Brinkmann 810-3420-W Grill Parts

Brinkmann logo

 

 

Highest quality replacement parts for your Brinkmann 810-3420-W - Free USA shipping $49 or more* - No Sales Tax*

 

Brinkmann 810-3420-W owners manual and diagrams
Diagrams & owners manual not available for grill model# 810-3420-W. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for the Brinkmann model: 810-3420-W
This page shows all of the parts we know fit model Brinkmann 810-3420-W. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Brinkmann grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Brinkmann 810-3420-W BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Brinkmann model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


810-3420-W Burners

Stainless steel burner for Brinkmann model 810-3420-W.

Part Number: 10481
Dimensions: 13 3/4” x 1”
Material: stainless steel
Weight: 0.4

$32.54
 
Qty
 

 





810-3420-W Burner Brackets and Carryovers

09521
Stainless steel burner cross-over tube.

Part Number: 09521
Dimensions: 7 3/4” x 2 3/4”
Material: stainless steel
Weight: .10

$12.21
 
Qty
 

 





810-3420-W Cooking Grids

Cast iron cooking grids for Brinkmann model 810-3420-W. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 67692
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 26”
Material: matte cast iron
Weight: 13.2

$93.88
 
Qty
 

 





810-3420-W Heat Plates

Stainless steel Heat Distribution Plate / Flame Tamer for Brinkmann model 810-3420-W.

Part Number: CHMBHP3
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: .66

$22.29
 
Qty
 

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for Brinkmann model 810-3420-W. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64

$77.52
 
Qty
 

 





810-3420-W Igniter Components

Universal battery powered push button ignitor.
  • 1.5 volt
  • Has five (5) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

$38.00
 
Qty
 

Electrode and connector wire with female spade end for main burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 09581
Dimensions: 3 9/16” x 1 1/16”
Material: ceramic
Weight: 0.1

$11.25
 
Qty
 

 





810-3420-W Heat indicators and Meat Thermometers

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

$9.95
 
Qty
 

 





810-3420-W Accessories

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

$7.60
 
Qty
 

WB-8
Stainless steel straight handle grill brush with replaceable head. Brass bristles and scarper. See part# WB-8RH for replacement grill brush heads. 18 1/2” long.
This part is currently out of stock, but more are already on the way and expected to arrive SPRING 23

Part Number: WB-8
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.8

$18.95
 
Qty
 

 



BBQ Part Categories






















 
 

Brinkmann grill model 810-3420-W - Sunday, May 5 2024

Return to Brinkmann grill parts main page



More Brinkmann grill models we have parts for
810-9300-0 | 810-9310-S | 810-9311-S | 810-9325-0 | 810-9390-0 | 810-9390-1 | 810-9390-2 | 810-9400-0 | 810-9410-F | 810-9410-M | 810-9410-S | 810-9415-F | 810-9415-W | 810-9419-0 | 810-9419-1 | 810-9419-R | 810-9425-W | 810-9445-0 | 810-9490-0 | 810-9490-F | 810-9500-0 | 810-9510-S | 810-9520-F | 810-9520-M | 810-9520-S | 810-9590-S | 810-9600-F | 810-9605-0 | 810-9610-F | 810-9620-0 | 810-9620-A | 810-9620-F | 815-3680-S | 820-7310-S | 810-1100-S | 810-1325-0 | 810-1415-F | 810-1415-W | 810-1420-0 | 810-1420-1 | 810-1450-0 | 810-1450-1 | 810-1455-S | 810-1456-S | 810-1470-0 | 810-1525-0 | 810-1570-0 | 810-1575-W | 810-1750-S | Complete list of Brinkmann grill models...



*Orders for Brinkmann grill model 810-3420-W $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024