MHP JNR Grill Parts

Exclusive patented H type stainless steel dual burner and venturi assembly for MHP model JNR. Burner gas ports are uniform in size and shape, providing uniform flame on each port. Entire venturi is made of stainless steel, has a built-in Spider Guard, and are bolt-on. Fits JNR and GJK

Part Number: HH-DSB13AM
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

stainless steel H Burner for JNR and GJK Burner only for MHP model JNR.

Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

SS twin venturi. For use with GG-DLB and HH-DSB H burners. Includes gaskets and hardware, and spider guards. Fits JNR, WNK, and TJK grills.

Part Number: GG-DV13
Material: stainless steel
Weight: 1.0

SearMagic Cooking Grids for JNR - SOLD INDIVIDUALLY, two (2) required for MHP model JNR. High Performance, Rust-Free Anodized Aluminum Cooking Grids. This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
See part HH-GRIDS-SET for a set of two (2).

Part Number: HH-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 10”
Weight: 4.0

Stainless steel cooking grid for JNR for MHP model JNR. JNR4 Series standard cooking grid is made of 1/4” stainless steel rods which are extremely durable and easy to clean. Each panel measures 15 1/2” x 9 15/16”.

Sold individually.

Part Number: HH-SSGRID2
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 3.2

Premium grade stainless steel rock grate with 1/4” rods for WNK & TJK model grills.

Part Number: HH-GRATE-SS
Dimension Front-to-Back: 13 5/8”
Dimension Side-to-Side: 18”
Weight: 5.5

JNR Deflector Shield For Control Panel for MHP model JNR.

Part Number: HH-DEF
Weight: 1.0

Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-EIB
Weight: 0.2

Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IB
Weight: 0.2

Flat washer for igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-M17
Weight: 0.1

Rotary Ignitor kit for JNR, WNK, TJK.

Includes:
• GG-RI Rotary spark generator
• GG-K9 Knob
• GG-IB Electrode & Collector box
• GG-RIW Connecting wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RIC
Weight: 0.3

Single outlet rotary ignitor. Fits JNR, WNK, TJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RI
Weight: 0.1

12” connecting wire for use with rotary igniters. Does not fit battery-operated electronic igniters. Female spade connector on one end connects to electrode, female round connector on the other end connects to rotary igniter. FIts older JNR, WNK, and Patriot grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RIW
Weight: 0.3

Rotary Ignitor Knob (Sometimes manufacturer supplies with white arrows or black imprinted arrows.)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-K9
Weight: 0.1

Stainless steel grease cup for JNR, WNK, and TJK.

Part Number: GG-GC
Weight: 0.3

Premium quality full-length vinyl fabric cover with E-Z on velcro tabs. Fits JNR and AMCJ model grills without a side burner.

• 48” left to right
• 20” front to back
• 35” top to bottom

Part Number: CV2PREM
Material: Vinyl
Weight: 3.5

Handle end caps, set of two # GG-SHC, for right and left side of stainless steel handle, with screws & gaskets for JNR, TJK, TRG, WNK, WRG.

Also included in handle kit GG-HANKIT.

Part Number: GG-SHC-SET
Weight: 0.3

Main control knob for JNR, WNK, TJK.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/4”

Part Number: GG-K10
Weight: 0.2

Propane Valve for JNR

Part Number: HH-VLV28
Weight: 0.4

Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2” diameter.
• Single prob
• Requires 3/8” mounting hole

Part Number: GG-TG4
Weight: 0.15

Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.

Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15

Stainless steel drop down side shelf kit can be used on right or left sides; includes hardware. The BBQ tools' hangers are on the end of the side shelf. (Previously, there were right and left side shelves with the BBQ tools' hangers on the front of the shelves.)

Part Number: HH-DDSKG
Weight: 3.5

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.


Part Number: SSST
Material: stainless steel
Weight: 1.5

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2