Universal 3 outlet rotary spark generator. Includes knob.
Part Number: UP-8B
Weight: 0.3
Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.
Part Number: UP-7B
Weight: 0.3
Universal two outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-6B
Weight: 0.3
Universal one outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-5B
Weight: 0.12
Universal push-button igniter. Round male connector. Includes locking nut.
Part Number: UP-4B
Weight: 0.3
Push-button electronic igniter with one (1) spade connector. Black cap. 1 AAA battery (not included).
Part Number: TS-IG1004
Weight: 0.2
Push-button electronic igniter with one (1) spade connector. Silver cap. 1 AA battery required (not included).
Part Number: TS-IG1003
Weight: 0.2
Igniter collector box for GJK.
Part Number: KK-IB Weight: 0.15
KK-IB fits this one MHP model: |
| | | | |
Electronic Ignitor module.
- Two outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
Part Number: KK-EIB Weight: 0.3
KK-EIB fits this one MHP model: |
| | | | |
Battery powered push button igniter.
- Has one (1) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
Part Number: IGEIB-B Weight: 0.3
Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25
46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
Part Number: IG-15B
Weight: 0.3
12” connecting wire for use with rotary igniters. Does not fit battery-operated electronic igniters. Female spade connector on one end connects to electrode, female round connector on the other end connects to rotary igniter. FIts older JNR, WNK, and Patriot grills For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RIW Weight: 0.3
GG-RIW fits these 5 MHP models: |
| | | | |
Rotary Ignitor kit for JNR, WNK, TJK.
Includes:- GG-RI Rotary spark generator
- GG-K9 Knob
- GG-IB Electrode & Collector box
- GG-RIW Connecting wire
Part Number: GG-RIC Weight: 0.3
GG-RIC fits these 5 MHP models: |
| | | | |
Single outlet rotary ignitor. Fits JNR, WNK, TJK.
Part Number: GG-RI Weight: 0.1
GG-RI fits these 5 MHP models: |
| | | | |
Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK
Part Number: GG-IB Weight: 0.2
GG-IB fits these 15 MHP models: |
| | | | |
12” igniter connecting wire for battery-operated electronic igniters. Female spade connector on one end connects to igniter, female spade connector on the other connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-ERIW Weight: 0.3
GG-ERIW fits these 3 MHP models: |
| | | | |
3 Prong Electronic Ignitor for Infrared Grills
Part Number: GG-EIB3 Weight: 0.2
GG-EIB3 fits these 2 MHP models: |
| | | | |
Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.
Part Number: GG-EIB Weight: 0.2
GG-EIB fits these 14 MHP models: |
| | | | |
14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380 Dimensions: 3 5/16” x 2”
Weight: 0.7
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
Part Number: 03333 Dimensions: 2 9/16” x 2”
Weight: 0.5
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198 Weight: 0.05
Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05