Universal 3 outlet rotary spark generator. Includes knob.
Part Number: UP-8B
Weight: 0.3
Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.
Part Number: UP-7B
Weight: 0.3
Universal two outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-6B
Weight: 0.3
Universal one outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-5B
Weight: 0.12
Universal push-button igniter. Round male connector. Includes locking nut.
Part Number: UP-4B
Weight: 0.3
20” igniter wire with female spade and round connector For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-7B Weight: 0.02
| IG-7B fits these 23 Arkla models: |
| | | | |
Ceramic electrode with bendable wire. Includes mounting bracket and flat male spade connector For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-6B
Weight: 0.3
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
Part Number: IG-5B Weight: 0.3
| IG-5B fits these 473 Arkla models: |
| | | | |
Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25
46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
Part Number: IG-15B Weight: 0.3
| IG-15B fits these 23 Arkla models: |
| | | | |
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
Part Number: IG-11B Weight: 0.3
| IG-11B fits these 23 Arkla models: |
| | | | |
OEM style collector box.
- Bolts onto burner with venturi
- Used with burners 11502, 15102, 15202, and 15402
- Use original electrode; replacement electrode # 04510 has been discontinued
Part Number: 05152 Material: stainless steel
Weight: 0.1
| 05152 fits these 23 Arkla models: |
| | | | |
OEM style collector box.
- Bolts onto burner with venturi
- Used with burners 15112 and 15222
- Use original electrode; replacement electrode # 04500 has been discontinued
Part Number: 05102 Material: stainless steel
Weight: 0.2
| 05102 fits these 19 Arkla models: |
| | | | |
14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380 Dimensions: 3 5/16” x 2”
Weight: 0.7
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
Part Number: 03333 Dimensions: 2 9/16” x 2”
Weight: 0.5
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198 Weight: 0.05
Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05
