Charbroil Commercial 463241013 Grill Parts

Stainless steel burner for Charbroil model 463241013.

Part Number: 14741 (Replaces Charbroil G356-2200-W1)
Dimensions: 15 15/16” x 1”
Material: stainless steel
Weight: 0.5

Cast iron cooking grids for Charbroil model 463241013. SET OF TWO (2) panels.

• Porcelain treated, matte finish
• Each panel measures 18 1/4” x 8 1/4”
• Overall dimensions: 18 1/4” x 16 1/2”

Part Number: CG-111PCI-X2 (Replaces Charbroil G526-0007-W1)
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 1/4”
Material: cast iron
Weight: 13.0

Infrared Cooking Grate Emitter for Charbroil model 463241013. This replaces the Charbroil infrared emitter tray which, when paired with our CG-111PCI Cast Iron Cooking Grate, radiates and transmits heat to grill food without exposure to flame. If the part is heavily rusted or damaged it needs to be replaced.

CG-111SS stainless steel emitter is sold individually—more than one may be required for your grill. This emitter tray is designed to be paired with CG-111P-CI cast iron cooking grate—which is sold separately.

See part CG-111SET for an emitter and grate sold as a set of two.
This part is currently out of stock, but more are already on the way and expected to arrive early Apr

Part Number: CG-111SS (Replaces Charbroil G526-2200-W1)
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 7/8”
Material: stainless steel
Weight: 1.75

Infrared Emitter and Cast Iron Cooking Grate set for Charbroil model 463241013. This set of two pieces replaces the Charbroil infrared emitter tray (IR housing) AND the cast iron cooking grate.

Includes:

• One (1) CG-111SS stainless steel Emitter Tray
• One (1) CG-111PCI cast iron cooking grate 18 1/4” x 8 1/4”.

CG-111PCI grid rests on top of emitter tray CG-111SS. Multiple sets required, number varies by grill model.

Part Number: CG-111SET
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 8 7/8”
Material: stainless steel
Weight: 8.25

Heat Plate/ Flame Tamer not known for Charbroil model 463241013. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has two (2) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03322 (Replaces Charbroil G350-0017-W1)
Dimensions: 2 5/8” x 2”
Weight: 0.5

Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.
This part is currently out of stock, but more are already on the way and expected to arrive early Apr

Part Number: 01472 (Replaces Charbroil G350-0064-W1)
Material: ceramic
Weight: 0.1

Semi-circular, snap in heat indicator with 3 3/4” heat prob.

Part Number: 00472 (Replaces Charbroil G527-0012-W1)
Dimensions: 1 3/4” x 1 1/4”
Material: stainless steel
Weight: 0.01

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.


Part Number: SSST
Material: stainless steel
Weight: 1.5

5-piece unique tennis oriented utensil set. Constructed of heavy stainless steel with ”tennis grips” on each utensil. Includes yellow tennis ball style salt & pepper shakers, along with spatula, fork and tong.

Makes a nice gift.for tennis-minded folks

Part Number: US10
Weight: 5.00

GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.

Part Number: 76745
Material: stainless
Weight: .2

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

• Works with both charcoal and gas grills.
• Easy to use and refill.
• Long lasting cast iron.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: CLWR
Material: stainless steel
Weight: 1.0

Cannon Grill Towel.

Part Number: CGT
Dimensions: 16” x 25”
Weight: 0.30