Brinkmann Portable Tailgate 810-9490-0 Grill Parts

Brinkmann 810-9490-0

Brinkmann Portable Tailgate 4 Burner Gas Grill

Highest quality replacement parts for your Brinkmann Portable Tailgate 810-9490-0 - Free USA shipping $49 or more* - No Sales Tax*

Brinkmann 810-9490-0 owners manual and diagrams

Diagrams & owners manual not available for grill model# 810-9490-0. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement BBQ grill parts for Brinkmann Portable Tailgate 810-9490-0

All of the parts we have for Brinkmann 810-9490-0 are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Brinkmann grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Brinkmann 810-9490-0 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Brinkmann model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

810-9490-0 Burners

BMTB3

Click for photos

Stainless steel burner for OEM # 154-9520-0 for Brinkmann model 810-9490-0.

Part Number: BMTB3
Dimensions: 15 5/16
Material: stainless steel
Weight: .70

812-7140-0 / CTB2

Click for photos

stainless steel burner for Brinkmann model 810-9490-0.

Part Number: CTB2 (Replaces Brinkmann 812-7140-0)
Dimensions: 16 1/4
Material: stainless steel
Weight: 1.0

FP-BR1001

Click for photos

Adjustable universal front-to-back tube burner with top-ported flame holes for Brinkmann model 810-9490-0. This burner may not work with existing ignition electrodes and back burner cross-overs.

Variable length burner adjusts from 13 1/2” to 17 1/2”.
Includes extra hardware and mounting brackets to accommodate almost all grills.
Comes with complete installation instructions and diagrams.

WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for ”Ordered Wrong Part.” You will be responsible for all shipping fees.

Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7

==> All Brinkmann Burners.

810-9490-0 Cooking Grids

115-7490-0 / CG-73P-CI-X3

Click for photos

Cast iron cooking grids for Brinkmann model 810-9490-0. SET OF THREE (3).

Porcelain treated, matte finish
3 panels, each 17 5/8” x 8 3/4”
Total width: 26 1/4”

Part Number: CG-73P-CI-X3 (Replaces Brinkmann 115-7490-0)
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 1/4”
Material: cast iron
Weight: 16.65

59812

Click for photos

Channel formed U-shaped porcelain steel cooking grids for Brinkmann model 810-9490-0. Channel formed means rolled steel stamped into a U-shape; is not solid round rods. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 59812
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 27”
Material: stamped porcelain steel
Weight: 7.2

64252

Click for photos

Cast iron cooking grids for Brinkmann model 810-9490-0. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 64252
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 28 1/8”
Material: matte cast iron
Weight: 13.12

==> All Brinkmann Cooking Grids.

810-9490-0 Heat Plates

BMHP11

Click for photos

Brinkman Heat Plate for Brinkmann model 810-9490-0.

Part Number: BMHP11
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.60

==> All Brinkmann Heat Plates.

810-9490-0 Igniter Components

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

119-4400-5 / TS-IG3007

Click for photos

Push-button electronic igniter with three (3) spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007 (Replaces Brinkmann 119-4400-5)
Weight: 0.2

03197

Click for photos

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

03342

Click for photos

Small AA battery powered push button spark generator.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

08502

Click for photos

Collector box, electrode, and 24” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 08502
Dimensions: 5 3/4
Material: stainless steel
Weight: 0.5

==> All Brinkmann Igniter Components.

810-9490-0 Regulators and Hoses

155-7600-0 / HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Brinkmann 155-7600-0)
Dimensions: 22
Weight: 0.8

==> All Brinkmann Regulators and Hoses.

810-9490-0 Accessories

BP-6

Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

SF-1

Click for photos

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

50426

Click for photos

Aluminum foil grilling trays. Package of three.

Heavy duty aluminum foil
Re-usable
Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

WB-7

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

==> All 810-9490-0 Accessories.

BBQ Part Categories

Brinkmann gas grill 810-9490-0 - Sunday, May 5 2024

Return to Brinkmann grill parts main page

More Brinkmann grill models we have parts for

810-1420-1 | 810-1450-0 | 810-1450-1 | 810-1455-S | 810-1456-S | 810-1470-0 | 810-1525-0 | 810-1570-0 | 810-1575-W | 810-1750-S | 810-1751-S | 810-2200-0 | 810-2210-0 | 810-2210-1 | 810-2235-0 | 810-2250-0 | 810-2250-1 | 810-2250-2 | 810-2300-0 | 810-2300-B | 810-2310-0 | 810-2310-1 | 810-2320-B | 810-2390-S | 810-2400-0 | 810-2400-2 | 810-2400-3 | 810-2410-F | 810-2410-S | 810-2411-F | 810-2411-S | 810-2415-W | 810-2500-0 | 810-2500-1 | 810-2511-F | 810-2511-S | 810-2512-F | 810-2512-S | 810-2545-W | 810-2600-0 | 810-2600-1 | 810-2610-0 | 810-2630-0 | 810-2700-0 | 810-2700-1 | 810-2705-1 | 810-2720-0 | 810-2720-1 | 810-3200-G | 810-3248-0 | Complete list of Brinkmann grill models...

*Orders for Brinkmann Portable Tailgate grill model 810-9490-0 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024