Member's Mark Heat Tents

Stainless steel heat plate.

Part Number: SCHP6
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: stainless steel
Weight: 1.0

SCHP6 fits these 5 Member's Mark models:
B10PG20-2C	B10PG20-2R	GR2001402-MM-00	GR2001408-MM-00	GR3055-014571

Stainless steel heat plate; also referred to as a flame tamer and savor plate.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

SCHP4 fits these 3 Member's Mark models:
M3207ALP	M3207ANG	MG3208SLP

Stainless steel heat plate.

Part Number: SCHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/8”
Material: stainless steel
Weight: 1.3

SCHP2 fits these 9 Member's Mark models:
B09SMG-3 B09SMG1-3F	BQ05046-6 BQ05046-6-A	BQ05046-6A BQ05046-6N	BQ05046-6N-A BQ06043-1	BQ06043-1-N

Stainless steel heat plate.

Part Number: SCHP1
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 1.0

SCHP1 fits these 2 Member's Mark models:
M3206ALP	M3206ANG

Ceramic Flame Tamers. Box of 6. Use with rack part# BG-45 (see Rock Grates).

Part Number: SCFT
Dimension Front-to-Back: 7”
Dimension Side-to-Side: 8”
Material: ceramic
Weight: 12.0

SCFT fits these 19 Member's Mark models:
608SB MONARCH04ALP MONARCH04ANG MONARCH04BNG	REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC	Y0202XC Y0202XC-LP Y0202XC-NG Y0660	Y0660-1 Y0660LP Y0660LP-2 Y0660NG	Y0660NG-1 Y0660NG-2 Y0669NG

Rack for ceramic Flame Tamers; nickel plated heavy duty wire 5/16” thick. Uses 12 ceramic flame tamers part# P1736A-R (not included).

NOTE: This replacement part is not exactly like the original P1739A rack, but a very functional replacement. It cannot use the original ceramic Flame Tamers. The original rack held six larger Flame Tamers, while P01720021B-R uses twelve smaller ones. Using only 10 tamers will allow the smoker burner to remain uncovered as was the case with the original rack.

Part Number: P1739A-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

P1739A-R fits these 3 Member's Mark models:
Y0660	Y0660LP	Y0660NG

Nickel plated heavy duty steel 5/16” thick Flame Tamer rack. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.

Fits models:

• Y0101XC
• Y0202XC
• and others

Part Number: P1736B-R
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6

P1736B-R fits these 5 Member's Mark models:
Y0005XC-2	Y0101XC	Y0202XC	Y0202XC-LP	Y0202XC-NG

Ceramic Savor Plate. Measures 7 1/16” x 4 3/4”. Box of 4.

Note: This part is used in racks P01717003E, and P01717002E.

Fits models:

• M3905ALP
• M3905ANG
• M5205ALP
• M5205ANG
• And others

Part Number: P01804006A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0

P01804006A-R fits these 4 Member's Mark models:
M3905ALP	M3905ANG	M5205ALP	M5205ANG

Flame Tamer Rack. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P01804001A-R ceramic flame tamers (sold separately). Also known as part number P1736A.

NOTE: This is an aftermarket part made to replace original part number P01722021B, which is no longer available.

Fits models:

• MONARCH04
• Y0660
• and others

Part Number: P01722021B-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

P01722021B-R fits these 4 Member's Mark models:
MONARCH04ALP	MONARCH04ANG	Y0660LP-2	Y0660NG-2

Nickel plated heavy duty steel 5/16” thick Flame Tamer rack. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.

Fits models:

• Regal04
• Y005XC-1
• and others

Part Number: P01722001B-R
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6

P01722001B-R fits these 2 Member's Mark models:
REGAL04ALP	REGAL04ANG

Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P01717003E, which is no longer available.

Fits models:

• M3905ALP
• M3905ANG
• and others

Part Number: P01717003E-R
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: nickel plated steel
Weight: 1.0

P01717003E-R fits these 2 Member's Mark models:
M3905ALP	M3905ANG

Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P01717002E, which is no longer available.

Fits models:

• M5205ALP
• M5205ANG
• and others

Part Number: P01717002E-R
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: stainless steel
Weight: 1.0

P01717002E-R fits these 2 Member's Mark models:
M5205ALP	M5205ANG

Stainless steel heat plate/ Flame Tamer.

Part Number: NGSAMHP1
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 7/8”
Material: stainless steel
Weight: 0.6

NGSAMHP1 fits these 4 Member's Mark models:
720-0691A	720-0778A	720-0778C	730-0691A

Stainless steel Flame Tamer.

Part Number: NGKIRHP1
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 1.0

NGKIRHP1 fits this one Member's Mark model:
720-0582B

Nexgrill Heat Tent

Part Number: NGHP3
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.75

NGHP3 fits this one Member's Mark model:
720-0882D

Stainless steel Flame Tamer.

Part Number: NGHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 1.0

NGHP2 fits this one Member's Mark model:
720-0709B

Stainless steel Flame Tamer.

Part Number: NGCHP4
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 5 7/8”
Material: stainless steel
Weight: 0.7

NGCHP4 fits these 3 Member's Mark models:
720-0584	720-0584A	730-0584

Stainless steel Flame Tamer.

Part Number: NGCHP2
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 0.7

NGCHP2 fits these 2 Member's Mark models:
720-0586	730-0586

Stainless Steel Flame Tamers for Master Forge BG179 series gas grills. SET OF FOUR (4).

Part Number: MFHP2-X4
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 2.8

MFHP2-X4 fits this one Member's Mark model:
BG179A

Stainless Steel Flame Tamers for Master Forge BG179 series gas grills. SET OF Three (3).

Part Number: MFHP2-X3
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 2.1

MFHP2-X3 fits this one Member's Mark model:
BG179A

Master Forge stainless steel Flame Tamer.

Part Number: MFHP2
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.70

MFHP2 fits this one Member's Mark model:
BG179A

Stainless steel heat plate/ Flame Tamer.

Part Number: KENHP3
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.6

KENHP3 fits these 3 Member's Mark models:
CG2320401-MM	PG-4030400LG	PG-40606SOLA

Grillmaster Heat Plate

Part Number: GMNGHP1
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.81

GMNGHP1 fits this one Member's Mark model:
720-0830F

Stainless steel Flavor Grid for Fire Magic Regal II series grills.

• Sold individually
• Commercial grade 304 stainless steel
• Number required varies by model

Part Number: FMHP3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 7/716”
Material: stainless steel
Weight: 1.0

SET OF THREE/3 PACK Stainless steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.

Part Number: CLA2721-X3
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 9 3/4”
Material: stainless steel
Weight: 7.2

Stainless steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.

Part Number: CLA2721
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 9 3/4”
Material: stainless steel
Weight: 2.4

CLA2721 fits these 19 Member's Mark models:
608SB MONARCH04ALP MONARCH04ANG MONARCH04BNG	REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC	Y0202XC Y0202XC-LP Y0202XC-NG Y0660	Y0660-1 Y0660LP Y0660LP-2 Y0660NG	Y0660NG-1 Y0660NG-2 Y0669NG

Replacement steel Flame Tamer. For many models, can also be used to replace ceramic flame tamers and the rack that holds them. Made in USA.

Part Number: CLA1721
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 9 3/4”
Material: carbon steel
Weight: 3.5

CLA1721 fits these 19 Member's Mark models:
608SB MONARCH04ALP MONARCH04ANG MONARCH04BNG	REGAL04ALP REGAL04ANG Y0005XC-2 Y0101XC	Y0202XC Y0202XC-LP Y0202XC-NG Y0660	Y0660-1 Y0660LP Y0660LP-2 Y0660NG	Y0660NG-1 Y0660NG-2 Y0669NG

Stainless steel Heat Distribution Plate also known as a Flame Tamer and Heat Plate. Fits Member's Mark grill model GR2150901-MM-00. Sold individually, four required. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0420
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: .90

CLA-TS0420 fits this one Member's Mark model:
GR2150901-MM-00

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

CLA-TS0314 fits these 3 Member's Mark models:
M3207ALP	M3207ANG	MG3208SLP

SET OF FOUR/4 PACK Stainless steel Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0216-X4
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 4 7/8”
Material: stainless steel
Weight: 3.2

CLA-TS0216-X4 fits these 4 Member's Mark models:
720-0691A	720-0778A	720-0778C	730-0691A

SET OF FOUR/4 PACK Stainless steel heat plate. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0193-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 2.6

CLA-TS0193-X4 fits these 3 Member's Mark models:
CG2320401-MM	PG-4030400LG	PG-40606SOLA

SET OF FIVE/5 PACK Stainless steel heat plate/Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X5
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.85

CLA-TS0158-X5 fits this one Member's Mark model:
720-0709B

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X4
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.08

CLA-TS0158-X4 fits this one Member's Mark model:
720-0709B

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

CLA-TS0157-X4 fits this one Member's Mark model:
720-0830F

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

CLA-TS0157-X3 fits this one Member's Mark model:
720-0830F

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

CLA-TS0156-X4 fits this one Member's Mark model:
GR3055-14684

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1

CLA-TS0156-X3 fits this one Member's Mark model:
GR3055-14684

SET OF THREE/3 PACK Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

CLA-TS0151-X3 fits these 11 Member's Mark models:
B09SMG-3 B09SMG1-3F BQ05046-6	BQ05046-6-A BQ05046-6A BQ05046-6N	BQ05046-6N-A BQ06042-1 BQ06042-1-N	BQ06043-1 BQ06043-1-N

Stainless steel Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0083
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 0.9

CLA-TS0083 fits these 4 Member's Mark models:
720-0582	720-0584A	730-0582	730-0584

SET OF FOUR/4 PACK Stainless steel Flame Tamer/heat plate.

This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.

• Sold individually, number required varies.
• Shipped with protective peel-off coating, remove before use.
• Made in USA.

Part Number: CLA-TS0020-X4
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 3.2

CLA-TS0020-X4 fits these 3 Member's Mark models:
720-0586	720-0586A	730-0586

SET OF THREE/3 PACK Stainless steel Flame Tamer/heat plate.

This heat plate also provides an economical alternative to some other heat plates with the same front-to-back dimension.

• Sold individually, number required varies.
• Shipped with protective peel-off coating, remove before use.
• Made in USA.

Part Number: CLA-TS0020-X3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 2.4

CLA-TS0020-X3 fits these 3 Member's Mark models:
720-0586	720-0586A	730-0586

Stainless steel heat plate/ Flame Tamer. Sold individually, number required varies.

Part Number: BMHP7
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5

BMHP7 fits this one Member's Mark model:
GR2210601-MM-00

Stainless steel heat distribution plate.

Part Number: BMHP1
Dimension Front-to-Back: 16 3/4”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.7

BMHP1 fits this one Member's Mark model:
GR3055-14684

Porcelain steel Flame Tamers. SET OF SIX.

Part Number: 97371-X6
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

97371-X6 fits this one Member's Mark model:
720-0830F

Stainless steel heat diffusers. SET OF THREE (3). On some grill models it is also known as a Flame Tamer.

Part Number: 96421-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4 5/8”
Material: stainless steel
Weight: 2.55

96421-X3 fits these 3 Member's Mark models:
B09SMG-3	B09SMG1-3F	BQ05051-3

Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer.

Part Number: 96421
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4 5/8”
Material: stainless steel
Weight: 0.85

96421 fits these 5 Member's Mark models:
B09SMG-3	B09SMG1-3F	BQ05051-3	BQ06043-1	BQ06043-1-N

Porcelain steel Flame Tamers.

SET OF EIGHT (8).

Part Number: 93281-X8
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 13.6

93281-X8 fits this one Member's Mark model:
GR2039201-MM-00

Porcelain steel Flame Tamer. Sold individually.

Part Number: 93281
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 1.7

93281 fits this one Member's Mark model:
GR2039201-MM-00

Porcelain steel Heat Diffuser. Sold individually. Also known as a Flame Tamer.

Part Number: 93051
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 4 15/16”
Material: porcelain steel
Weight: 1.6

93051 fits this one Member's Mark model:
720-0584A

Porcelain steel Flame Tamer.

Part Number: 92291
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5

92291 fits these 2 Member's Mark models:
GR2234801-MM-00	GR2234802-MM-00

Porcelain steel Heat Diffuser. Sold individually.

Part Number: 92021-X2
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: porcelain steel
Weight: 2.6

92021-X2 fits these 5 Member's Mark models:
B10PG20-2C	B10PG20-2R	GR2001402-MM-00	GR2001408-MM-00	GR3055-014571

Stainless steel Heat Tents. SET OF FIVE (5).

Part Number: 91921-X5
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 4.5

91921-X5 fits these 2 Member's Mark models:
GAS0565AS	GAS056ASO

stainless steel heat plate

Part Number: 91921
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 0.9

91921 fits these 2 Member's Mark models:
GAS0565AS	GAS056ASO

Porcelain steel Flame Tamer. Sold individually.

Part Number: 90731
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: porcelain steel
Weight: 1.0

90731 fits this one Member's Mark model:
720-0709B

Stainless steel replacement Heat Tent. Far better rust and corrosion resistance than the original porcelain steel version. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating, remove before use.

Part Number: 47183T-24-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.80

47183T-24-R fits this one Member's Mark model:
GR2071008-MM-00

stainless steel Flav-R-Wave heat plate.

Part Number: 10222-T225
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 9 1/8”
Material: stainless steel
Weight: 1.85

10222-T225 fits this one Member's Mark model:
B09PG-4CP