Member's Mark B09SMG1-3F Grill Parts

Stainless steel tube burners for Member's Mark model B09SMG1-3F. SET OF THREE (3).

Includes:

• SS tube burner
• Electrode mounting bracket
• Spider exclusion screen
• Adjustable air shutter.

Part Number: 16231-X3
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 0.15

Stainless steel burner for Member's Mark model B09SMG1-3F.

Part Number: SCTB1
Dimensions: 15 3/8
Material: stainless steel
Weight: 0.43

Stainless steel burner for Member's Mark model B09SMG1-3F.

Part Number: SCTB2
Dimensions: 15 1/2” x 4 3/4”
Material: stainless steel
Weight: 1.0

Stainless steel cooking grids (set of 3) for Member's Mark model B09SMG1-3F.

Part Number: 5S463
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 30 3/4”
Material: stainless steel tubes
Weight: 9.0

Cast iron cooking grids for Member's Mark model B09SMG1-3F. SET OF THREE (3) panels.

• Porcelain treated, matte finish
• Each panel measures 18 3/4” x 9 1/2”
• Overall dimensions: 18 3/4 x 28 1/2”

Part Number: CG-72P-CI-X3
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 28 1/2”
Material: cast iron
Weight: 19.35

Cast iron cooking grid for Member's Mark model B09SMG1-3F. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-70P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 8.2

Cast iron cooking grid for Member's Mark model B09SMG1-3F. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

SET OF THREE/3 PACK Stainless steel heat diffuser for Member's Mark model B09SMG1-3F. On some grill models it is also known as a Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

Stainless steel heat diffusers for Member's Mark model B09SMG1-3F. SET OF THREE (3). On some grill models it is also known as a Flame Tamer.

Part Number: 96421-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4 5/8”
Material: stainless steel
Weight: 2.55

Stainless steel heat diffuser for Member's Mark model B09SMG1-3F. On some grill models it is also known as a Flame Tamer.

Part Number: 96421
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4 5/8”
Material: stainless steel
Weight: 0.85

Stainless steel heat plate for Member's Mark model B09SMG1-3F.

Part Number: SCHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/8”
Material: stainless steel
Weight: 1.3

Burner mounted electrodes with male spade connectors. SET OF THREE (3). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 04022-X3
Material: ceramic
Weight: 0.3

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc….

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-31B
Weight: .05

Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

This part is currently out of stock, but more are already on the way and expected to arrive early July

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14