MHP JNR4-PS Grill Parts

Exclusive patented H type stainless steel dual burner and venturi assembly for MHP model JNR4-PS. Burner gas ports are uniform in size and shape, providing uniform flame on each port. Entire venturi is made of stainless steel, has a built-in Spider Guard, and are bolt-on. Fits JNR and GJK

Part Number: HH-DSB13AM
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

stainless steel H Burner for JNR and GJK Burner only for MHP model JNR4-PS.

Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

SearMagic Cooking Grids for JNR - SOLD INDIVIDUALLY, two (2) required for MHP model JNR4-PS. High Performance, Rust-Free Anodized Aluminum Cooking Grids. This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
See part HH-GRIDS-SET for a set of two (2).

Part Number: HH-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 10”
Weight: 4.0

Stainless steel cooking grid for JNR for MHP model JNR4-PS. JNR4 Series standard cooking grid is made of 1/4” stainless steel rods which are extremely durable and easy to clean. Each panel measures 15 1/2” x 9 15/16”.
NOTE: SOLD INDIVIDUALLY. TWO REQUIRED. SHIPS FROM THE MANUFACTURER IN A BOX OF TWO.

Part Number: HH-SSGRID2
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 3.2

Premium grade stainless steel rock grate with 1/4” rods'. FIts AMCJ, JNR, GJK & GHJK model grills.

• AMCJ & JNR Model Grills > Use 1 HH-GRATES-S
• GHJK Model Grills > Use 1 HH-GRATES-S
• GJK Model Grills > Use 2 HH-GRATES-S

Note: This part also known as HHGRATESS.

Part Number: HH-GRATE-SS
Dimension Front-to-Back: 13 5/8”
Dimension Side-to-Side: 18”
Weight: 5.5

JNR Deflector Shield For Control Panel for MHP model JNR4-PS.

Part Number: HH-DEF
Weight: 1.0

Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IB
Weight: 0.2

12” igniter connecting wire for battery-operated electronic igniters. Female spade connector on one end connects to igniter, female spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-ERIW
Weight: 0.3

Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-EIB
Weight: 0.2

Stainless steel grease cup for JNR, WNK, and TJK.

Part Number: GG-GC
Weight: 0.3

Main control knob for JNR, WNK, TJK.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/4”

Part Number: GG-K10
Weight: 0.2

Propane Valve for JNR

Part Number: HH-VLV28
Weight: 0.4

Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2” diameter.
• Single prob
• Requires 3/8” mounting hole

Part Number: GG-TG4
Weight: 0.15

Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.

Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

Bamboo Appetizer 7” Skewers - pack of eight. Limited to supplies on hand.


Part Number: 11040
Dimensions: 7
Weight: 0.4

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: CLWR
Material: stainless steel
Weight: 1.0

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3