Grill-Parts home
 

Brinkmann 810-4580-F Grill Parts

Brinkmann logo

 

 

Highest quality replacement parts for your Brinkmann 810-4580-F - Free USA shipping $49 or more* - No Sales Tax*

 

Brinkmann 810-4580-F owners manual and diagrams
Diagrams & owners manual not available for grill model# 810-4580-F. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts to fit Brinkmann model: 810-4580-F
All of the parts we have for Brinkmann 810-4580-F are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Brinkmann grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Brinkmann 810-4580-F BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Brinkmann model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


810-4580-F Burners

14081
Click for photos
Stainless steel burner for Brinkmann model 810-4580-F.

Part Number: 14081
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

$32.05
 
Qty
 

==> All Brinkmann Burners.
 





810-4580-F Burner Brackets and Carryovers

BMCO4
Click for photos
Stainless steel cross over tube. Channels gas between burners.

Part Number: BMCO4
Dimensions: 2 3/8” x 7 9/16”
Material: stainless steel
Weight: 0.13

$13.80
 
Qty
 

==> All Brinkmann Burner Brackets and Carryovers.
 





810-4580-F Cooking Grids

CG-68P-CI-X3
Click for photos
Cast iron cooking grids for Brinkmann model 810-4580-F. SET OF THREE (3) panels.
  • Porcelain treated, matte finish
  • Each panel measures 18 7/8” x 10 1/2”
  • Overall dimensions: 18 7/8” x 31 1/2”


Part Number: CG-68P-CI-X3
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 31 1/2”
Material: cast iron
Weight: 21.6

$127.64
 
Qty
 

CG-71P-CI
Click for photos
Cast iron cooking grid for Brinkmann model 810-4580-F. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-71P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.55

$33.23
 
Qty
 

54453
Click for photos
Porcelain steel cooking grids for Brinkmann model 810-4580-F. Porcelain enameled, glossy finish. Sold as a set of three (3). If you prefer a heavier cast iron porcelain enameled glossy finish cooking grid, select four (4) panels of # 65131.

Part Number: 54453
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 31 1/2”
Material: porcelain steel wire
Weight: 15.10

$95.83
 
Qty
 

CG-68P-CI
Click for photos
Cast iron cooking grid for Brinkmann model 810-4580-F. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-68P-CI
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 10 1/2”
Material: cast iron
Weight: 7.2

$50.23
 
Qty
 

==> All Brinkmann Cooking Grids.
 





810-4580-F Heat Plates

BMHP1
Click for photos
Stainless steel heat distribution plate for Brinkmann model 810-4580-F.

Part Number: BMHP1
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.7

$21.09
 
Qty
 

CLA-TS0156-X3
Click for photos
SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers for Brinkmann model 810-4580-F. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1

$58.37
 
Qty
 

CLA-TS0156-X4
Click for photos
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers for Brinkmann model 810-4580-F. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

$74.78
 
Qty
 

==> All Brinkmann Heat Plates.
 





810-4580-F Igniter Components

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10
 
Qty
 

IG-31B
Click for photos
Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc….

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-31B
Weight: .05

$7.10
 
Qty
 

03342
Click for photos
Small AA battery powered push button spark generator.
  • 1.5 volt
  • Has two (2) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03342
Weight: 0.3

$31.50
 
Qty
 

==> All Brinkmann Igniter Components.
 





810-4580-F Heat indicators and Meat Thermometers

00013
Click for photos
heat indicator

Part Number: 00013
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2

$15.90
 
Qty
 

==> All Brinkmann Heat indicators and Meat Thermometers.
 





810-4580-F Accessories

BP-7
Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

$9.75
 
Qty
 

SF-1
Click for photos
Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

$15.90
 
Qty
 

41333
Click for photos
Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.85
 
Qty
 

WB-7
Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

$5.96
 
Qty
 

==> All 810-4580-F Accessories.
 



BBQ Part Categories






















 
 

Brinkmann 810-4580-F -Sunday, May 5 2024

Return to Brinkmann grill parts main page



More Brinkmann grill models we have parts for
810-8410-C | 810-8410-F | 810-8410-M | 810-8410-S | 810-8411-5 | 810-8411-C | 810-8425-S | 810-8445-F | 810-8445-N | 810-8445-W | 810-8446-N | 810-8448-F | 810-8500-S | 810-8501-S | 810-8502-S | 810-8530-F | 810-8530-S | 810-8532-F | 810-8532-S | 810-8533-S | 810-8534-S | 810-8550-S | 810-8552-S | 810-8640-S | 810-8750-F | 810-8750-S | 810-8752-S | 810-8905-S | 810-8907-S | 810-9200-0 | 810-9210-F | 810-9210-M | 810-9210-S | 810-9211-S | 810-9213-S | 810-9300-0 | 810-9310-S | 810-9311-S | 810-9325-0 | 810-9390-0 | 810-9390-1 | 810-9390-2 | 810-9400-0 | 810-9410-F | 810-9410-M | 810-9410-S | 810-9415-F | 810-9415-W | 810-9419-0 | 810-9419-1 | Complete list of Brinkmann grill models...



*Orders for Brinkmann grill model 810-4580-F $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024