Member's Mark GR2234802-MM-00 Grill Parts

stainless steel burner for Member's Mark model GR2234802-MM-00.

Part Number: 122L1
Dimensions: 17 3/8” x 5”
Material: stainless steel
Weight: 1.0

stainless steel burner for Member's Mark model GR2234802-MM-00.

Part Number: 122R1
Dimensions: 17 3/8” x 5”
Material: stainless steel
Weight: 1.0

Cast iron cooking grids for Member's Mark model GR2234802-MM-00. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 61752
Dimension Front-to-Back: 19 1/16”
Dimension Side-to-Side: 18 5/8”
Material: gloss cast iron
Weight: 10.5

Porcelain steel Flame Tamers for Member's Mark model GR2234802-MM-00. SET OF TWO (2).

Part Number: 92291-X2
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 3.0

Porcelain steel Flame Tamer for Member's Mark model GR2234802-MM-00.

Part Number: 92291
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5

Burner mounted electrodes with male spade connector. SET OF TWO (2). Includes small mounting bolts and nuts.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 02291-X2
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.2

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2 and 3 piece multi-packs. See part 04022-X2, X3.

Part Number: 02291
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.1

Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

Round heat indicator.

• Single probe
• 3 1/8” diameter
• Requires .60” mounting hole

WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".

Part Number: 00020
Dimensions: 3 1/8” x 3 1/8”
Weight: .20

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59