Vermont Castings VM448P Grill Parts

Highest quality replacement parts for your Vermont Castings VM448P - Free USA shipping $49 or more* - No Sales Tax*

Vermont Castings VM448P owners manual and diagrams

Diagrams & owners manual not available for grill model# VM448P. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Vermont Castings model: VM448P

This page shows all of the parts we know fit model Vermont Castings VM448P. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Vermont Castings grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Vermont Castings VM448P BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Vermont Castings model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

VM448P Burners

Click for photos

Stainless Steel Tube Burner for Newer Vermont Casting Grills for Vermont Castings model VM448P.

Part Number: VTB2 (Replaces Vermont Castings 50004240)
Dimensions: 17
Material: stainless steel
Weight: 1.0

==> All Vermont Castings Burners.

VM448P Burner Brackets and Carryovers

Click for photos

Stainless steel Flash Tube burner support bracket. Made in USA.

Part Number: CLA-MS0112 (Replaces Vermont Castings 50001300B)
Dimensions: 2” x 13 1/4”
Material: stainless steel
Weight: 0.30

==> All Vermont Castings Burner Brackets and Carryovers.

VM448P Cooking Grids

Click for photos

Cast iron cooking grid for Vermont Castings model VM448P. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-59P-CI
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 9 1/4”
Material: cast iron
Weight: 5.45

==> All Vermont Castings Cooking Grids.

VM448P Heat Plates

Click for photos

SET OF THREE/3 PACK Stainless steel Flame Tamer for Vermont Castings model VM448P. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6

Click for photos

Stainless steel Flame Tamer for Vermont Castings model VM448P. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016 (Replaces Vermont Castings 50000877)
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3

==> All Vermont Castings Heat Plates.

VM448P Igniter Components

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B (Replaces Vermont Castings 50000431)
Weight: 0.05

==> All Vermont Castings Igniter Components.

VM448P Regulators and Hoses

Click for photos

Five piece 3/8” natural gas quick disconnect set includes:

Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
Hansen & Sturgis dust cover
plastic dust plug
Plastic 3/8 MPT Snap Tite
Suitable up to approximately 60,000 BTU.

Part Number: ASCPL-1
Weight: 3.0

Click for photos

Brass 3/8” Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-3
Weight: 0.4

Click for photos

12ft vinyl 3/8” ID natural gas Sturgis hose (inside diameter 3/8” and outside diameter about 1/2”) with solid brass fittings. Use with brass coupler part# ASCPL-3 (not included). See part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-2 (Replaces Vermont Castings 50000198)
Weight: 2.5

==> All Vermont Castings Regulators and Hoses.

BBQ Part Categories

Vermont Castings model VM448P - Monday, Jun 23 2025

Return to Vermont Castings grills main page

More Vermont Castings grill models we have parts for
G36602 \| G53901 \| G53902 \| G54001 \| G54002 \| Marvel \| Sizzler \| Sizzler Built-in \| VC0620AP-NP \| VC0620P \| VC0680AP \| VC0680AP-NP \| VC0680N \| VC0680P \| VC100-A \| VC100-B \| VC100-C \| VC200-A \| VC200-B \| VC200-C \| VC200-D \| VC200-E \| VC2002BN \| VC30 \| VC3505 \| VC400-A \| VC400-B \| VC400-C \| VC400-D \| VC50-A \| VC50-B \| VC500 \| VC75-A \| VC75-B \| VCS3000 \| VCS3006 \| VCS3008 \| VCS3018 \| VCS3028 \| VCS3038 \| VCS3500 \| VCS3500BI \| VCS3505 \| VCS3505BI \| VCS3506 \| VCS3507 \| VCS3507BI \| VCS3517 \| VCS4000 \| VCS4005 \| Complete list of Vermont Castings grill models...

More Vermont Castings grill models we have parts for

G36602 | G53901 | G53902 | G54001 | G54002 | Marvel | Sizzler | Sizzler Built-in | VC0620AP-NP | VC0620P | VC0680AP | VC0680AP-NP | VC0680N | VC0680P | VC100-A | VC100-B | VC100-C | VC200-A | VC200-B | VC200-C | VC200-D | VC200-E | VC2002BN | VC30 | VC3505 | VC400-A | VC400-B | VC400-C | VC400-D | VC50-A | VC50-B | VC500 | VC75-A | VC75-B | VCS3000 | VCS3006 | VCS3008 | VCS3018 | VCS3028 | VCS3038 | VCS3500 | VCS3500BI | VCS3505 | VCS3505BI | VCS3506 | VCS3507 | VCS3507BI | VCS3517 | VCS4000 | VCS4005 | Complete list of Vermont Castings grill models...