MHP Igniter Components

Universal 3 outlet rotary spark generator. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-7B
Weight: 0.3

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B
Weight: 0.3

Universal one outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-5B
Weight: 0.12

Universal push-button igniter. Round male connector. Includes locking nut. Color can varies gray or black by manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: UP-4B
Weight: 0.3

Electronic igniter with one (1) spade connector.

• One AA battery required (not included).
• Requires 7/8 inch mounting hole.
• Will have a silver or a black cap.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: SBB00047
Weight: 0.20

Electrode and 26” wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: PF80-3828S
Weight: 0.2

PF80-3828S fits these 4 MHP models:
LX26G	LX26R	LX33G	LX33R

Igniter collector box for GJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-IB
Weight: 0.15

KK-IB fits these 7 MHP models:
GHJK3-NS GHJK3-PS	GJK GJK3-N	GJK3-NS GJK3-P	GJK3-PS

Hybrid Electronic Ignitor module.

• Four outlets
• Uses AAA battery, not included
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-EIB4
Weight: 0.3

KK-EIB4 fits these 6 MHP models:
GHJK3-NS GHJK3-PS	GJK3-N GJK3-NS	GJK3-P GJK3-PS

Electronic Ignitor module.

• Two outlets
• Uses AAA battery, not included
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-EIB
Weight: 0.3

KK-EIB fits these 7 MHP models:
GHJK3-NS GHJK3-PS	GJK GJK3-N	GJK3-NS GJK3-P	GJK3-PS

Ignitor shield.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-DEF
Weight: 0.3

KK-DEF fits these 7 MHP models:
GHJK3-NS GHJK3-PS	GJK GJK3-N	GJK3-NS GJK3-P	GJK3-PS

Single Output Igniton Module. Fits many brands. Uses 1 AAA battery (not included) and requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: IGEIB15-B
Weight: 0.20

Battery powered push button igniter.

• Has one (1) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB-B
Weight: 0.3

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

Ignitor Module for SBA2 side burner and other applications. Has a single round connector. Installs behind the control panel. Can also be used on most grills which use a push-button single piezo plunger ignitor.

• Uses AA batery (not included)
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-SBA8
Weight: 0.3

GG-SBA8 fits this one MHP model:
Side-Burner-SBA2

Ceramic electrode with mounting bracket and 12” wire with round connector. Fits SBA2 side burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-SBA5
Weight: 0.2

GG-SBA5 fits this one MHP model:
Side-Burner-SBA2

12” connecting wire for use with rotary igniters. Does not fit battery-operated electronic igniters. Female spade connector on one end connects to electrode, female round connector on the other end connects to rotary igniter. FIts older JNR, WNK, and Patriot grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RIW
Weight: 0.3

GG-RIW fits these 5 MHP models:
JNR	JNR3	JNR4	TJK	WNK

Rotary Ignitor kit for JNR, WNK, TJK.

Includes:
• GG-RI Rotary spark generator
• GG-K9 Knob
• GG-IB Electrode & Collector box
• GG-RIW Connecting wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RIC
Weight: 0.3

GG-RIC fits these 5 MHP models:
JNR	JNR3	JNR4	TJK	WNK

Single outlet rotary ignitor. Fits JNR, WNK, TJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-RI
Weight: 0.1

GG-RI fits these 5 MHP models:
JNR	JNR3	JNR4	TJK	WNK

Rotary Ignitor Knob (Sometimes manufacturer supplies with white arrows or black imprinted arrows.)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-K9
Weight: 0.1

GG-K9 fits these 11 MHP models:
JNR JNR3 JNR4	TJK WCIFAB-N WCIFAB-P	WCIMPB-N WCIMPB-P WCIMPP-N	WCIMPP-P WNK

Infrared Hybrid Probe Shield

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IPS
Weight: 0.03

GG-IPS fits these 10 MHP models:
GHJK3-NS GHJK3-PS	THRG THRG4	TRG TRG2	WHRG WHRG4	WRG WRG2

Infrared/Hybrid Ignitor Probe

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IIP
Weight: 0.02

GG-IIP fits these 10 MHP models:
GHJK3-NS GHJK3-PS	THRG THRG4	TRG TRG2	WHRG WHRG4	WRG WRG2

Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IB
Weight: 0.2

GG-IB fits these 29 MHP models:
JNR JNR3 JNR4 JNR4-N JNR4-NS JNR4-P	JNR4-PS JNR4DD-N JNR4DD-NS JNR4DD-P JNR4DD-PS SDBOCN	SDBOCP SDBOPN SDBOPP SDSSOCN SDSSOCP SDSSOPN	SDSSOPP TJK WCIFAB-N WCIFAB-P WCIMPB-N WCIMPB-P	WCIMPP-N WCIMPP-P WNK WNK3 WNK4

Hybrid burner collector box.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-HIB
Weight: 0.2

GG-HIB fits these 6 MHP models:
GHJK3-NS GHJK3-PS	THRG THRG4	WHRG WHRG4

12” igniter connecting wire for battery-operated electronic igniters. Female spade connector on one end connects to igniter, female spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-ERIW
Weight: 0.3

GG-ERIW fits these 19 MHP models:
GHJK3-NS GHJK3-PS GJK GJK3-N	GJK3-NS GJK3-P GJK3-PS JNR3	JNR4 JNR4-N JNR4-NS JNR4-P	JNR4-PS JNR4DD-N JNR4DD-NS JNR4DD-P	JNR4DD-PS WNK3 WNK4

3 Prong Electronic Ignitor for Infrared Grills

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-EIB3
Weight: 0.2

GG-EIB3 fits these 8 MHP models:
THRG THRG4	TRG TRG2	WHRG WHRG4	WRG WRG2

Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-EIB
Weight: 0.2

GG-EIB fits these 22 MHP models:
JNR JNR3 JNR4 JNR4-N JNR4-NS	JNR4-P JNR4-PS JNR4DD-N JNR4DD-NS JNR4DD-P	JNR4DD-PS SDBOCN SDBOCP SDBOPN SDBOPP	SDSSOCN SDSSOCP SDSSOPN SDSSOPP TJK	WNK3 WNK4

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

Universal three-outlet battery powered push button ignitor.

• 1.5 volt
• Has three (3) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05