Every Igniter Component we have - 1

Electrode and wire. Includes mounting bolt and nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).
This part is currently out of stock, but new inventory is on the way. Expected ship date is mid December

Part Number: 00162
Material: ceramic
Weight: 0.1

Fits brands: BBQ-Pro, Duro, Kenmore, Nexgrill, PermaSteel

Electrode and wire. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

Part Number: 00163
Dimensions: 3 1/4” x 1 1/4”
Material: ceramic
Weight: 0.1

Fits brands: BBQ-Pro, Kenmore, Master Forge

Electrode assembly. Includes electrode with wire, collector box, and mounting bolt with nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

Part Number: 00653
Material: ceramic
Weight: 0.1

Fits brands: Charbroil, Costco, Front Avenue, Thermos

Replacement rotisserie electrode with wire, mounting bracket, and ceramic insulator for use with Ducane models with rear rotisserie. Wire connects to spark generator with female round connector. For more information, see our Help Center article: Ignition 101.

Part Number: 01134
Material: ceramic
Weight: 0.1

Fits brands: Ducane

Replacement electrode.

• Ceramic insulator
• 25” wire with female spade connector
• Locking nuts.

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01190
Material: ceramic
Weight: 0.2

Fits brands: Grillmaster, Kenmore, Nexgrill

Electrode, gas collector box, and wire. The connecting wire has a flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

NOTE: This electrode is also sometimes used with push-button or rotary piezo ignitors, such as our part# 03100 and 03120, which have round connectors. When connecting 01472 electrode to ignitors with round connectors, use short wire part# 03199C to convert the electrode wire from a femal spade connector to a female round connector.

Part Number: 01472
Material: ceramic
Weight: 0.1

Fits brands: Charbroil, Coleman, Kenmore, Master Chef, Thermos

Electrode with a 23 1/2” wire and has a male connector with a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02390
Material: ceramic
Weight: 0.1

Fits brands: Brinkmann

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02415
Material: ceramic
Weight: 0.1

Fits brands: Brinkmann

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02615
Dimensions: 4 3/4
Material: stainless steel
Weight: 0.3

Fits brands: Kenmore

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02616
Dimensions: 3 5/8” x 4 5/16”
Material: stainless steel
Weight: 0.3

Fits brands: Kenmore

Igniter collector box, ceramic electrode with male spade connector For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02617
Dimensions: 5 1/2
Material: stainless steel
Weight: 0.3

Fits brands: Kenmore

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02619
Dimensions: 5
Material: stainless steel
Weight: 0.3

Fits brands: Aussie, The Source

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02622
Dimensions: 3 1/4” x 1 1/2”
Material: ceramic
Weight: 0.1

Fits brands: Grand Hall

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02633
Dimensions: 3 15/16” x 1 5/8”
Material: ceramic
Weight: 0.10

Fits brands: Kenmore

Electrode, collector box with connector wire that has a female spade end For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03080
Material: ceramic
Weight: 0.05

Fits brands: BBQ-Pro, Charbroil, Kenmore, Master Chef, Thermos

Electrode assembly. Includes:

• Ceramic electrode
• Gas collector box
• 40” connector wire with female spade connector
• Mounting nuts and bolts

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03118
Material: ceramic
Weight: 0.2

Fits brands: Kenmore, Master Forge

push-button for spark generator 03321

Part Number: 03140
Dimensions: 1 1/4” x 1 1/4”
Weight: 0.05

Fits brands: Weber

Trigger switch for spark generators that accept wired remote switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387and 03388.
Includes:

• Push-button trigger switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

Fits brands: Big Horn, Blooma, Charbroil, Coleman, Costco, Duro, Grand Hall, Home Depot, Jenn-Air, Kenmore, Kitchen Aid, Master Cook, Master Forge, Member's Mark, Nexgrill, Outdoor Gourmet, Perfect Flame, Sams, Thermos, Weber

round trigger switch for AA and AAA spark generators; use original wires

Part Number: 03153
Dimensions: 17 3/4” x 1”
Weight: 0.1

Fits brands: Blooma, Coleman

Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo.

Part Number: 03197
Weight: 0.05

Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

• Can change male round to male spade
• Can change female spade to female round

ALL

Part Number: 03198
Weight: 0.05

Electrode replacement kit for Fire Magic grills. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199
Material: ceramic
Weight: 0.5

Fits brands: Fire Magic

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

Part Number: 03199C
Weight: 0.05

Battery powered push button spark generator with single round connector.

• Installs behind the control panel, replacing a piezo plunger.
• Fits most grills that use a push-button piezo plunger.
• Uses a single AA battery (not included).
• Requires 3/4” mounting hole

Part Number: 03300
Dimensions: 2 7/8” x 2 1/16”
Weight: 0.3

Fits brands: PGS

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has two (2) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03322
Dimensions: 2 5/8” x 2”
Weight: 0.5

Fits brands: Charbroil, Coleman, Kenmore, Kitchen Aid, Nexgrill, Thermos, Weber

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has three (3) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03332
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.3

Fits brands: Blooma, Coleman, Kenmore, Master Forge, Weber

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal battery powered push button ignitor.

• 1.5 volt
• Has three (5) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3

Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

Part Number: 03342
Weight: 0.3

Fits brands: Brinkmann, Broil-Mate, Broilmaster, Charbroil, Kenmore, Member's Mark, North American Outdoors, Thermos

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has four(4) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03344
Dimensions: 2” x 2 1/2”
Weight: 0.5

Fits brands: Charbroil, Coleman, Home Depot, Kenmore, Kitchen Aid, Thermos

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.Note: Some original ignitors (spark generators) that 03352 replaces had an integrated ground wire that is not present on this part (03352). If the ignitor you are replacing has an integrated ground wire, you will also need our ground wire part# 03621.

• 1.5 volt
• Has five (5) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

Fits brands: Charbroil, Coleman, Costco, Duro, Grand Hall, Home Depot, Jenn-Air, Kenmore, Kitchen Aid, Master Forge, Member's Mark, Nexgrill, Perfect Flame, Sams

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has six (6) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03356
Dimensions: 3 3/8” x 2”
Weight: 0.7

Fits brands: Big Horn, Charbroil, Costco, Kenmore, Kitchen Aid, Master Cook, Master Forge, Nexgrill, Outdoor Gourmet

4-outlet AA spark generator.

Part Number: 03371
Weight: 0.5

Fits brands: Viking

2-outlet AA spark generator

Part Number: 03372
Weight: 0.5

Fits brands: Alfresco, Coleman

Battery powered, 7-outlets push button ignitor. Uses AA battery and requires a 7/8” mounting hole.

Part Number: 03377
Weight: 0.5

Fits brands: Brinkmann, Nexgrill

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has seven (7) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03387
Dimensions: 3 3/8” x 2”
Weight: 0.5

Fits brands: Costco, Kenmore, Kitchen Aid

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has eight (8) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03388
Dimensions: 3 1/2” x 2”
Weight: 0.5

Fits brands: Kitchen Aid, Nexgrill, Sams

20” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

Part Number: 03400
Weight: 0.1

Fits brands: Charbroil

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350.

Part Number: 03620
Weight: 0.1

Fits brands: Altima, Amana, American Select, Arkla, Aussie, Backyard Grill, Bakers & Chefs, Barbeques Galore, BBQ-Pro, BBQTEK, Beaumark, Blooma, Blue Ember, Blue Rhino, Brinkmann, Broil-Mate, Broil Chef, Browning, Bull Outdoor, Capt'n Cook, Cascade, Char-Griller, Charbroil, Charmglow, Coleman, Cook-On, Costco, DCS, Ducane, Duro, Dyna-Glo, Fiesta, Flavor Master, Front Avenue, Golden Grill, Grand Cafe, Grand Gourmet, Grand Hall, Great Outdoors, Grill Chef, Grillmaster, Grill Mate, Grill Zone, GrillPro, Grillrite, Heartland Outdoors, Home Depot, Huntington, Igloo, Jenn-Air, Kenmore, Kitchen Aid, Life@Home, Master Chef, Master Forge, Medallion, Member's Mark, MHP, Nexgrill, North American Outdoors, Omaha, Outdoor Gourmet, Patio Chef, Patio Master, Patio Range, Perfect Flame, Perfect Glo, PermaSteel, PGS, Phoenix, President's Choice, Range Master, River Grille, S.R. Potten, Sams, Sear Flame, Shinerich, Smoke Canyon, Smoke Hollow, Sonoma, Sterling Forge, Sunbeam, Surefire, The Source, Thermos, Turbo, Tuscany, Uniflame, Vermont Castings, Weber

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

Fits brands: Charbroil, Duro, Grand Hall, Kenmore, Kitchen Aid, Master Forge, Member's Mark, Nexgrill, Perfect Flame, Sams

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Fits brands: Costco, Ducane, Jenn-Air, Nexgrill, Sams

Collector box and ceramic electrode with male spade connector. Mounts perpendicular through casting with threaded rod and locking nuts. Includes igniter ground lug, no wire For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03800
Material: ceramic
Weight: 0.2

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03821
Material: ceramic
Weight: 0.1

Fits brands: Brinkmann, Home Depot

Ceramic electrode with male spade connector For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04100
Material: ceramic
Weight: 0.1

Fits brands: Charmglow

Collector box and ceramic electrode with male spade connector for models with 12112 or 11512 burners. Attaches directly to burner For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04420
Material: ceramic
Weight: 0.1

Fits brands: Charbroil

Ceramic electrode and 39” wire with female spade connector For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04423
Material: ceramic
Weight: 0.2

Fits brands: Coleman, Kenmore, Master Forge

Burner mounted electrode for use with 15591 and 15491 burners.

• 11.5” wire with female spade connector
• Includes adapter wire part 03198 for applications needing male spade connector on electrode.

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430
Material: ceramic
Weight: 0.1

Fits brands: Aussie, Charbroil, Costco, Front Avenue, Heartland Outdoors, Kenmore, Kitchen Aid, Master Chef, Master Forge, Nexgrill, Outdoor Gourmet, Range Master, Thermos

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.
This part is currently out of stock, but new inventory is on the way. Expected ship date is mid December

Part Number: 04431
Dimensions: 4 3/4” x 4 1/2”
Material: ceramic
Weight: 0.1

Fits brands: Backyard Grill, Dyna-Glo, Kenmore, Master Forge, Sams

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

Fits brands: Charbroil, Grillmaster, Kenmore, Kitchen Aid, Member's Mark, Nexgrill, Sams, Thermos