Kenmore 415.162140 Grill Parts

Highest quality replacement parts for your Kenmore 415.162140 - Free USA shipping $49 or more* - No Sales Tax*

Kenmore 415.162140 owners manual and diagrams

Diagrams & owners manual not available for grill model# 415.162140. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement BBQ grill parts for Kenmore model: 415.162140

All of the parts we have for Kenmore 415.162140 are shown on this page. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Kenmore grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Kenmore 415.162140 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Kenmore model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

415.162140 Venturis

SG-B

Click for photos

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

==> All Kenmore Venturis.

415.162140 Cooking Grids

4152739 / CG-45SS

Click for photos

Commercial grade 304 stainless steel cooking grid with 1/4” diameter rods for Kenmore model 415.162140. Made in USA.

Part Number: CG-45SS (Replaces Kenmore 4152739)
Dimension Front-to-Back: 14”
Dimension Side-to-Side: 24”
Material: Stainless steel
Weight: 6.0

10225-T406

Click for photos

ONE PANEL for Kenmore model 415.162140. Genuine OEM cast iron cooking grid, single panel.

Sold individually
Number required varies
Porcelain treated, flat matte finish.

Part Number: 10225-T406
Dimension Front-to-Back: 14 1/8”
Dimension Side-to-Side: 12 1/4”
Material: Cast iron
Weight: 4.75

==> All Kenmore Cooking Grids.

415.162140 Heat Plates

4500326 / CLA-TS0024

Click for photos

Stainless steel VapoRiser Bar (V-Bar) for Kenmore model 415.162140. Sold individually, number required varies. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0024 (Replaces Kenmore 4500326)
Dimension Front-to-Back: 5 1/2”
Dimension Side-to-Side: 23 3/8”
Material: stainless steel
Weight: 2.3

==> All Kenmore Heat Plates.

415.162140 Igniter Components

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-18B

Click for photos

20” igniter wire with two (2) female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-18B
Weight: 0.03

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

UP-9B

Click for photos

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

5156113 / 03120

Click for photos

Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Part Number: 03120 (Replaces Kenmore 5156113)
Weight: 0.1

4500278 / IG-28B

Click for photos

Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-28B (Replaces Kenmore 4500278)
Weight: 0.2

03199C

Click for photos

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

==> All Kenmore Igniter Components.

415.162140 Knobs and Handles

4154559 / 04470

Click for photos

Black control knob.

Off position D-Value: 9 o'clock
Knob diameter: 1 3/4”
Socket diameter: 8mm
Knob shaft: None

Part Number: 04470 (Replaces Kenmore 4154559)
Dimensions: 1 7/8” x 1 7/8”
Material: plastic
Weight: 0.1

==> All Kenmore Knobs and Handles.

415.162140 Warming Racks

4152124 / 02124

Click for photos

Chrome steel bottom warming rack for Charbroil 7000 series U-burner grills.

Part Number: 02124 (Replaces Kenmore 4152124)
Dimensions: 23 1/2” x 10 1/2”
Material: chrome steel wire
Weight: 1.10

==> All Kenmore Warming Racks.

415.162140 Heat indicators and Meat Thermometers

4157171 / 00018

Click for photos

Round heat indicator.

Single probe
1 13/16” diameter
Requires 3/8” mounting hole

Part Number: 00018 (Replaces Kenmore 4157171)
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1

==> All Kenmore Heat indicators and Meat Thermometers.

415.162140 Accessories

BP-5

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

40240

Click for photos

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

BRGG

Click for photos

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

WB-8RH

Click for photos

Replacement brass bristle brush head for WB-8 brush. Screws included.

Part Number: WB-8RH
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.2

==> All 415.162140 Accessories.

BBQ Part Categories

Kenmore gas grill 415.162140 - Sunday, May 5 2024

Return to Kenmore grill parts main page

More Kenmore grill models we have parts for

2367970 | 2373180 | 2373680 | 2373780 | 2373880 | 2378320 | 2383080 | 2383081 | 2383580 | 2384580 | 2387690 | 2387691 | 239358 | 2397630 | 2397631 | 2397650 | 2397651 | 2397670 | 2397671 | 2397970 | 252358090 | 258.1015180 | 258.1024180 | 258.1026180 | 258.1026181 | 258.1028180 | 258.1029190 | 258.1036180 | 258.1036181 | 258.1037121 | 258.1037180 | 258.1046180 | 258.1046181 | 258.1046280 | 258.1048180 | 258.1049190 | 258.1049490 | 258.1049590 | 258.1050420 | 258.1054180 | 258.1055180 | 258.1055520 | 258.10557 | 258.1056080 | 258.1056081 | 258.1056180 | 258.1056181 | 258.1056280 | 258.1058080 | 258.1058180 | Complete list of Kenmore grill models...

*Orders for Kenmore grill model 415.162140 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024