Jenn-Air Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

Part Number: UP-8B
Weight: 0.3

UP-8B fits these 11 Jenn-Air models:
JBQ30FL JBQ30FN JBQ30L	JBQ30N JBQ42FL JBQ42FN	JBQ42L JBQ42N JBQ54L	JBQ54N JLG7130ADS

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

Part Number: UP-7B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

Part Number: TS-IG4010
Weight: 0.2

TS-IG4010 fits this one Jenn-Air model:
720-0061-LP

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 11 Jenn-Air models:
720-0336B 720-0336C 720-0709	720-0709B 720-0720 730-0336B	730-0336C 730-0709 730-0720	JA480 JA580

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

Part Number: IGEIB4-B
Weight: 0.3

IGEIB4-B fits this one Jenn-Air model:
720-0061-LP

Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25

46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 12 Jenn-Air models:
720-0061-LP 720-0336B 720-0336C	720-0709 720-0709B 720-0720	730-0336B 730-0336C 730-0709	730-0720 JA480 JA580

Burner-mounted ceramic igniter electrode with mounting bracket and hardware For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

IG-20B fits these 6 Jenn-Air models:
JA460 JA460P	JA461 JA461P	JA480 JA580

Burner-mounted ceramic electrode, wire, and mounting bracket.

Part Number: IG-19B
Weight: 0.1

IG-19B fits these 12 Jenn-Air models:
720-0336B 720-0336C 720-0709	720-0709B 720-0720 720-0727	730-0336B 730-0336C 730-0709	730-0720 740-0711 740-0712

20” igniter wire with two (2) female spade connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-18B fits these 5 Jenn-Air models:
JA460	JA461	JA461P	JA480	JA580

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

Part Number: IG-15B
Weight: 0.3

Battery powered push button Igniter Kit.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” mounting hole.

NOTE: Part 50000816-R is a fully functional aftermarket replacement for Vermont Castings OEM part# 50000816, which is no longer available.

Part Number: 50000816-R
Weight: 0.3

50000816-R fits these 4 Jenn-Air models:
JA460	JA460P	JA461	JA461P

Ceramic electrode and 40” wire with female spade connector For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06730
Material: ceramic
Weight: 0.1

06730 fits this one Jenn-Air model:
JA38

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter) For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03750 fits this one Jenn-Air model:
720-0709B

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

03620 fits these 16 Jenn-Air models:
720-0061-LP 720-0336B 720-0336C 720-0709	720-0709B 720-0720 730-0336B 730-0336C	730-0709 730-0720 JA460 JA460P	JA461 JA461P JA480 JA580

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.Note: Some original ignitors (spark generators) that 03352 replaces had an integrated ground wire that is not present on this part (03352). If the ignitor you are replacing has an integrated ground wire, you will also need our ground wire part# 03621.

• 1.5 volt
• Has five (5) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

03352 fits these 4 Jenn-Air models:
720-0511	720-0512	720-0709B	720-0727

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

03199C fits this one Jenn-Air model:
720-0709B

Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

• Can change male round to male spade
• Can change female spade to female round

ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Trigger switch for spark generators that accept wired remote switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387and 03388.
Includes:

• Push-button trigger switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

03152 fits these 4 Jenn-Air models:
720-0511	720-0512	720-0709B	720-0727