Kenmore Heat indicators and Meat Thermometers
Universal round stainless steel heat indicator.
- Color coded (Low, Med, High)
- Bolt on, single hole mounting
- 1.5 inch stem
- Stainless steel case.
- Requires 13/32inch mounting hole
Part Number: TG-5B Weight: 0.3
Universal round polished stainless steel heat indicator. Single mounting hole.
- Diameter 2 1/2”
- Lenght of sensor probe 1 5/8”
- Requires 3/8” mounting hole
Part Number: TG-4B Weight: 0.2
Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers. Stainless steel case.
Part Number: TG-2B
Weight: 0.2
Universal clip-on temperature gauge fits most grills. Find out if your grill is still hot at a glance.
Part Number: TG-1B
Weight: 0.3
LOGO GAUGE KENMORE D LID
Part Number: SP42A-30
Weight: 1.0
LOGO GAUGE KENMORE D LID
Part Number: SP42-30
Weight: 1.0
LOGO GAUGE KENMORE T LID
Part Number: SP25-30
Weight: 1.0
KENMORE LOGO GAUGE
Part Number: SP15-30
Weight: 1.0
KENMORE LOGO GAUGE T400 SERIES
Part Number: SP13-30
Weight: 1.0
Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.
- 2 1/2” diameter.
- Single prob
- Requires 3/8” mounting hole
Part Number: GG-TG4
Weight: 0.15
Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.
Part Number: 22551 Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2
| 22551 fits these 6 Kenmore models: |
| | | | |
Universal four piece mini thermometer set. Great gift idea.
- 2 calibrated for steak, and 2 for chicken
- Mini thermometers for testing doneness of individual cuts of meat
- Silicone bezels for easy removal when hot
- Always use caution when handling hot objects
Part Number: 11381 Weight: .25
heat indicator
Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2
Round heat indicator. Single probe. Requires 13/16” mounting hole.
Part Number: 00745 Dimensions: 3 1/8” x 3 1/8”
Weight: 0.3
| 00745 fits these 2 Kenmore models: |
| | | | |
Semi-circular, snap in heat indicator with 2 3/4” heat prob.
Part Number: 00473 Dimensions: 1 3/4” x 1 3/16”
Material: stainless steel
Weight: 0.1
| 00473 fits these 6 Kenmore models: |
| | | | |
Heat indicator with a single probe and requires a 5/16” mounting hole. Note, the back side DOES NOT have an alignment pin.
Part Number: 00021 Dimensions: 3 5/8” x 1 3/4”
Weight: 0.2
| 00021 fits these 30 Kenmore models: |
| | | | |
Round heat indicator.
- Single probe
- 3 1/8” diameter
- Requires .60” mounting hole
WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".
Part Number: 00020 Dimensions: 3 1/8” x 3 1/8”
Weight: .20
| 00020 fits these 7 Kenmore models: |
| | | | |
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Part Number: 00018 Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
| 00018 fits these 31 Kenmore models: |
| | | | |
heat indicator
Part Number: 00017 Dimensions: 3 3/4” x 1 7/8”
Weight: 0.1
| 00017 fits these 3 Kenmore models: |
| | | | |
Round heat indicator.
- Single 1 5/8” probe
- 2 1/8” diameter
- Requires 1/4” mounting hole
Part Number: 00015 Weight: 0.10
Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.
- Requires minimum 3/8” mounting hole
- Single 1 3/8” probe
- Threaded portion of probe stops at 1/2” from base
- See photo for details
Part Number: 00012 Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1
| 00012 fits these 32 Kenmore models: |
| | | | |
