Brinkmann Flame Diffusers

Stainless steel Heat Plate.

Part Number: PFHP1
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 1.0

PFHP1 fits these 2 Brinkmann models:
810-8501-S	810-8502-S

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0215-X3
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.8

CLA-TS0215-X3 fits these 8 Brinkmann models:
810-9210-F 810-9210-M 810-9210-S	810-9211-S 810-9410-F 810-9410-M	810-9410-S 810-9510-S

Stainless steel Heat Distribution Plate / Flame Tamer. Made in USA. The pull rod, used to lift the part from the grill, is replaced with a pull hole.

NOTE: Can also be used as a replacement for ceramic radients. This part replaces the radients and the rack that holds them.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use


Part Number: CLA-TS0160
Dimension Front-to-Back: 18 11/16”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 1.8

CLA-TS0160 fits these 2 Brinkmann models:
810-8905-S	810-8907-S

SET OF FIVE (5) PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0159-X5
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 5.6

CLA-TS0159-X5 fits these 7 Brinkmann models:
810-7450-S 810-7451-F 810-7451-S	810-8500-S 810-8530-F 810-8530-S	810-8532-F

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0159-X4
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 4.48

CLA-TS0159-X4 fits these 7 Brinkmann models:
810-7450-S 810-7451-F 810-7451-S	810-8500-S 810-8530-F 810-8530-S	810-8532-F

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

CLA-TS0156-X4 fits these 36 Brinkmann models:
810-1575-W 810-2210-1 810-2250-1 810-2250-2 810-2310-1 810-2400-2 810-2400-3	810-4345-0 810-4580-F 810-4580-S 810-6320-B 810-6320-C 810-6320-V 810-6345-0	810-6345-1 810-6345-3 810-6355-T 810-6800-0 810-6800-B 810-6830-0 16 more models...

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1

CLA-TS0156-X3 fits these 36 Brinkmann models:
810-1575-W 810-2210-1 810-2250-1 810-2250-2 810-2310-1 810-2400-2 810-2400-3	810-4345-0 810-4580-F 810-4580-S 810-6320-B 810-6320-C 810-6320-V 810-6345-0	810-6345-1 810-6345-3 810-6355-T 810-6800-0 810-6800-B 810-6830-0 16 more models...

SET OF FIVE/5 PACK Stainless steel Heat Distribution Plates. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X5
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.7

CLA-TS0147-X5 fits these 4 Brinkmann models:
810-3412-D 810-9520-M	810-9520-S 810-9590-S

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.16

CLA-TS0147-X4 fits these 4 Brinkmann models:
810-3412-D 810-9520-M	810-9520-S 810-9590-S

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64

CLA-TS0135-X4 fits these 50 Brinkmann models:
810-1415-F 810-1415-W 810-1420-0 810-1420-1 810-1450-0 810-1450-1 810-1470-0	810-1570-0 810-2410-S 810-2415-W 810-2512-F 810-2512-S 810-2545-W 810-3250-F	810-3250-W 810-3350-F 810-3420-W 810-3660-0 810-3660-F 810-3660-S 30 more models...

Heavy duty 304 grade stainless steel Heat Distribution Plate/Flame Tamer. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0051
Dimension Front-to-Back: 13 11/16”
Dimension Side-to-Side: 11 1/4”
Material: stainless steel
Weight: 2.75

CLA-TS0051 fits these 5 Brinkmann models:
810-4415-0 810-4415-1	810-4415-2 810-4415-3	810-4675-0

SET OF FOUR/4 PACK Stainless steel Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0001-X4
Dimension Front-to-Back: 13 1/2”
Dimension Side-to-Side: 4 1/2”
Material: stainless steel
Weight: 2.8

CLA-TS0001-X4 fits these 13 Brinkmann models:
810-4415-4 810-4415-E 810-4415-T 810-4425-1 810-4435-1	810-4655-1 810-4675-1 810-4675-3 810-6440-T 810-6650-T	810-6668-0 810-6670-T 810-7625-0

Stainless steel Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0001
Dimension Front-to-Back: 13 1/2”
Dimension Side-to-Side: 4 1/2”
Material: stainless steel
Weight: 0.7

CLA-TS0001 fits these 13 Brinkmann models:
810-4415-4 810-4415-E 810-4415-T 810-4425-1 810-4435-1	810-4655-1 810-4675-1 810-4675-3 810-6440-T 810-6650-T	810-6668-0 810-6670-T 810-7625-0

Stainless steel Heat Distribution Plate / Flame Tamer.

Part Number: CHMBHP3
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: .66

CHMBHP3 fits these 50 Brinkmann models:
810-1415-F 810-1415-W 810-1420-0 810-1420-1 810-1450-0 810-1450-1 810-1470-0	810-1570-0 810-2410-S 810-2415-W 810-2512-F 810-2512-S 810-2545-W 810-3250-F	810-3250-W 810-3350-F 810-3420-W 810-3660-0 810-3660-F 810-3660-S 30 more models...

Stainless steel heat plate/Flame Tamer.

Part Number: CHMBHP2
Dimension Front-to-Back: 17 7/8”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 1.0

CHMBHP2 fits these 3 Brinkmann models:
810-7741-0	810-7741-W	810-7751-0

Stainless steel heat plate/Flame Tamer.


Part Number: CHMBHP1
Dimension Front-to-Back: 17 11/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 1.0

CHMBHP1 fits these 7 Brinkmann models:
810-7450-S 810-7451-F 810-7451-S	810-8500-S 810-8530-F 810-8530-S	810-8532-F

Stainless steel vented heat plate/Flame Tamer.

Part Number: CBHP6
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7

CBHP6 fits this one Brinkmann model:
810-8425-S

Brinkman Heat Distribution Plate

Part Number: BMHP9
Dimension Front-to-Back: 17 11/16”
Dimension Side-to-Side: 10 1/4”
Material: stainless steel
Weight: 1.75

BMHP9 fits these 2 Brinkmann models:
810-8750-F	810-8750-S

Stainless steel Heat Tent/ Flame Tamer. Sold individually, number required varies.

Part Number: BMHP8
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 9/16”
Material: stainless steel
Weight: 0.5

BMHP8 fits these 4 Brinkmann models:
810-3412-D 810-9520-M	810-9520-S 810-9590-S

Stainless steel heat plate/ Flame Tamer. Sold individually, number required varies.

Part Number: BMHP7
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5

BMHP7 fits these 11 Brinkmann models:
810-1750-S 810-1751-S 810-3551-0 810-3751-F	810-3752-F 810-3820-S 810-3821-F 810-3821-S	810-4551-0 810-6340-S 810-6570-F

Stainless steel flame tamer.

Part Number: BMHP6
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.0

BMHP6 fits these 8 Brinkmann models:
810-9210-F 810-9210-M 810-9210-S	810-9211-S 810-9410-F 810-9410-M	810-9410-S 810-9510-S

Stainless steel Heat Distribution Plate.

Part Number: BMHP5
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 0.65

BMHP5 fits these 3 Brinkmann models:
810-1455-S	810-1456-S	810-9425-W

Stainless steel heat tent for Brinkmann made grills. These stainless steel replacement plates are far superior to porcelain coated steel originals. Sold individually, number required varies.

Part Number: BMHP2
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 2.10

BMHP2 fits these 9 Brinkmann models:
810-2200-0 810-2210-0 810-2235-0	810-2250-0 810-2300-0 810-2300-B	810-2310-0 810-2320-B 810-2400-0

Brinkman Heat Plate

Part Number: BMHP11
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.60

BMHP11 fits these 7 Brinkmann models:
810-2411-F 810-2411-S 810-3885-F	810-3885-S 810-4420-F 810-6631-F	810-9490-0

Brinkman Heat Plate

Part Number: BMHP10
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 0.80

BMHP10 fits this one Brinkmann model:
810-4220-S

Stainless steel heat distribution plate.

Part Number: BMHP1
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.7

BMHP1 fits these 36 Brinkmann models:
810-1575-W 810-2210-1 810-2250-1 810-2250-2 810-2310-1 810-2400-2 810-2400-3	810-4345-0 810-4580-F 810-4580-S 810-6320-B 810-6320-C 810-6320-V 810-6345-0	810-6345-1 810-6345-3 810-6355-T 810-6800-0 810-6800-B 810-6830-0 16 more models...

Porcelain steel Heat Tent.

Part Number: 99451
Dimension Front-to-Back: 16 5/16”
Dimension Side-to-Side: 2 3/8”
Material: porcelain steel
Weight: 1.0

99451 fits this one Brinkmann model:
810-6550-S

Porcelain steel Heat Distribution Plate. Sold individually.

Part Number: 99441
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 2 5/16”
Material: porcelain steel
Weight: 1.0

99441 fits this one Brinkmann model:
810-6680-S

Porcelain steel Heat Tent. Sold individually.

Part Number: 99431
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 3 1/8”
Material: porcelain steel
Weight: 1.0

99431 fits these 2 Brinkmann models:
810-4221-S	810-6420-S

Porcelain steel Heat Distribution Plate. Sold individually.

Part Number: 99311
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

99311 fits these 2 Brinkmann models:
810-9213-S	810-9311-S

Porcelain steel Heat Distribution Plate. Sold individually.


Part Number: 99051
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 10 1/8”
Material: porcelain steel
Weight: 2.8

99051 fits these 2 Brinkmann models:
810-8905-S	810-8907-S

Porcelain steel Heat Distribution Plate. Sold individually.

Part Number: 98551
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 1.8

98551 fits these 2 Brinkmann models:
810-8550-S	810-8552-S

Flame Diffuser. Porcelain enameled, glossy finish.

Part Number: 96051
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/16”
Material: porcelain steel
Weight: 2.0

96051 fits these 13 Brinkmann models:
810-4040-0 810-4040-B 810-4435-3 810-4445-1 810-4495-0	810-4775-0 810-4775-1 810-6330-B 810-6345-T 810-7541-B	810-7541-W 810-8445-N 810-8448-F

Porcelain steel Heat Distribution Plate. Sold individually.

Part Number: 94281
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0

94281 fits this one Brinkmann model:
810-8534-S

Stainless steel Heat Distribution Plate for Sear Burner. Sold individually.

Part Number: 93661
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 0.8

93661 fits these 5 Brinkmann models:
810-3660-0 810-3660-F	810-3660-S 810-3661-F	810-6631-F

Porcelain steel heat distribution plate. Sold individually.

Part Number: 92391
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0

92391 fits this one Brinkmann model:
810-2390-S

Universal adjustable stainless steel heat plate/ Flame Tamer. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

Universal adjustable stainless steel heat plate/Flame Tamer. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Porcelain steel heat plate. Sold individually.

Part Number: 90611
Dimension Front-to-Back: 13 1/8”
Dimension Side-to-Side: 3 3/4”
Material: porcelain steel
Weight: 0.8

90611 fits these 3 Brinkmann models:
810-3330-F	810-3330-S	810-3331-F

Porcelain steel heat tent. Single piece.

Part Number: 90262-1PC
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 11 3/4”
Material: porcelain steel
Weight: 3.5

90262-1PC fits these 11 Brinkmann models:
810-2600-0 810-2600-1 810-2610-0 810-2630-0	810-2700-0 810-2700-1 810-2705-1 810-2720-0	810-2720-1 810-4400-0 810-4400-B

Porcelain steel Heat Tent. Sold as a set of two (2).

Part Number: 90262
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 23 1/2”
Material: porcelain steel
Weight: 7.0

90262 fits this one Brinkmann model:
810-4400-0