American Select Igniter Components
Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
Part Number: UP-9B Weight: 0.2
UP-9B fits these 2 American Select models: |
| | | | |
Universal 3 outlet rotary spark generator. Includes knob.
Part Number: UP-8B
Weight: 0.3
Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.
Part Number: UP-7B Weight: 0.3
UP-7B fits these 2 American Select models: |
| | | | |
Universal two outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-6B
Weight: 0.3
Universal one outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-5B
Weight: 0.12
Universal push-button igniter. Round male connector. Includes locking nut.
Part Number: UP-4B Weight: 0.3
UP-4B fits these 4 American Select models: |
| | | | |
20” igniter wire with female spade and round connector For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-7B Weight: 0.02
IG-7B fits these 7 American Select models: |
| | | | |
Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25
46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B Dimensions: 46
Weight: 0.1
IG-30B fits these 6 American Select models: |
| | | | |
Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners.
Part Number: IG-28B Weight: 0.2
IG-28B fits these 4 American Select models: |
| | | | |
20” igniter wire with two (2) female spade connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-18B Weight: 0.03
IG-18B fits these 5 American Select models: |
| | | | |
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
Part Number: IG-15B
Weight: 0.3
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil PrecisionFlame burner system, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers PFB-7, PFB-8, and PFB-9.
Includes:- Gas collector box
- Ceramic electrode
- Mounting screw
Part Number: IG-14B Weight: 0.3
IG-14B fits this one American Select model: |
| | | | |
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
Part Number: IG-11B Weight: 0.3
IG-11B fits these 6 American Select models: |
| | | | |
14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620 Weight: 0.1
03620 fits these 6 American Select models: |
| | | | |
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380 Dimensions: 3 5/16” x 2”
Weight: 0.7
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
Part Number: 03333 Dimensions: 2 9/16” x 2”
Weight: 0.5
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C Weight: 0.05
03199C fits these 6 American Select models: |
| | | | |
Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198 Weight: 0.05
Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05