Vermont Castings CF9085-3A Grill Parts

Burner mounting plate for Vermont Castings model CF9085-3A. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.

• Sold individually, number required varies. Use one per burner.
• Includes mounting bolt and nut
• Includes extra holes for mounting to grill, if necessary.
• Comes with complete installation instructions.

For models:

• CF9080/85/86
• VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
• VCS3507/4007/5007/3507BI/5007BI

Made in USA

Part Number: CLA-MS0227
Dimensions: 3 3/4” x 4 15/16”
Material: stainless steel
Weight: 0.11

Commercial premium grade stainless steel burner for Vermont Castings model CF9085-3A.


Part Number: VTB1 (Replaces Vermont Castings 50003100)
Dimensions: 17
Material: stainless steel
Weight: 1.0

Cast iron cooking grid for Vermont Castings model CF9085-3A. Porcelain treated, matte finish. Sold individually, number required varies by grill model.


Part Number: CG-59P-CI (Replaces Vermont Castings 50001227)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 9 1/4”
Material: cast iron
Weight: 5.45

SET OF THREE/3 PACK Stainless steel Flame Tamer for Vermont Castings model CF9085-3A. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6

Stainless steel Flame Tamer for Vermont Castings model CF9085-3A. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016 (Replaces Vermont Castings 50000777)
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B (Replaces Vermont Castings 50000431)
Weight: 0.05

Stainless steel grease tray. Made in USA.

NOTE: Please measure your old grease tray to insure you're ordering the correct part. Vermont Castings made these in several lengths, two of which we currently offer.

Part Number: CLA-DG0068 (Replaces Vermont Castings 50002157)
Dimensions: 8 1/2” x 33 3/4”
Material: stainless steel
Weight: 4.4

Five piece 3/8” natural gas quick disconnect set includes:

• Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
• Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
• Hansen & Sturgis dust cover
• plastic dust plug
• Plastic 3/8 MPT Snap Tite
• Suitable up to approximately 60,000 BTU.

Part Number: ASCPL-1
Weight: 3.0

Brass 3/8” Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-3
Weight: 0.4

12ft vinyl 3/8” ID natural gas Sturgis hose (inside diameter 3/8” and outside diameter about 1/2”) with solid brass fittings. Use with brass coupler part# ASCPL-3 (not included). See part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-2 (Replaces Vermont Castings 50000198)
Weight: 2.5

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30