Perfect Flame Igniter Components
Universal 3 outlet rotary spark generator. Includes knob.
Part Number: UP-8B
Weight: 0.3
Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.
Part Number: UP-7B
Weight: 0.3
Universal two outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-6B
Weight: 0.3
Universal one outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-5B
Weight: 0.12
Universal push-button igniter. Round male connector. Includes locking nut.
Part Number: UP-4B Weight: 0.3
UP-4B fits this one Perfect Flame model: |
| | | | |
Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
Part Number: TS-IG4010
Weight: 0.2
Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).
Part Number: TS-IG2006 Weight: 0.2
TS-IG2006 fits these 4 Perfect Flame models: |
| | | | |
Battery powered push button igniter.
- Has six (6) spade type male connectors.
- Uses 1 AA battery (not supplied)
- Requires 7/8” mounting hole.
Part Number: IGEIB6-B Weight: 0.3
IGEIB6-B fits these 5 Perfect Flame models: |
| | | | |
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
Part Number: IGEIB4-B Weight: 0.3
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
Part Number: IGEIB2-B Weight: 0.3
IGEIB2-B fits these 4 Perfect Flame models: |
| | | | |
Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25
46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B Dimensions: 46
Weight: 0.1
IG-30B fits these 10 Perfect Flame models: |
| | | | |
Burner-mounted ceramic igniter electrode with mounting bracket and hardware For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-20B Weight: 0.05
IG-20B fits these 17 Perfect Flame models: |
| | | | |
Burner-mounted ceramic electrode, wire, and mounting bracket.
Part Number: IG-19B Weight: 0.1
IG-19B fits these 5 Perfect Flame models: |
| | | | |
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
Part Number: IG-15B
Weight: 0.3
Electronic ignitor. Sometimes comes with black or sliver cap.
- 3 spark outlets (male spade connectors)
- Uses 1 AAA battery (not included)
- Requires 3/4” mounting hole
Part Number: 286964-201 Weight: 0.5
286964-201 fits these 2 Perfect Flame models: |
| | | | |
front collector box, top & bottom combo. Includes top 22215-014 and bottom 22225-014. This part has been redesigned by the manufacturer and is now a little shorter but still fully functional in the original grills.
Part Number: 22225-014A Dimensions: 21 5/8
Material: stainless steel
Weight: 1.2
22225-014A fits these 2 Perfect Flame models: |
| | | | |
collector box, top front. This part has been redesigned by the manufacturer and is now a little shorter but still fully functional in the original grills. Also, this part is included in a combo of the upper & lower collector boxes as part number 22225-014A; we no longer have just the lower collector box 22225-014 in stock.
Part Number: 22215-014 Dimensions: 21 5/8
Material: stainless steel
Weight: 0.6
22215-014 fits these 2 Perfect Flame models: |
| | | | |
rear collector box.
Part Number: 22205-024 Material: stainless steel
Weight: 0.9
22205-024 fits these 2 Perfect Flame models: |
| | | | |
electrode and wire for side burner.
Part Number: 10342-T10 Weight: 0.3
10342-T10 fits these 2 Perfect Flame models: |
| | | | |
electrode with 11 3/4” connector wire that has a flat/spade female end; use with AA or AAA battery powered ignitors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E12 Weight: 0.1
10342-E12 fits these 2 Perfect Flame models: |
| | | | |
Ceramic electrode and 40” wire with female spade connector For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 06730 Material: ceramic
Weight: 0.1
06730 fits this one Perfect Flame model: |
| | | | |
Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03621 Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1
03621 fits this one Perfect Flame model: |
| | | | |
14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620 Weight: 0.1
03620 fits these 10 Perfect Flame models: |
| | | | |
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380 Dimensions: 3 5/16” x 2”
Weight: 0.7
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
Note: Some original ignitors (spark generators) that 03352 replaces had an integrated ground wire that is not present on this part (03352). If the ignitor you are replacing has an integrated ground wire, you will also need our ground wire part#
03621.
- 1.5 volt
- Has five (5) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03352 Dimensions: 3 3/8” x 2”
Weight: 0.7
03352 fits this one Perfect Flame model: |
| | | | |
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
Part Number: 03333 Dimensions: 2 9/16” x 2”
Weight: 0.5
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C Weight: 0.05
03199C fits this one Perfect Flame model: |
| | | | |
Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198 Weight: 0.05
Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05
Trigger switch for spark generators that accept wired remote switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387and 03388.
Includes:
- Push-button trigger switch with two male spade connectors on back
- Two 20” wires with female spade connectors
- One plastic mounting nut
Part Number: 03152 Dimensions: 17 3/4” x 1”
Weight: 0.1
03152 fits this one Perfect Flame model: |
| | | | |