Vermont Castings Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

Part Number: UP-8B
Weight: 0.3

UP-8B fits these 17 Vermont Castings models:
CF9030 CF9030LP CF9030N CF9050	VC100-A VC200-A VC200-B VC200-C	VC200-D VC200-E VC400-A VC400-B	VC400-C VC400-D VC50-A VC75-A	VC75-B

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

Part Number: UP-7B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-6B
Weight: 0.3

UP-6B fits these 39 Vermont Castings models:
VC0620AP-NP VC0620P VC0680AP-NP VC0680AP VC0680N VC0680P VC400-A	VC400-B VC400-C VC400-D VC75-A VCS4005 VCS4005C VCS4006	VCS4007 VCS4017 VCS4027 VCS4037 VCS4106 VCS5005 VCS5005BI	VCS5006 VCS5006BI VCS5007 VCS5010 VCS5016 VCS5017 VCS5026	VCS5027 VCS5036 VCS5037 VM450 VM450SSP VM456 5 more models...

Universal one outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

Part Number: TS-IG4010
Weight: 0.2

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 4 Vermont Castings models:
VCS3008	VCS3018	VCS3028	VCS3038

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

Part Number: IGEIB4-B
Weight: 0.3

20” igniter wire with female spade and round connector For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-7B fits these 8 Vermont Castings models:
CF9030LP CF9030N	VC0620AP-NP VC0620P	VC0680AP-NP VC0680AP	VC0680N VC0680P

Ignitor collector box and electrode for thru casting mounts. Preassembled. Includes:

• Collector box and ceramic electrode with male spade connector
• Locking nuts and washer
• Ground lug (not shown)

Part Number: IG-4B
Weight: 0.3

IG-4B fits these 6 Vermont Castings models:
VC0620AP-NP VC0620P	VC0680AP-NP VC0680AP	VC0680N VC0680P

Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25

46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 4 Vermont Castings models:
VCS3008	VCS3018	VCS3028	VCS3038

Burner-mounted ceramic igniter electrode with mounting bracket and hardware For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

IG-20B fits these 115 Vermont Castings models:
CF9030 CF9030LP CF9030N CF9050 CF9055-3A CF9055-3B CF9055	CF9055LP CF9055N CF9056 CF9080 CF9085-3A CF9085-3B CF9085	CF9086 Experience Extreme Built-in Extreme Limited Edition Extreme Marvel Sizzler Built-in	Sizzler VC100-A VC100-B VC100-C VC200-A VC200-B VC200-C	VC200-D VC200-E VC30 VC3505 VC400-A VC400-B 81 more models...

20” igniter wire with two (2) female spade connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-18B fits these 39 Vermont Castings models:
CF9055 CF9055LP CF9055N Experience Extreme Built-in Extreme Limited Edition Extreme	Marvel Sizzler Built-in Sizzler VC0620AP-NP VC0620P VC0680AP-NP VC0680AP	VC0680N VC0680P VC3505 VCS3000 VCS3500 VCS3500BI VCS3505	VCS3505BI VCS4005 VCS4006P VCS4007P VCS500 VCS5000 VCS5000BI	VCS5005 VCS5006BI VM400XBN VM400XBP VM400XVP VM448 5 more models...

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

Part Number: IG-15B
Weight: 0.3

Battery powered push button Igniter Kit.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” mounting hole.

NOTE: Part 50000816-R is a fully functional aftermarket replacement for Vermont Castings OEM part# 50000816, which is no longer available.

Part Number: 50000816-R
Weight: 0.3

50000816-R fits these 28 Vermont Castings models:
CF9050 CF9055-3A CF9055-3B CF9055 CF9055LP CF9055N	CF9056 VC30 VCS3006 VCS3505 VCS3505BI VCS3506	VCS3507 VCS3507BI VCS3517 VCS4005 VCS4106 VCS6005	VCS6006 VM400 VM400XBN VM400XBP VM406 VM448N	VM448P VM450 VM450SSP VM456

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

03620 fits these 32 Vermont Castings models:
CF9050 CF9055-3A CF9055-3B CF9055 CF9055LP CF9055N CF9056	VC30 VCS3006 VCS3008 VCS3018 VCS3028 VCS3038 VCS3505	VCS3505BI VCS3506 VCS3507 VCS3507BI VCS3517 VCS4005 VCS4106	VCS6005 VCS6006 VM400 VM400XBN VM400XBP VM406 VM448N	VM448P VM450 VM450SSP VM456

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

• Can change male round to male spade
• Can change female spade to female round

ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05