Vermont Castings Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-7B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut. Color can varies gray or black by manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: TS-IG4010
Weight: 0.2

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 4 Vermont Castings models:
VCS3008	VCS3018	VCS3028	VCS3038

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-7B fits these 8 Vermont Castings models:
CF9030LP CF9030N	VC0620AP-NP VC0620P	VC0680AP VC0680AP-NP	VC0680N VC0680P

Ignitor collector box and electrode for thru casting mounts. Preassembled. Includes:

• Collector box and ceramic electrode with male spade connector
• Locking nuts and washer
• Ground lug (not shown)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-4B
Weight: 0.3

IG-4B fits these 6 Vermont Castings models:
VC0620AP-NP VC0620P	VC0680AP VC0680AP-NP	VC0680N VC0680P

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-48B fits these 13 Vermont Castings models:
G36601 G36602 VC0620AP-NP	VC0620P VC0680AP VC0680AP-NP	VC0680N VC0680P VCS3008	VCS3018 VCS3028 VCS3038	Vanguard 3-Burner

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 4 Vermont Castings models:
VCS3008	VCS3018	VCS3028	VCS3038

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

IG-20B fits these 115 Vermont Castings models:
CF9030 CF9030LP CF9030N CF9050 CF9055 CF9055-3A CF9055-3B	CF9055LP CF9055N CF9056 CF9080 CF9085 CF9085-3A CF9085-3B	CF9086 Experience Extreme Extreme Built-in Extreme Limited Edition Marvel Sizzler	Sizzler Built-in VC100-A VC100-B VC100-C VC200-A VC200-B VC200-C	VC200-D VC200-E VC30 VC3505 VC400-A VC400-B 81 more models...

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-18B fits these 39 Vermont Castings models:
CF9055 CF9055LP CF9055N Experience Extreme Extreme Built-in Extreme Limited Edition	Marvel Sizzler Sizzler Built-in VC0620AP-NP VC0620P VC0680AP VC0680AP-NP	VC0680N VC0680P VC3505 VCS3000 VCS3500 VCS3500BI VCS3505	VCS3505BI VCS4005 VCS4006P VCS4007P VCS500 VCS5000 VCS5000BI	VCS5005 VCS5006BI VM400XBN VM400XBP VM400XVP VM448 5 more models...

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

Battery powered push button Igniter Kit.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” mounting hole.

NOTE: Part 50000816-R is a fully functional aftermarket replacement for Vermont Castings OEM part# 50000816, which is no longer available.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 50000816-R
Weight: 0.3

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

10342-T14 fits these 8 Vermont Castings models:
CF9030LP CF9030N	VC0620AP-NP VC0620P	VC0680AP VC0680AP-NP	VC0680N VC0680P

Collector box and ceramic electrode with male spade connector. Mounts perpendicular through casting with threaded rod and locking nuts. Includes igniter ground lug, but no ground wire, see ground wire 03620.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03800
Material: ceramic
Weight: 0.2

03800 fits these 6 Vermont Castings models:
VC0620AP-NP VC0620P	VC0680AP VC0680AP-NP	VC0680N VC0680P

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Remote switch kit with wiring harnes for some Weber and Vermont Casting grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03154
Material: plastic
Weight: 0.1

03154 fits these 8 Vermont Castings models:
G36601 G36602	G53901 G53902	G54001 G54002	Vanguard 2-Burner Vanguard 3-Burner