Nexgrill 720-0670A Grill Parts

Highest quality replacement parts for your Nexgrill 720-0670A - Free USA shipping $49 or more* - No Sales Tax*

Nexgrill 720-0670A owners manual and diagrams

Diagrams & owners manual not available for grill model# 720-0670A. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Nexgrill model: 720-0670A

All of the parts we have for Nexgrill 720-0670A are shown on this page. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Nexgrill grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Nexgrill 720-0670A BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Nexgrill model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

720-0670A Burners

10000652A0 / CBP6

Click for photos

Stainless steel burner for Nexgrill model 720-0670A.

Part Number: CBP6 (Replaces Nexgrill 10000652A0)
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 1.0

NGKT1

Click for photos

Stainless steel burner for Nexgrill model 720-0670A.

Part Number: NGKT1
Dimensions: 14 7/8” x 1”
Material: stainless steel
Weight: 1.0

==> All Nexgrill Burners.

720-0670A Cooking Grids

13000123A0 / 61192

Click for photos

Cast iron cooking grids for Nexgrill model 720-0670A. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 61192 (Replaces Nexgrill 13000123A0)
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10

==> All Nexgrill Cooking Grids.

720-0670A Heat Plates

CLA-TS0153-X4

Click for photos

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for Nexgrill model 720-0670A. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153-X4
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 3.2

NGKHP3

Click for photos

Stainless steel Flame Tamer for Nexgrill model 720-0670A.

Part Number: NGKHP3
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.0

==> All Nexgrill Heat Plates.

720-0670A Igniter Components

10000175A0 / 04430

Click for photos

Burner mounted electrode for use with 15591 and 15491 burners.

39” wire with female spade connector
Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430 (Replaces Nexgrill 10000175A0)
Material: ceramic
Weight: 0.1

03750

Click for photos

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

04432

Click for photos

Electrode with 24.5” wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

01190

Click for photos

Replacement electrode.

Ceramic insulator
25” wire with female spade connector
Locking nuts.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01190
Material: ceramic
Weight: 0.2

IG-46B

Click for photos

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IG-19B

Click for photos

Burner-mounted ceramic electrode, wire, and mounting bracket.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-19B
Weight: 0.1

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

==> All Nexgrill Igniter Components.

720-0670A Accessories

00281

Click for photos

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

SR-7B

Click for photos

Universal 6 piece chrome plated skewer set. Designed so food does not rotate. Great for kabobs! 19 1/2” long.

Part Number: SR-7B
Dimensions: 19 1/2
Material: chrome steel
Weight: 1.0

42055

Click for photos

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

98121

Click for photos

Porcelain Coated Square Wok Topper.
12” x 12” x 2” porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.

Part Number: 98121
Material: porcelain steel
Weight: 1.6

SDDPS

Click for photos

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30

==> All 720-0670A Accessories.

BBQ Part Categories

Nexgrill grill model 720-0670A - Tuesday, Oct 7 2025

Return to Nexgrill grills main page

More Nexgrill grill models we have parts for

720-0336B | 720-0336C | 720-0336D | 720-0337 | 720-0339 | 720-0340 | 720-0341 | 720-0396 | 720-0419 | 720-0430 | 720-0432 | 720-0433 | 720-0439 | 720-0440-LP | 720-0441-LP | 720-0459 | 720-0486 | 720-0490 | 720-0511 | 720-0512 | 720-0522 | 720-0522CAN | 720-0536 | 720-0539 | 720-0548 | 720-0549 | 720-0578 | 720-0582 | 720-0582B | 720-0584 | 720-0584A | 720-0586 | 720-0586A | 720-0600 | 720-0607 | 720-0617 | 720-0649 | 720-0650 | 720-0650A | 720-0665 | 720-0670 | 720-0670B | 720-0670C | 720-0670E | 720-0671 | 720-0677 | 720-0678 | 720-0679 | 720-0679B | Complete list of Nexgrill grill models...

*Orders for Nexgrill grill model 720-0670A $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: Oct 7 2025