Grill-Parts home

Charbroil Performance 463244819 Grill Parts

Charbroil logo

 

 

Highest quality replacement parts for your Charbroil Performance 463244819 - Free USA shipping $49 or more* - No Sales Tax*

 

Charbroil 463244819 owners manual and diagrams
Diagrams & owners manual not available for grill model# 463244819. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement gas grill parts for Charbroil Performance 463244819
This page shows all of the parts we know fit model Charbroil 463244819. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Charbroil grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Charbroil 463244819 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Charbroil model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


463244819 Burners

10081
Click for photos
stainless steel burner for Charbroil model 463244819.

Part Number: 10081
Dimensions: 17 3/4” x 0 5/8”
Material: stainless steel
Weight: 0.4

$51.39
 

==> All Charbroil Burners.
 





463244819 Burner Brackets and Carryovers

00061
Click for photos
stainless steel cross-over

Part Number: 00061
Dimensions: 5 3/4” x 0 3/4”
Material: stainless steel
Weight: 0.1

$14.41
 

==> All Charbroil Burner Brackets and Carryovers.
 





463244819 Cooking Grids

60064
Click for photos
matte finish cast iron cooking grid for Charbroil model 463244819.

Part Number: 60064
Dimension Front-to-Back: 18 3/16”
Dimension Side-to-Side: 34 1/4”
Material: matte cast iron
Weight: 19.1

$161.03
 

==> All Charbroil Cooking Grids.
 





463244819 Heat Plates

CLA-TS0016-X3
Click for photos
SET OF THREE/3 PACK Stainless steel Flame Tamer for Charbroil model 463244819. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6

$95.58
 

CLA-TS0016
Click for photos
Stainless steel Flame Tamer for Charbroil model 463244819. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3

$37.51
 

VCHP1
Click for photos
Stainless steel heat plate for Charbroil model 463244819. Some OEM originals were porcelain coated steel. This stainless version, which resists rust and corrosion better, is far superior to original porcelain part.

Part Number: VCHP1
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 0.7

$37.51
 

==> All Charbroil Heat Plates.
 





463244819 Igniter Components

TS-IG2006
Click for photos
Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG2006
Weight: 0.2

$19.40
 

04450
Click for photos
Ignition electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04450
Dimensions: 3 5/16” x 0 7/8”
Weight: 0.1

$10.38
 

IGEIB2-B
Click for photos
Battery powered push button igniter.
  • Has two (2) spade type male connectors.
  • Uses 1 AAA battery (not supplied)
  • Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IGEIB2-B
Weight: 0.3

$34.11
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 

==> All Charbroil Igniter Components.
 





463244819 Rotisserie components

RO-6
Click for photos
Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

$85.09
 

==> All Charbroil Rotisserie components.
 





463244819 Heat indicators and Meat Thermometers

00018
Click for photos
Round heat indicator.
  • Single probe
  • 1 13/16” diameter
  • Requires 3/8” mounting hole


Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1

$18.21
 

==> All Charbroil Heat indicators and Meat Thermometers.
 





463244819 Accessories

BP-6
Click for photos
Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

$9.75
 

ITF-2
Click for photos
Extra long stainless steel fork with ergonomically correct handles. 20 1/2” long.

Part Number: ITF-2
Dimensions: 20 1/2
Material: stainless steel
Weight: 0.3

$13.80
 

41338
Click for photos
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60
 

14950
Click for photos
Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41
 

SDDPS
Click for photos
Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30

$18.07
 

==> All 463244819 Accessories.
 



BBQ Part Categories























 
 

Charbroil model 463244819 - Tuesday, May 12 2026

Return to Charbroil grill parts main page



More Charbroil grill models we have parts for
4639076 | 4639091 | 4639094 | 4639111 | 4639119 | 4639121 | 4639122 | 4639123 | 4639171 | 4639218 | 4639271 | 4639284 | 463928403 | 463936503 | 463937503 | 463938003 | 463938403 | 463940104 | 463941404 | 4639810 | 4639812 | 4639813 | 4639873 | 4639874 | 4639876 | 4639881 | 4639884 | 4639885 | 4639910 | 4639966 | 4639990 | 464220008 | 464220110 | 464220111 | 464220511 | 464222009 | 464222209 | 464222409 | 464222609 | 464222809 | 464223010 | 464223210 | 464223410 | 464223610 | 464224010 | 464224011 | 464224211 | 464224212 | 464224411 | 464232004 | Complete list of Charbroil grill models...



*Orders for Charbroil Performance grill model 463244819 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026