Dyna-Glo Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

Part Number: UP-8B
Weight: 0.3

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

Part Number: UP-7B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

Part Number: TS-IG4010
Weight: 0.2

TS-IG4010 fits this one Dyna-Glo model:
DGE486BNP-D

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

Part Number: TS-IG2006
Weight: 0.2

TS-IG2006 fits these 7 Dyna-Glo models:
DGB390BNP-D DGB390BNP	DGB390SNP-D DGB730SNB-D	DGB730SNB M365GMDG14-D	M365GMDG14

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 2 Dyna-Glo models:
DGF510SSP-D	DGF510SSP

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

Part Number: IGEIB4-B
Weight: 0.3

IGEIB4-B fits this one Dyna-Glo model:
DGE486BNP-D

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

Part Number: IGEIB2-B
Weight: 0.3

IGEIB2-B fits these 7 Dyna-Glo models:
DGB390BNP-D DGB390BNP	DGB390SNP-D DGB730SNB-D	DGB730SNB M365GMDG14-D	M365GMDG14

Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25

46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 10 Dyna-Glo models:
DGB390BNP-D DGB390BNP	DGB390SNP-D DGB730SNB-D	DGB730SNB DGE486BNP-D	DGF510SSP-D DGF510SSP	M365GMDG14-D M365GMDG14

Burner-mounted ceramic igniter electrode with mounting bracket and hardware For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

IG-20B fits these 3 Dyna-Glo models:
DGF510SBP	DGF510SSP-D	DGF510SSP

20” igniter wire with two (2) female spade connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-18B fits this one Dyna-Glo model:
DCP480CSP

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

Part Number: IG-15B
Weight: 0.3

Ignition electrode - main burner. Ceramic electrode with wire. Replaces Dyna-Glo part# 104-13012 (electrode) and 113-03017 (wire).

Part Number: 104-13012-R
Dimensions: 4 3/4” x 4 1/2”
Material: ceramic
Weight: 0.1

104-13012-R fits these 7 Dyna-Glo models:
DGA480BSP-D DGA480BSP	DGA480SSP-D DGA480SSP	DGB390BNP-D DGB390BNP	DGB390SNP-D

Burner mounted electrode. Mounts to flange on underside of burner.

• Ceramic insulator
• Mounting bracket with nut and bolt
• 8” wire with female spade connector

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04820
Material: ceramic
Weight: 0.1

04820 fits these 3 Dyna-Glo models:
DCP480CSP	DGP350NP-D	DGP350NP

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.
This part is currently out of stock, but new inventory is on the way. Expected ship date is early December

Part Number: 04431
Dimensions: 4 3/4” x 4 1/2”
Material: ceramic
Weight: 0.1

04431 fits these 13 Dyna-Glo models:
DGB730SNB-D DGB730SNB DGE486BNP-D	DGE486BNP DGF486GSP M365GMDG14-D	M365GMDG14 M486BBDG14-D M486BBDG14	M486GMDG14-D M486GMDG14 M486RDDG14-D	M486RDDG14

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

03620 fits these 10 Dyna-Glo models:
DGB390BNP-D DGB390BNP	DGB390SNP-D DGB730SNB-D	DGB730SNB DGE486BNP-D	DGF510SSP-D DGF510SSP	M365GMDG14-D M365GMDG14

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

03380 fits these 14 Dyna-Glo models:
DGA480BSP-D DGA480BSP DGA480SSP-D	DGA480SSP DGE486BNP DGF486GRP	DGF486GSP DGF487GRP M486BBDG14-D	M486BBDG14 M486GMDG14-D M486GMDG14	M486RDDG14-D M486RDDG14

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

• Can change male round to male spade
• Can change female spade to female round

ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05