Member's Mark Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

Part Number: UP-8B
Weight: 0.3

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

Part Number: UP-7B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

Part Number: TS-IG4010
Weight: 0.2

TS-IG4010 fits these 25 Member's Mark models:
GR2039201-MM-00 M3905ALP M3905ANG M5205ALP M5205ANG	MEV05ALP MEV06ALP MONARCH04ALP MONARCH04ANG MONARCH04BNG	REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC Y0202XC-LP	Y0202XC-NG Y0202XC Y0660-1 Y0660 Y0660LP-2	Y0660LP Y0660NG-1 Y0660NG-2 Y0660NG Y0669NG

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

Part Number: TS-IG2006
Weight: 0.2

TS-IG2006 fits these 8 Member's Mark models:
B10PG20-2C B10PG20-2R	M3905ALP M3905ANG	Y0660 Y0660LP-2	Y0660NG-2 Y0660NG

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 7 Member's Mark models:
720-0691A 720-0882D	730-0691A B09SMG1-3F	M3206ALP M3206ANG	MG3208SLP

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

Part Number: IGEIB4-B
Weight: 0.3

IGEIB4-B fits these 25 Member's Mark models:
GR2039201-MM-00 M3905ALP M3905ANG M5205ALP M5205ANG	MEV05ALP MEV06ALP MONARCH04ALP MONARCH04ANG MONARCH04BNG	REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC Y0202XC-LP	Y0202XC-NG Y0202XC Y0660-1 Y0660 Y0660LP-2	Y0660LP Y0660NG-1 Y0660NG-2 Y0660NG Y0669NG

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

Part Number: IGEIB2-B
Weight: 0.3

IGEIB2-B fits these 8 Member's Mark models:
B10PG20-2C B10PG20-2R	M3905ALP M3905ANG	Y0660 Y0660LP-2	Y0660NG-2 Y0660NG

20” igniter wire with female spade and round connector For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-7B fits these 21 Member's Mark models:
M3206ALP M3206ANG M3207ALP M3207ANG M3905ALP	M3905ANG MEV05ALP MEV06ALP MG3208SLP MONARCH04ALP	MONARCH04ANG MONARCH04BNG REGAL04ALP REGAL04ANG Y0005XC-2	Y0101XC Y0202XC-LP Y0202XC-NG Y0202XC Y0660-1	Y0669NG

Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25

Ceramic electrode and gas collector box.

Part Number: IG-34B
Weight: .05

IG-34B fits these 7 Member's Mark models:
GR2039201-MM-00 Y0660	Y0660LP-2 Y0660LP	Y0660NG-1 Y0660NG-2	Y0660NG

Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc… For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-31B
Weight: .05

IG-31B fits these 11 Member's Mark models:
B08SMG-1 B08SMG-2 B09SMG-3	B09SMG1-3F B10PG20-2C B10PG20-2R	BQ06043-1-N BQ06043-1 GR2001402-MM-00	GR2001408-MM-00 GR3055-014571

46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 42 Member's Mark models:
720-0691A 720-0882D 730-0691A B08SMG-1 B08SMG-2 B09SMG-3 B09SMG1-3F	B10PG20-2C B10PG20-2R BQ06043-1-N BQ06043-1 GR2001402-MM-00 GR2001408-MM-00 GR2039201-MM-00	GR3055-014571 M3206ALP M3206ANG M3905ALP M3905ANG M5205ALP M5205ANG	MEV05ALP MEV06ALP MG3208SLP MONARCH04ALP MONARCH04ANG MONARCH04BNG REGAL04ALP	REGAL04ANG Y0005XC-2 Y0101XC Y0202XC-LP Y0202XC-NG Y0202XC 8 more models...

Collector box with ceramic electrode and wire.

Part Number: IG-22B
Weight: 0.3

IG-22B fits this one Member's Mark model:
GR3055-14684

Burner-mounted ceramic igniter electrode with mounting bracket and hardware For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

IG-20B fits these 5 Member's Mark models:
M3206ALP	M3206ANG	M3207ALP	M3207ANG	MG3208SLP

Burner-mounted ceramic electrode, wire, and mounting bracket.

Part Number: IG-19B
Weight: 0.1

IG-19B fits these 10 Member's Mark models:
720-0582 720-0582B	720-0584 720-0584A	720-0691A 720-0778A	720-0778C 730-0582	730-0584 730-0691A

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

Part Number: IG-17B
Weight: 0.11

IG-17B fits these 21 Member's Mark models:
M3206ALP M3206ANG M3207ALP M3207ANG M3905ALP	M3905ANG MEV05ALP MEV06ALP MG3208SLP MONARCH04ALP	MONARCH04ANG MONARCH04BNG REGAL04ALP REGAL04ANG Y0005XC-2	Y0101XC Y0202XC-LP Y0202XC-NG Y0202XC Y0660-1	Y0669NG

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

Part Number: IG-15B
Weight: 0.3

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 09571
Dimensions: 4 3/8” x 1”
Material: ceramic
Weight: 0.1

09571 fits this one Member's Mark model:
GR2071001-MM-00

Ignition electrode For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04434
Dimensions: 4 3/16” x 1 1/16”
Weight: 0.1

04434 fits this one Member's Mark model:
720-0882D

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

04432 fits this one Member's Mark model:
720-0778C

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

03621 fits these 3 Member's Mark models:
720-0778C	M3207ALP	M3207ANG

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

03620 fits these 34 Member's Mark models:
720-0691A 720-0882D 730-0691A B09SMG1-3F B10PG20-2C B10PG20-2R GR2039201-MM-00	M3206ALP M3206ANG M3905ALP M3905ANG M5205ALP M5205ANG MEV05ALP	MEV06ALP MG3208SLP MONARCH04ALP MONARCH04ANG MONARCH04BNG REGAL04ALP REGAL04ANG	Y0005XC-2 Y0101XC Y0202XC-LP Y0202XC-NG Y0202XC Y0660-1 Y0660	Y0660LP-2 Y0660LP Y0660NG-1 Y0660NG-2 Y0660NG Y0669NG

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

03380 fits this one Member's Mark model:
720-0830G

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.Note: Some original ignitors (spark generators) that 03352 replaces had an integrated ground wire that is not present on this part (03352). If the ignitor you are replacing has an integrated ground wire, you will also need our ground wire part# 03621.

• 1.5 volt
• Has five (5) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

03352 fits these 6 Member's Mark models:
720-0584 720-0584A	720-0778A 720-0778C	M3207ALP M3207ANG

Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

03342 fits these 3 Member's Mark models:
GR2001402-MM-00	GR2001408-MM-00	GR3055-014571

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

• Can change male round to male spade
• Can change female spade to female round

ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Trigger switch for spark generators that accept wired remote switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387and 03388.
Includes:

• Push-button trigger switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

03152 fits these 6 Member's Mark models:
720-0584 720-0584A	720-0778A 720-0778C	M3207ALP M3207ANG