MHP Burners

814532-R Flash Tube. Fits Wolf OG30, OG36, OG42, and OG54 series gas grills. May fit other models.

This aftermarket part replaces original Wolf part 814532.

NOTE: not for infrared burners.

Part Number: WLF-814532-R
Weight: 0.40

Standard stainless steel oval burner and venturi assembly. Includes:

• Burner
• Two venturi
• All necessary gaskets and screws

Part Number: OBS-PH34
Dimensions: 4” x 15”
Material: stainless steel
Weight: 2.05

OBS-PH34 fits these 8 MHP models:
SDBOCN SDBOCP	SDBOPN SDBOPP	SDSSOCN SDSSOCP	SDSSOPN SDSSOPP

Hybrid stainless steel burner support.

Part Number: KK-HBC
Weight: 0.3

KK-HBC fits these 6 MHP models:
GHJK3-NS GHJK3-PS	GJK3-N GJK3-NS	GJK3-P GJK3-PS

H Burner Kit With Venturis For GJK

Part Number: KK-DSB13
Weight: 3.0

KK-DSB13 fits this one MHP model:
GJK

Burner support Bracket (Set of two).

Part Number: KK-BS
Weight: 0.3

KK-BS fits these 7 MHP models:
GHJK3-NS GHJK3-PS	GJK GJK3-N	GJK3-NS GJK3-P	GJK3-PS

Exclusive patented H type stainless steel dual burner and venturi assembly. Burner gas ports are uniform in size and shape, providing uniform flame on each port. Entire venturi is made of stainless steel, has a built-in Spider Guard, and are bolt-on. Fits JNR and GJK

Part Number: HH-DSB13
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

HH-DSB13 fits these 12 MHP models:
GJK3BI JNR JNR3	JNR4 JNR4-N JNR4-NS	JNR4-P JNR4-PS JNR4DD-N	JNR4DD-NS JNR4DD-P JNR4DD-PS

stainless steel H Burner for JNR and GJK Burner only.

Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

HH-DSB fits these 19 MHP models:
GHJK3-NS GHJK3-PS GJK GJK3-N	GJK3-NS GJK3-P GJK3-PS GJK3BI	JNR JNR3 JNR4 JNR4-N	JNR4-NS JNR4-P JNR4-PS JNR4DD-N	JNR4DD-NS JNR4DD-P JNR4DD-PS

Burner for SBA2 side burner assembly..

Part Number: GG-SBA4
Weight: 1.0

GG-SBA4 fits this one MHP model:
Side-Burner-SBA2

Rectangular Infra-Red Burner for WRG/TRG. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4” by 6 1/2”. (For infrared burner clip, refer to your model number. There are two for different models: GG-IBC and KK-IBC.)

Part Number: GG-IRB
Dimensions: 14” x 6 1/2”
Weight: 3.05

GG-IRB fits these 12 MHP models:
GHJK3-NS GHJK3-PS JHJKBI3	THRG THRG2 THRG4	TRG TRG2 WHRG	WHRG4 WRG WRG2

Cast stainless steel oval burner. Fits W3G, T3G, WHRG, THRG, GHJK.

Part Number: GG-HCSSB
Weight: 0.8

GG-HCSSB fits these 11 MHP models:
GHJK3-NS GHJK3-PS JHJKBI3	T3G4DD THRG THRG2	THRG4 W3G W3G4DD	WHRG WHRG4

Stainless steel twin H burner and venturi assembly. Includes:

• One (1) twin SS H burner.
• Two (2) SS twist lock venturi.
• Built-in spider guards.
• Sold as assembly only, burner and venturi not available seperately.

Part Number: GG-DLB13TL
Dimensions: 19 1/2” x 8”
Weight: 3.0

GG-DLB13TL fits these 5 MHP models:
TJK	TRJK2	WNK	WNK3	WNK4

Stainless steel twin H burner and venturi assembly.Fits WNK and TJK grills. Includes:

• One (1) GG-DLB SS twin H burner.
• One (1) GG-DV-13 bolt-on twin venturi.
• All necessary gaskets and hardware.

Part Number: GG-DLB13
Dimensions: 8 1/4” x 20”
Material: stainless steel
Weight: 3.0

GG-DLB13 fits these 3 MHP models:
TJK	TRJK2	WNK

Large stainless steel twin H burner.

NOTE: This burner uses bolt-in venturis, such as part GG-DV13. It does not accept twist-in type venturis.

See part GG-DLB13 for both the burner and venturi in a kit.

Part Number: GG-DLB
Dimensions: 19 1/2” x 8”
Weight: 3.0

GG-DLB fits these 2 MHP models:
TJK	WNK