Brinkmann 810-4580-S Grill Parts

Highest quality replacement parts for your Brinkmann 810-4580-S - Free USA shipping $49 or more* - No Sales Tax*

Brinkmann 810-4580-S owners manual and diagrams

Diagrams & owners manual not available for grill model# 810-4580-S. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Brinkmann model: 810-4580-S

This page shows all of the parts we know fit model Brinkmann 810-4580-S. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Brinkmann grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Brinkmann 810-4580-S BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Brinkmann model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

810-4580-S Burners

14081

Click for photos

Stainless steel burner for Brinkmann model 810-4580-S.

Part Number: 14081
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

==> All Brinkmann Burners.

810-4580-S Burner Brackets and Carryovers

BMCO4

Click for photos

Stainless steel cross over tube. Channels gas between burners.

Part Number: BMCO4
Dimensions: 2 3/8” x 7 9/16”
Material: stainless steel
Weight: 0.13

==> All Brinkmann Burner Brackets and Carryovers.

810-4580-S Cooking Grids

54453

Click for photos

Porcelain steel cooking grids for Brinkmann model 810-4580-S. Porcelain enameled, glossy finish. Sold as a set of three (3). If you prefer a heavier cast iron porcelain enameled glossy finish cooking grid, select four (4) panels of # 65131.

Part Number: 54453
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 31 1/2”
Material: porcelain steel wire
Weight: 15.10

CG-68P-CI

Click for photos

Cast iron cooking grid for Brinkmann model 810-4580-S. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-68P-CI
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 10 1/2”
Material: cast iron
Weight: 7.2

CG-68P-CI-X3

Click for photos

Cast iron cooking grids for Brinkmann model 810-4580-S. SET OF THREE (3) panels.

Porcelain treated, matte finish
Each panel measures 18 7/8” x 10 1/2”
Overall dimensions: 18 7/8” x 31 1/2”

Part Number: CG-68P-CI-X3
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 31 1/2”
Material: cast iron
Weight: 21.6

CG-71P-CI

Click for photos

Cast iron cooking grid for Brinkmann model 810-4580-S. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-71P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.55

==> All Brinkmann Cooking Grids.

810-4580-S Heat Plates

CLA-TS0156-X3

Click for photos

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers for Brinkmann model 810-4580-S. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1

CLA-TS0156-X4

Click for photos

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers for Brinkmann model 810-4580-S. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

BMHP1

Click for photos

Stainless steel heat distribution plate for Brinkmann model 810-4580-S.

Part Number: BMHP1
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.7

==> All Brinkmann Heat Plates.

810-4580-S Igniter Components

03342

Click for photos

Small AA battery powered push button spark generator.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03342
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-31B

Click for photos

Electrode to Fit Many Import Grills Including some Kenmore, BBQ Pro, Sam's Club, K-Mart, Etc….

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-31B
Weight: .05

==> All Brinkmann Igniter Components.

810-4580-S Heat indicators and Meat Thermometers

00013

Click for photos

heat indicator

Part Number: 00013
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2

==> All Brinkmann Heat indicators and Meat Thermometers.

810-4580-S Accessories

00220

Click for photos

GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

40259

Click for photos

15” Stainless steel tong.

Soft comfort grip
Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

76745

Click for photos

GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.

Part Number: 76745
Material: stainless
Weight: .2

00150

Click for photos

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

Works with both charcoal and gas grills.
Easy to use and refill.
Long lasting cast iron.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

CLWR

Click for photos

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: CLWR
Material: stainless steel
Weight: 1.0

BRACT

Click for photos

Stainless Steel Ash Cleaning Tray For Use In Ceramic Kamado Grills

Part Number: BRACT
Weight: 1.0

==> All 810-4580-S Accessories.

BBQ Part Categories

Brinkmann model 810-4580-S - Tuesday, May 12 2026

Return to Brinkmann grills main page

More Brinkmann grill models we have parts for

810-9419-R | 810-9425-W | 810-9445-0 | 810-9490-0 | 810-9490-F | 810-9500-0 | 810-9510-S | 810-9520-F | 810-9520-M | 810-9520-S | 810-9590-S | 810-9600-F | 810-9605-0 | 810-9610-F | 810-9620-0 | 810-9620-A | 810-9620-F | 815-3680-S | 820-7310-S | 810-1100-S | 810-1325-0 | 810-1415-F | 810-1415-W | 810-1420-0 | 810-1420-1 | 810-1450-0 | 810-1450-1 | 810-1455-S | 810-1456-S | 810-1470-0 | 810-1525-0 | 810-1570-0 | 810-1575-W | 810-1750-S | 810-1751-S | 810-2200-0 | 810-2210-0 | 810-2210-1 | 810-2235-0 | 810-2250-0 | 810-2250-1 | 810-2250-2 | 810-2300-0 | 810-2300-B | 810-2310-0 | 810-2310-1 | 810-2320-B | 810-2390-S | 810-2400-0 | Complete list of Brinkmann grill models...

*Orders for Brinkmann grill model 810-4580-S $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026