MHP GHJK3-NS Grill Parts

Burner support Bracket (Set of two) for MHP model GHJK3-NS.

Part Number: KK-BS
Weight: 0.3

Hybrid stainless steel burner support for MHP model GHJK3-NS.

Part Number: KK-HBC
Weight: 0.3

stainless steel H Burner for JNR and GJK Burner only for MHP model GHJK3-NS.

Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

Cast stainless steel oval burner for MHP model GHJK3-NS. Fits W3G, T3G, WHRG, THRG, GHJK.

Part Number: GG-HCSSB
Weight: 0.8

Rectangular Infra-Red Burner for WRG/TRG for MHP model GHJK3-NS. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4” by 6 1/2”. (For infrared burner clip, refer to your model number. There are two for different models: GG-IBC and KK-IBC.)

Part Number: GG-IRB
Dimensions: 14” x 6 1/2”
Weight: 3.05

Heavy-duty stainless steel cooking grid for GJK, WNK, and TJK series grills for MHP model GHJK3-NS.

• High grade stainless
• 5/16” solid stainless rods
• Sold individually.

Part Number: GG-SS-GRID
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 6.0

SearMagic Cooking Grid for models THRG, TRG, TJK, WNK, WHRG, WRG, W3G, and T3G for MHP model GHJK3-NS.

• High Performance, Rust-Free Anodized Aluminum Cooking Grids.
• Sold individually, number required varies

This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.

Part Number: GG-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 8”
Material: Anodized Aluminum
Weight: 2.2

SearMagic Cooking Grids for JNR - SOLD INDIVIDUALLY, two (2) required for MHP model GHJK3-NS. High Performance, Rust-Free Anodized Aluminum Cooking Grids. This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
See part HH-GRIDS-SET for a set of two (2).

Part Number: HH-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 10”
Weight: 4.0

Channel Design Stainless Steel Cooking Grid for MHP Grill Models for MHP model GHJK3-NS. Sold individually, requires two pieces.

Part Number: GG-SSGRIDAMC
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 2.40

Premium grade stainless steel rock grate with 1/4” rods'. FIts AMCJ, JNR, GJK & GHJK model grills.

• AMCJ & JNR Model Grills > Use 1 HH-GRATES-S
• GHJK Model Grills > Use 1 HH-GRATES-S
• GJK Model Grills > Use 2 HH-GRATES-S

Note: This part also known as HHGRATESS.

Part Number: HH-GRATE-SS
Dimension Front-to-Back: 13 5/8”
Dimension Side-to-Side: 18”
Weight: 5.5

Heat Plate/ Flame Tamer not known for MHP model GHJK3-NS. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Ignitor shield.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-DEF
Weight: 0.3

Electronic Ignitor module.

• Two outlets
• Uses AAA battery, not included
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-EIB
Weight: 0.3

Hybrid Electronic Ignitor module.

• Four outlets
• Uses AAA battery, not included
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-EIB4
Weight: 0.3

12” igniter connecting wire for battery-operated electronic igniters. Female spade connector on one end connects to igniter, female spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-ERIW
Weight: 0.3

Igniter collector box for GJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-IB
Weight: 0.15

Hybrid burner collector box.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-HIB
Weight: 0.2

Infrared/Hybrid Ignitor Probe

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IIP
Weight: 0.02

Infrared Hybrid Probe Shield

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IPS
Weight: 0.03

12ft vinyl 3/8” ID natural gas Sturgis hose (inside diameter 3/8” and outside diameter about 1/2”) with solid brass fittings. Use with brass coupler part# ASCPL-3 (not included). See part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-2
Weight: 2.5

Brass 3/8” Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-3
Weight: 0.4

Five piece 3/8” natural gas quick disconnect set includes:

• Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
• Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
• Hansen & Sturgis dust cover
• plastic dust plug
• Plastic 3/8 MPT Snap Tite
• Suitable up to approximately 60,000 BTU.

Part Number: ASCPL-1
Weight: 3.0

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

GrillPro Wood chips from genuine oak whiskey barrels.

• All natural wood smoke flavor
• Great for use in BBQ's or smokers.
• 170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Dimensions: 16” x 4”
Material: chrome steel
Weight: 0.9

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

• Ideal for searving or grilling appetizers
• Wide end for easy handling

Part Number: 11040
Dimensions: 7
Weight: 0.4

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2