Grill-Parts home

Member's Mark 720-0830F Grill Parts

Member's Mark logo

 

 

Highest quality replacement parts for your Member's Mark 720-0830F - Free USA shipping $49 or more* - No Sales Tax*

 

Member's Mark 720-0830F owners manual and diagrams
Diagrams & owners manual not available for grill model# 720-0830F. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for the Member's Mark model: 720-0830F
This page shows all of the parts we know fit model Member's Mark 720-0830F. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Member's Mark grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Member's Mark 720-0830F BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Member's Mark model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


720-0830F Burners

10381
Click for photos
Stainless steel tube burner for Member's Mark model 720-0830F.

Part Number: 10381
Dimensions: 15” x 1”
Material: stainless steel
Weight: 0.5

$33.81
 

==> All Member's Mark Burners.
 





720-0830F Cooking Grids

5S732
Click for photos
Stainless steel cooking grid for Member's Mark model 720-0830F. Sold as a set of two (2).

Part Number: 5S732
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 26 3/8”
Material: stainless steel clad wire
Weight: 10.3

$126.11
 

61192
Click for photos
Cast iron cooking grids for Member's Mark model 720-0830F. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 61192
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10

$96.78
 

==> All Member's Mark Cooking Grids.
 





720-0830F Heat Plates

CLA-TS0157-X3
Click for photos
SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for Member's Mark model 720-0830F. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

$64.95
 

CLA-TS0157-X4
Click for photos
SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for Member's Mark model 720-0830F. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

$83.12
 

97371-X6
Click for photos
Porcelain steel Flame Tamers for Member's Mark model 720-0830F. SET OF SIX.

Part Number: 97371-X6
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

$112.98
 

GMNGHP1
Click for photos
Grillmaster Heat Plate for Member's Mark model 720-0830F.

Part Number: GMNGHP1
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.81

$23.89
 

==> All Member's Mark Heat Plates.
 





720-0830F Igniter Components

03380
Click for photos
Universal battery powered push button ignitor.
  • 1.5 volt
  • Has five (5) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

$44.93
 

04433
Click for photos
Electrode with approximately 25” wire; female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04433
Weight: 0.2

$10.35
 

==> All Member's Mark Igniter Components.
 





720-0830F Heat indicators and Meat Thermometers

22551
Click for photos
Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

$14.85
 

==> All Member's Mark Heat indicators and Meat Thermometers.
 





720-0830F Accessories

00281
Click for photos
Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

$12.67
 

44070
Click for photos
Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.



Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16
 

24785
Click for photos
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

$22.60
 

00150
Click for photos

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

  • Works with both charcoal and gas grills.
  • Easy to use and refill.
  • Long lasting cast iron.


Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

$27.70
 

41551
Click for photos
Non-Stick Wing Rack.

A convenient non-stick coated wire wing rack with folding legs, the best way to roast chicken legs and wings on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.



Part Number: 41551
Weight: 0.5

$12.09
 

SDDPS
Click for photos
Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30

$18.07
 

==> All 720-0830F Accessories.
 



BBQ Part Categories
























 
 

Member's Mark grill model 720-0830F - Tuesday, May 12 2026

Return to Member's Mark grills main page



More Member's Mark grill models we have parts for
GR2234802-MM-00 | GR2297802-MM-00 | GR2298901-MM-00 | GR3055-014571 | GR3055-14684 | M2505ANG | M3206ALP | M3206ANG | M3207ALP | M3207ANG | M3905ALP | M3905ANG | M5205ALP | M5205ANG | MEV05ALP | MEV06ALP | MG3208SLP | MM-G2001-AB | MONARCH04ALP | MONARCH04ANG | MONARCH04BNG | PG-4030400LG | PG-40606SOLA | REGAL04ALP | REGAL04ANG | Y0005XC-2 | Y0101XC | Y0202XC | Y0202XC-LP | Y0202XC-NG | Y0660 | Y0660-1 | Y0660LP | Y0660LP-2 | Y0660NG | Y0660NG-1 | Y0660NG-2 | Y0669NG | 608SB | 720-0582 | 720-0582B | 720-0584 | 720-0584A | 720-0586 | 720-0586A | 720-0691A | 720-0709B | 720-0778A | 720-0778C | Complete list of Member's Mark grill models...



*Orders for Member's Mark grill model 720-0830F $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026