Nexgrill 720-0697 Grill Parts

Stainless steel burner for Nexgrill model 720-0697.

Part Number: BMGKTB1
Dimensions: 14 5/8
Material: stainless steel
Weight: 1.0

Channel formed U-shaped porcelain steel cooking grids for Nexgrill model 720-0697. Channel formed means rolled steel stamped into a U-shape; is not solid round rods. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 59812
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 27”
Material: stamped porcelain steel
Weight: 7.2

Cast iron cooking grids for Nexgrill model 720-0697. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 60042
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 26 3/4”
Material: matte cast iron
Weight: 14.0

Cast iron cooking grids for Nexgrill model 720-0697. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 66342
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 26 1/2”
Material: gloss cast iron
Weight: 10.1

Grillmaster Heat Plate for Nexgrill model 720-0697.

Part Number: GMNGHP1 (Replaces Nexgrill 04004007A0)
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.81

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for Nexgrill model 720-0697. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for Nexgrill model 720-0697. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Replacement electrode.

• Ceramic insulator
• 25” wire with female spade connector
• Locking nuts.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01190 (Replaces Nexgrill 10001373A0)
Material: ceramic
Weight: 0.2

Stainless steel grease tray. Includes grease cup and grease cup holder. Made in USA.

NOTE: Install into back of grill with drain hole on right side.

Part Number: CLA-DS0219
Dimensions: 14 15/16” x 27 9/16”
Material: stainless steel
Weight: 4.9

Straight thru L.P regulator with 28” hose. Adequate to 90,000 BTU.

Part Number: HR-6B
Dimensions: 28
Weight: 1.50

7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.

Part Number: 10892-7G
Weight: .45

Alternative warming rack, stainless steel. Includes stainless mounting nuts and bolts. Made in USA

Part Number: CLA-WS0217
Dimensions: 7 5/16” x 26 15/16”
Material: stainless steel
Weight: 1.7

Universal rotisserie kit. Same as RK-MHP except with addition of longer 36” spit rod. Includes:

• R06 stainless steel motor
• SR-8 36” X 5/16” spit rod
• SR-5 31” X 5/16” spit rod
• BU-1 spit rod bushing
• PH-1 spit rod handle
• MH-1B Chrome-plated meat forks
• MB-3B Inverted motor mounting bracket and screws
• MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting)
• Maximum 25 lbs. balanced load

Fits grills with hoods up to 31 inches wide. Be sure to measure before ordering.

Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes.

NOTE: This kit does NOT include spit counter balance, which should be used to insure even weight distribution.

NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” square rod, will not work with some of the parts in this kit.

Part Number: RK-MHP36
Weight: 4.6

Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Part Number: 22551 (Replaces Nexgrill 05000572A0)
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

Front clip-on shelf made specifically for Grillmaster model 720-0697 as an extra front workspace. Includes three pieces with nuts and bolts for assembly. Instructions included.

Dimensions:

• Side-To-Side: 26 7/16”
• Front-To-Back: 10 1/16”
• Height: 6”

Part Number: CLA-AS0218
Dimensions: 10 1/16” x 26 7/16”
Material: stainless steel
Weight: 3.45

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14