Kitchen Aid Igniter Components
Universal 3 outlet rotary spark generator. Includes knob.
Part Number: UP-8B
Weight: 0.3
Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.
Part Number: UP-7B
Weight: 0.3
Universal two outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-6B
Weight: 0.3
Universal one outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-5B
Weight: 0.12
Universal push-button igniter. Round male connector. Includes locking nut.
Part Number: UP-4B
Weight: 0.3
Battery powered push button igniter.
- Has six (6) spade type male connectors.
- Uses 1 AA battery (not supplied)
- Requires 7/8” mounting hole.
Part Number: IGEIB6-B Weight: 0.3
IGEIB6-B fits these 2 Kitchen Aid models: |
| | | | |
Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25
46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B Dimensions: 46
Weight: 0.1
IG-30B fits these 2 Kitchen Aid models: |
| | | | |
Burner-mounted ceramic electrode, wire, and mounting bracket.
Part Number: IG-19B Weight: 0.1
IG-19B fits these 12 Kitchen Aid models: |
| | | | |
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
Part Number: IG-15B
Weight: 0.3
electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 07370 Dimensions: 4 3/16” x 0 3/4”
Material: ceramic
Weight: 0.1
07370 fits these 3 Kitchen Aid models: |
| | | | |
Ignition electrode For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04460 Dimensions: 4 5/16” x 1 1/2”
Weight: 0.2
04460 fits these 4 Kitchen Aid models: |
| | | | |
electrode
Part Number: 04433 Dimensions: 4 1/2”
Weight: 1.0
04433 fits this one Kitchen Aid model: |
| | | | |
electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04432 Dimensions: 4”
Material: ceramic
Weight: 0.1
04432 fits these 7 Kitchen Aid models: |
| | | | |
Burner mounted electrode for use with 15591 and 15491 burners.
- 11.5” wire with female spade connector
- Includes adapter wire part 03198 for applications needing male spade connector on electrode.
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04430 Material: ceramic
Weight: 0.1
04430 fits this one Kitchen Aid model: |
| | | | |
Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03621 Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1
03621 fits these 15 Kitchen Aid models: |
| | | | |
14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620 Weight: 0.1
03620 fits these 3 Kitchen Aid models: |
| | | | |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has eight (8) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03388 Dimensions: 3 1/2” x 2”
Weight: 0.5
03388 fits this one Kitchen Aid model: |
| | | | |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has seven (7) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03387 Dimensions: 3 3/8” x 2”
Weight: 0.5
03387 fits this one Kitchen Aid model: |
| | | | |
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380 Dimensions: 3 5/16” x 2”
Weight: 0.7
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has six (6) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03356 Dimensions: 3 3/8” x 2”
Weight: 0.7
03356 fits these 2 Kitchen Aid models: |
| | | | |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
Note: Some original ignitors (spark generators) that 03352 replaces had an integrated ground wire that is not present on this part (03352). If the ignitor you are replacing has an integrated ground wire, you will also need our ground wire part#
03621.
- 1.5 volt
- Has five (5) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03352 Dimensions: 3 3/8” x 2”
Weight: 0.7
03352 fits these 7 Kitchen Aid models: |
| | | | |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has four(4) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03344 Dimensions: 2” x 2 1/2”
Weight: 0.5
03344 fits this one Kitchen Aid model: |
| | | | |
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
Part Number: 03333 Dimensions: 2 9/16” x 2”
Weight: 0.5
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has two (2) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03322 Dimensions: 2 5/8” x 2”
Weight: 0.5
03322 fits these 7 Kitchen Aid models: |
| | | | |
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198 Weight: 0.05
Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05
Trigger switch for spark generators that accept wired remote switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387and 03388.
Includes:
- Push-button trigger switch with two male spade connectors on back
- Two 20” wires with female spade connectors
- One plastic mounting nut
Part Number: 03152 Dimensions: 17 3/4” x 1”
Weight: 0.1
03152 fits these 17 Kitchen Aid models: |
| | | | |