Grill-Parts home

Dyna-Glo DGF510SSP-D Grill Parts

 

 

Highest quality replacement parts for your Dyna-Glo DGF510SSP-D - Free USA shipping $49 or more* - No Sales Tax*

 

Dyna-Glo DGF510SSP-D owners manual and diagrams
Diagrams & owners manual not available for grill model# DGF510SSP-D. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement gas grill parts for Dyna-Glo model: DGF510SSP-D
All of the parts we have for Dyna-Glo DGF510SSP-D are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Dyna-Glo grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Dyna-Glo DGF510SSP-D BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Dyna-Glo model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


DGF510SSP-D Burners

DYG-70-01-180-X5 / DG1-70-01-180-R-X5
Click for photos

70-01-180-R-X5 Main Burner for Dyna-Glo model DGF510SSP-D. Set of five (5). Stainless steel. Fits Dyna-Glo DGF510 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 70-01-180.



Part Number: DG1-70-01-180-R-X5 (Replaces Dyna-Glo DYG-70-01-180-X5)
Dimensions: 17 7/16” x 1”
Material: stainless steel
Weight: 3.1

$136.25
 

DYG-70-01-180 / DG1-70-01-180-R
Click for photos

70-01-180-R Main Burner for Dyna-Glo model DGF510SSP-D. Stainless steel. Fits Dyna-Glo DGF510 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 70-01-180.



Part Number: DG1-70-01-180-R (Replaces Dyna-Glo DYG-70-01-180)
Dimensions: 17 7/16” x 1”
Material: stainless steel
Weight: 0.6

$33.45
 

==> All Dyna-Glo Burners.
 





DGF510SSP-D Cooking Grids

DYG-70-01-178 / DG1-70-01-178-R
Click for photos

70-01-178-R Cooking Grate for Dyna-Glo model DGF510SSP-D. Porcelain enameled glossy finish cast iron grates. Sold as a 3-piece set.

Fits Dyna-Glo DGF510 series grills. May fit other models.

This grate replaces original Dyna-Glo part 70-01-178.



Part Number: DG1-70-01-178-R (Replaces Dyna-Glo DYG-70-01-178)
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 29 5/8”
Material: gloss cast iron
Weight: 11.3

$104.11
 

==> All Dyna-Glo Cooking Grids.
 





DGF510SSP-D Heat Plates

DG3-70-01-179-SS-X5
Click for photos

70-01-179-SS-X5 Heat tent for Dyna-Glo model DGF510SSP-D. Set of five (5). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: DG3-70-01-179-SS-X5
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 3.5

$73.95
 

DG3-70-01-179-SS
Click for photos

70-01-179-SS Heat tent for Dyna-Glo model DGF510SSP-D. Stainless steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: DG3-70-01-179-SS
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

$23.42
 

==> All Dyna-Glo Heat Plates.
 





DGF510SSP-D Igniter Components

DYG-70-03-102-X5 / DG2-70-03-102-R-X5
Click for photos

70-03-102-R-X5 Ignition electrode and ignition wire. Set of five (5). Includes 20” wire. Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. May fit other models.

This Ignition electrode and wire replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DG2-70-03-102-R-X5 (Replaces Dyna-Glo DYG-70-03-102-X5)
Weight: 1.10

$30.60
 

DYG-70-03-102 / DG2-70-03-102-R
Click for photos

70-03-102-R Ignition electrode and ignition wire. Includes 20” wire. Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. May fit other models.

This Ignition electrode and wire replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DG2-70-03-102-R (Replaces Dyna-Glo DYG-70-03-102)
Weight: 0.05

$6.61
 

DYG-70-03-105 / DG2-70-03-105-R
Click for photos

70-03-105-R Electronic Ignitor. Fits Dyna-Glo DGF510 series grills. May fit other models.

  • 1.5 volt
  • Has six (6) outlets)
  • Uses a single AA battery (not included))
  • Requires 7/8” mounting hole
This Electronic Ignition Module replaces original Dyna-Glo part 70-03-105.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DG2-70-03-105-R (Replaces Dyna-Glo DYG-70-03-105)
Weight: 0.3

$37.92
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 

IG-20B
Click for photos
Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-20B
Weight: 0.05

$6.61
 

==> All Dyna-Glo Igniter Components.
 





DGF510SSP-D Grease Trays

DYG-70-01-186 / CLA-DS0248
Click for photos
Stainless steel grease tray has drip hole and includes a grease cup holder and a mini bucket. Made in USA.
NOTE: The grease cup holder can be enlarged to accept an empty common soup can.


Part Number: CLA-DS0248 (Replaces Dyna-Glo DYG-70-01-186)
Dimensions: 15” x 28 9/16”
Material: stainless steel
Weight: 4.5

$131.43
 
SALE  $99.99

==> All Dyna-Glo Grease Trays.
 





DGF510SSP-D Heat indicators and Meat Thermometers

DYG-70-04-100 / 072-6800-0
Click for photos
Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0 (Replaces Dyna-Glo DYG-70-04-100)
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

$9.95
 

==> All Dyna-Glo Heat indicators and Meat Thermometers.
 





DGF510SSP-D Accessories

00220
Click for photos
GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

$6.87
 

40259
Click for photos
15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92
 

41338
Click for photos
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60
 

14913
Click for photos

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.



Part Number: 14913
Material: stailess steel
Weight: 0.5

$14.41
 

50426
Click for photos
Aluminum foil grilling trays. Package of three.
  • Heavy duty aluminum foil
  • Re-usable
  • Great for grilling delicate foods like fish and veggies


Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64
 

SDDPS
Click for photos
Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30

$18.07
 

==> All DGF510SSP-D Accessories.
 



BBQ Part Categories
















 
 

Dyna-Glo model DGF510SSP-D - Tuesday, May 12 2026

Return to Dyna-Glo grill parts main page



More Dyna-Glo grill models we have parts for
DGF486GRP | DGF486GRP-D | DGF486GSP | DGF487GRP | DGF493BNP | DGF493PNP-D | DGF510PBP | DGF510PBP-D | DGF510SBP | DGF510SSP | DGF530SRP | DGF600SSP | DGH483CRP | DGH483CRP-D | DGH485CRP | DGH485CRP-D | DGJ810CSB-D | DGN405DNC | DGN405DNC-D | DGN405SNC | DGN405SNC-D | DGN486DNC | DGN486DNC-D | DGN486SNC | DGN486SNC-D | DGN576DNC-D | DGN576SNC-D | DGP321SNN-D | DGP321SNP-D | DGP350NP | DGP350NP-D | DGP350SNP | DGP350SNP-D | DGP480CSP | DGP480CSP-D | DGP483SSN-D | DGP483SSP-D | DGP552SSN-D | DGP552SSP-D | DGP700SSB | DGP700SSB-D | DGP730SNB-D | DGSS287CB | DGSS287CB-D | DGSS675CB | DGSS675CB-D | DGSS962CBO | DGSS962CBO-D | GCB463RNP | Complete list of Dyna-Glo grill models...



*Orders for Dyna-Glo grill model DGF510SSP-D $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026