Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
Part Number: UP-9B Weight: 0.2
| UP-9B fits these 6 Turbo models: |
| | | | |
Universal 3 outlet rotary spark generator. Includes knob.
Part Number: UP-8B
Weight: 0.3
Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.
Part Number: UP-7B Weight: 0.3
| UP-7B fits these 6 Turbo models: |
| | | | |
Universal two outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-6B
Weight: 0.3
Universal one outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-5B
Weight: 0.12
Universal push-button igniter. Round male connector. Includes locking nut.
Part Number: UP-4B
Weight: 0.3
Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
Part Number: TS-IG4010 Weight: 0.2
| TS-IG4010 fits these 27 Turbo models: |
| | | | |
Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).
Part Number: TS-IG2006 Weight: 0.2
| TS-IG2006 fits these 2 Turbo models: |
| | | | |
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
Part Number: IGEIB4-B Weight: 0.3
| IGEIB4-B fits these 27 Turbo models: |
| | | | |
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
Part Number: IGEIB2-B Weight: 0.3
| IGEIB2-B fits these 2 Turbo models: |
| | | | |
20” igniter wire with female spade and round connector For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-7B Weight: 0.02
| IG-7B fits these 4 Turbo models: |
| | | | |
Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25
46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B Dimensions: 46
Weight: 0.1
| IG-30B fits these 35 Turbo models: |
| | | | |
Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.
Part Number: IG-17B Weight: 0.11
| IG-17B fits these 4 Turbo models: |
| | | | |
Collector box and electrode assembly. fits many kenmore models usinf rail style cast iron burners (Command Flame and Command Flame II systems). The collector box is 4”.
Part Number: IG-16B Dimensions: 4
Weight: 0.2
| IG-16B fits these 5 Turbo models: |
| | | | |
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
Part Number: IG-15B
Weight: 0.3
14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620 Weight: 0.1
| 03620 fits these 35 Turbo models: |
| | | | |
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380 Dimensions: 3 5/16” x 2”
Weight: 0.7
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
Part Number: 03333 Dimensions: 2 9/16” x 2”
Weight: 0.5
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C Weight: 0.05
| 03199C fits these 6 Turbo models: |
| | | | |
Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198 Weight: 0.05
Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05
