Home Depot Igniter Components
Universal 3 outlet rotary spark generator. Includes knob.
Part Number: UP-8B Weight: 0.3
UP-8B fits this one Home Depot model: |
| | |
Universal push-button piezo igniter. External grounding tab for use as ground or to power a side burner igniter.
Part Number: UP-7B
Weight: 0.3
Universal two outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-6B
Weight: 0.3
Universal one outlet rotary spark generator. Includes knob and hardware.
Part Number: UP-5B
Weight: 0.12
Universal push-button igniter. Round male connector. Includes locking nut.
Part Number: UP-4B
Weight: 0.3
Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
Part Number: TS-IG4010 Weight: 0.2
TS-IG4010 fits these 3 Home Depot models: |
| | |
Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.
Part Number: TS-IG3007 Weight: 0.2
TS-IG3007 fits these 20 Home Depot models: |
| | |
IGNITOR WIRE MAIN BURNER *. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: SP65-20 Weight: 0.05
SP65-20 fits these 2 Home Depot models: |
| | |
ELECTRODE SIDE BURNER 500 *. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: SP56-20 Weight: 0.1
SP56-20 fits these 3 Home Depot models: |
| | |
Battery powered push button igniter.
- Has six (6) spade type male connectors.
- Uses 1 AA battery (not supplied)
- Requires 7/8” mounting hole.
Part Number: IGEIB6-B Weight: 0.3
IGEIB6-B fits these 11 Home Depot models: |
| | |
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
Part Number: IGEIB4-B Weight: 0.3
IGEIB4-B fits these 3 Home Depot models: |
| | |
Universal extention wire (male spade end & female round end). For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.25
46” Wire with female spade connectors and square plastic connectors For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B Dimensions: 46
Weight: 0.1
IG-30B fits these 26 Home Depot models: |
| | |
Collector Box asembly. Includes
- Collector box
- Ceramic elecrode
- Connecting wire
Part Number: IG-29B Dimensions: 4 5/16
Weight: 0.3
IG-29B fits this one Home Depot model: |
| | |
Electrode with wire for Fiesta Grills; use with burner FIET1.
Part Number: IG-27B Weight: 0.2
IG-27B fits these 4 Home Depot models: |
| | |
Collector box with ceramic electrode and wire.
Part Number: IG-23B Weight: 0.3
IG-23B fits these 10 Home Depot models: |
| | |
Collector box with ceramic electrode and wire.
Part Number: IG-22B Weight: 0.3
IG-22B fits these 10 Home Depot models: |
| | |
Collector box with ceramic igniter electrode and wire.
Part Number: IG-21B Weight: 0.2
IG-21B fits these 11 Home Depot models: |
| | |
Burner-mounted ceramic igniter electrode with mounting bracket and hardware For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-20B Weight: 0.05
IG-20B fits these 3 Home Depot models: |
| | |
Burner-mounted ceramic electrode, wire, and mounting bracket.
Part Number: IG-19B Weight: 0.1
IG-19B fits these 5 Home Depot models: |
| | |
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
Part Number: IG-15B
Weight: 0.3
Battery powered push button Igniter Kit.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” mounting hole.
NOTE: Part 50000816-R is a fully functional aftermarket replacement for Vermont Castings OEM part# 50000816, which is no longer available.
Part Number: 50000816-R Weight: 0.3
50000816-R fits this one Home Depot model: |
| | |
electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 09551 Material: ceramic
Weight: 0.1
09551 fits these 2 Home Depot models: |
| | |
Ceramic electrode and 40” wire with female spade connector For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 06730 Material: ceramic
Weight: 0.1
06730 fits these 5 Home Depot models: |
| | |
Burner mounted electrode. Mounts to flange on underside of burner.
- Ceramic insulator
- Mounting bracket with nut and bolt
- 8” wire with female spade connector
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04820 Material: ceramic
Weight: 0.1
04820 fits this one Home Depot model: |
| | |
electrode. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03821 Material: ceramic
Weight: 0.1
03821 fits this one Home Depot model: |
| | |
14” ground wire with female spade connector and eye connectors. For use with 1.5 volt spark generators including 03340 and 03350 For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620 Weight: 0.1
03620 fits these 22 Home Depot models: |
| | |
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380 Dimensions: 3 5/16” x 2”
Weight: 0.7
03380 fits these 5 Home Depot models: |
| | |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
Note: Some original ignitors (spark generators) that 03352 replaces had an integrated ground wire that is not present on this part (03352). If the ignitor you are replacing has an integrated ground wire, you will also need our ground wire part#
03621.
- 1.5 volt
- Has five (5) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03352 Dimensions: 3 3/8” x 2”
Weight: 0.7
03352 fits this one Home Depot model: |
| | |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has four(4) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
Part Number: 03344 Dimensions: 2” x 2 1/2”
Weight: 0.5
03344 fits this one Home Depot model: |
| | |
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
Part Number: 03333 Dimensions: 2 9/16” x 2”
Weight: 0.5
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL. For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198 Weight: 0.05
Universal 6” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire. Current supply has plastic protectors on each end, not shown in photo For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05
Trigger switch for spark generators that accept wired remote switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387and 03388.
Includes:
- Push-button trigger switch with two male spade connectors on back
- Two 20” wires with female spade connectors
- One plastic mounting nut
Part Number: 03152 Dimensions: 17 3/4” x 1”
Weight: 0.1
03152 fits these 2 Home Depot models: |
| | |