Nexgrill Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

Part Number: UP-8B
Weight: 0.3

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

Part Number: UP-7B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut.

Part Number: UP-4B
Weight: 0.3

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

Part Number: TS-IG4010
Weight: 0.2

TS-IG4010 fits these 11 Nexgrill models:
720-0061-LP 720-0549 720-0679	720-0679B 720-0679R 720-0718	720-0718A 720-0718C 720-0718N	720-0737 720-0825

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

Part Number: TS-IG3007
Weight: 0.2

TS-IG3007 fits this one Nexgrill model:
720-0718B

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

Part Number: TS-IG2006
Weight: 0.2

TS-IG2006 fits these 3 Nexgrill models:
720-0522	720-0522CAN	730-0522

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

Part Number: IGEIB6-B
Weight: 0.3

IGEIB6-B fits these 22 Nexgrill models:
720-0336B 720-0336C 720-0649 720-0650 720-0650A 720-0670A	720-0670C 720-0670E 720-0691A 720-0709 720-0709B 720-0719BL	720-0720 720-0745 720-0773 720-0783E 730-0336B 730-0336C	730-0691A 730-0709 730-0720 730-0745

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

Part Number: IGEIB4-B
Weight: 0.3

IGEIB4-B fits these 11 Nexgrill models:
720-0061-LP 720-0549 720-0679	720-0679B 720-0679R 720-0718	720-0718A 720-0718C 720-0718N	720-0737 720-0825

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

Part Number: IGEIB2-B
Weight: 0.3

IGEIB2-B fits these 3 Nexgrill models:
720-0522	720-0522CAN	730-0522

Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25

46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-30B fits these 36 Nexgrill models:
720-0061-LP 720-0336B 720-0336C 720-0522 720-0522CAN 720-0549 720-0649	720-0650 720-0650A 720-0670A 720-0670C 720-0670E 720-0679 720-0679B	720-0679R 720-0691A 720-0709 720-0709B 720-0718 720-0718A 720-0718C	720-0718N 720-0719BL 720-0720 720-0737 720-0745 720-0773 9 more models...

Burner-mounted ceramic electrode, wire, and mounting bracket.

Part Number: IG-19B
Weight: 0.1

IG-19B fits these 71 Nexgrill models:
122.16641901 122.16648901 720-0193 720-0289 720-0294 720-0312 720-0335	720-0336B 720-0336C 720-0336D 720-0341 720-0396 720-0430 720-0432	720-0433 720-0439 720-0490 720-0522 720-0522CAN 720-0536 720-0539	720-0578 720-0582 720-0582B 720-0584 720-0584A 720-0600 44 more models...

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

Part Number: IG-15B
Weight: 0.3

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 07370
Dimensions: 4 3/16” x 0 3/4”
Material: ceramic
Weight: 0.1

07370 fits these 6 Nexgrill models:
720-0737 720-0744	720-0744A 720-0744B	720-0783E 720-0819

Ignition electrode For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04434
Dimensions: 4 3/16” x 1 1/16”
Weight: 0.1

04434 fits these 2 Nexgrill models:
720-0882S	720-0888N

electrode

Part Number: 04433
Dimensions: 4 1/2”
Weight: 1.0

04433 fits these 2 Nexgrill models:
720-0697E	720-0830D

electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

04432 fits these 7 Nexgrill models:
720-0709C 720-0719BL	720-0745A 720-0773	720-0778C 720-0783	720-0826

Burner mounted electrode for use with 15591 and 15491 burners.

• 11.5” wire with female spade connector
• Includes adapter wire part 03198 for applications needing male spade connector on electrode.

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430
Material: ceramic
Weight: 0.1

04430 fits these 9 Nexgrill models:
122.16641901 720-0341 720-0548	720-0549 720-0670 720-0670A	720-0670B 720-0679B 720-0679R

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter) For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03750 fits this one Nexgrill model:
720-0709B

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

03621 fits these 6 Nexgrill models:
720-0335 720-0336D	720-0709C 720-0745A	720-0778C 720-0826

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

03620 fits these 36 Nexgrill models:
720-0061-LP 720-0336B 720-0336C 720-0522 720-0522CAN 720-0549 720-0649	720-0650 720-0650A 720-0670A 720-0670C 720-0670E 720-0679 720-0679B	720-0679R 720-0691A 720-0709 720-0709B 720-0718 720-0718A 720-0718C	720-0718N 720-0719BL 720-0720 720-0737 720-0745 720-0773 9 more models...

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has eight (8) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03388
Dimensions: 3 1/2” x 2”
Weight: 0.5

03388 fits this one Nexgrill model:
720-0826

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

03380 fits these 4 Nexgrill models:
720-0697	720-0697E	720-0783	720-0830D

Battery powered, 7-outlets push button ignitor. Uses AA battery and requires a 7/8” mounting hole.

Part Number: 03377
Weight: 0.5

03377 fits this one Nexgrill model:
720-0882S

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has six (6) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03356
Dimensions: 3 3/8” x 2”
Weight: 0.7

03356 fits these 2 Nexgrill models:
720-0709C	720-0733

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.Note: Some original ignitors (spark generators) that 03352 replaces had an integrated ground wire that is not present on this part (03352). If the ignitor you are replacing has an integrated ground wire, you will also need our ground wire part# 03621.

• 1.5 volt
• Has five (5) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

03352 fits these 11 Nexgrill models:
720-0335 720-0336D 720-0511	720-0512 720-0584 720-0607	720-0709B 720-0727 720-0745A	720-0778A 720-0778C

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

03333 fits this one Nexgrill model:
720-0718B

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has two (2) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

Part Number: 03322
Dimensions: 2 5/8” x 2”
Weight: 0.5

03322 fits this one Nexgrill model:
720-0819

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

03199C fits this one Nexgrill model:
720-0709B

Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

• Can change male round to male spade
• Can change female spade to female round

ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

Trigger switch for spark generators that accept wired remote switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387and 03388.
Includes:

• Push-button trigger switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

03152 fits these 15 Nexgrill models:
720-0335 720-0336D 720-0511 720-0512	720-0584 720-0607 720-0709B 720-0709C	720-0727 720-0733 720-0745A 720-0778A	720-0778C 720-0819 720-0826

Replacement electrode.

• Ceramic insulator
• 25” wire with female spade connector
• Locking nuts.

Part Number: 01190
Material: ceramic
Weight: 0.2

01190 fits these 8 Nexgrill models:
720-0433 720-0549	720-0670A 720-0670C	720-0679 720-0679B	720-0679R 720-0697

Electrode and wire. Includes mounting bolt and nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

Part Number: 00162
Material: ceramic
Weight: 0.1

00162 fits these 3 Nexgrill models:
720-0744	720-0744A	720-0744B