Kenmore 415.16106210 Grill Parts

Stainless Steel tube burner for Kenmore model 415.16106210.

Part Number: CBP10 (Replaces Kenmore 302120027)
Dimensions: 14 7/8” x 1”
Material: stainless steel
Weight: .40

Stainless steel burner cross-over tube. Sometimes referred to as carry-over tubes or channels. Set of 3.

Part Number: 01673 (Replaces Kenmore SH101002707)
Dimensions: 7 1/2” x 1”
Material: stainless steel
Weight: 0.3

Premium quality stainless steel cooking grid for Kenmore model 415.16106210. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it..

• 304 commercial grade stainless steel
• Solid rod diameter 1/4”
• Made in USA.
• Sold individually.

Part Number: CLA-GS0189
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 13 1/8”
Material: stainless steel
Weight: 4.7

Porcelain steel cooking grids for Kenmore model 415.16106210. SET OF THREE (3).

• Porcelain enameled, glossy finish
• 3 panels, each 17 1/2” x 8 5/8”
• Total width: 25 7/8”

Part Number: 50263
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 25 7/8”
Material: porcelain steel wire
Weight: 10.8

Cast iron cooking grids for Kenmore model 415.16106210. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 61192
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10

Cast iron cooking grids for Kenmore model 415.16106210. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 66342 (Replaces Kenmore 302110037)
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 26 1/2”
Material: gloss cast iron
Weight: 10.1

Porcelain steel Flame Tamer for Kenmore model 415.16106210. Also known as a Heat Diffuser. Sold individually.

Part Number: 90681 (Replaces Kenmore 202150009)
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 4 5/8”
Material: porcelain steel
Weight: 0.7

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Battery powered push button igniter.

• Has two (2) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB2-B (Replaces Kenmore 302260011)
Weight: 0.3

Electrode with 24.5” wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04432 (Replaces Kenmore SH101002706)
Dimensions: 4”
Material: ceramic
Weight: 0.1

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.

• Requires minimum 3/8” mounting hole
• Single 1 3/8” probe
• Threaded portion of probe stops at 1/2” from base
• See photo for details

Part Number: 00012 (Replaces Kenmore SH302020010)
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.


Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30