12005)
Dimensions: 3” x 3”
Weight: 0.2

$18.21
 

==> All Dyna-Glo Heat indicators and Meat Thermometers.
 





DGB730SNB-D Accessories

00220
Click for photos
GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

$6.87
 

40259
Click for photos
15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92
 

40538
Click for photos
Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

$15.59
 

42055
Click for photos

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.



Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76
 

RR-2
Click for photos
Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.


Part Number: RR-2
Material: chrome steel
Weight: 1.0

$13.30
 
SALE  $14.99

BRACT
Click for photos
Stainless Steel Ash Cleaning Tray For Use In Ceramic Kamado Grills

Part Number: BRACT
Weight: 1.0

$32.84
 

==> All DGB730SNB-D Accessories.
 



BBQ Part Categories
















 
 

Dyna-Glo gas grill DGB730SNB-D - Tuesday, May 12 2026

Return to Dyna-Glo grills main page



More Dyna-Glo grill models we have parts for
M486BBDG14 | M486BBDG14-D | M486GMDG14 | M486GMDG14-D | M486RDDG14 | M486RDDG14-D | RMF495ANP | RMF495ANP-D | BGB390SNP | BGE530BSP | BGE530PSP | CMB495CDP | CMB495CDP-D | CMB510RSP | CMB510RSP-D | CMB510SSP | CMB510SSP-D | DCP480CSP | DGA480BSN | DGA480BSP | DGA480BSP-D | DGA480SSN | DGA480SSN-D | DGA480SSP | DGA480SSP-D | DGA550SSN | DGA550SSN-D | DGA550SSP | DGA550SSP-D | DGB300CNP | DGB300CNP-D | DGB310SSP | DGB365ANP | DGB365GNP | DGB390BNP | DGB390BNP-D | DGB390CNP | DGB390GNP-D | DGB390SNP | DGB390SNP-D | DGB390SNP-DC | DGB463CNP | DGB493SPB | DGB494SPB | DGB495ADP | DGB495ANP | DGB495SDP | DGB495SDP-D | DGB510SSP | DGB510SSP-D | Complete list of Dyna-Glo grill models...



*Orders for Dyna-Glo grill model DGB730SNB-D $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026