Sonoma SGR30 Grill Parts

Sonoma SGR30

Sonoma 30" Platinum Edition gas grill

Highest quality replacement parts for your Sonoma SGR30 - Free USA shipping $49 or more* - No Sales Tax*

Sonoma SGR30 owners manual and diagrams

Diagrams & owners manual not available for grill model# SGR30. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts to fit Sonoma model: SGR30

All of the parts we have for Sonoma SGR30 are shown on this page. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Sonoma grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Sonoma SGR30 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Sonoma model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

SGR30 Burners

CLA-BL0229

Click for photos

304 Stainless steel infrared rear rotisserie burner with ceramic wafer for Sonoma model SGR30. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 that can be drilled for LP gas or natural gas.

Dimensions:

Maximum overall length, including mounting tab on one end: 17”
Maximum width: 3 3/8”
Burner box 15 3/8” x 3 3/8”
Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

SONT3

Click for photos

Stainless steel triple burner assembly set for Sonoma model SGR30.

Part Number: SONT3
Dimensions: 17 13/16” x 18 1/2”
Material: stainless steel
Weight: 1.6

==> All Sonoma Burners.

SGR30 Burner Brackets and Carryovers

CLA-MS0116

Click for photos

Stainless steel Z-Bar burner support bracket. Made in USA
This part is currently out of stock, but more are already on the way and expected to arrive mid May

Part Number: CLA-MS0116
Dimensions: 2” x 23”
Material: stainless steel
Weight: 0.70

==> All Sonoma Burner Brackets and Carryovers.

SGR30 Cooking Grids

53S33

Click for photos

Stainless steel cooking grids with solid 1/4” rods (set of 3) for Sonoma model SGR30.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

==> All Sonoma Cooking Grids.

SGR30 Heat Plates

CLA-MS0085

Click for photos

Electrode heat shield for Sonoma model SGR30. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0085
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: ”
Material: stainless steel
Weight: 0.4

CLA-MS0181

Click for photos

Bottom Flavor Grid for Sonoma model SGR30. Stainless steel. Made in USA.

Part Number: CLA-MS0181
Dimension Front-to-Back: 12”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.70

CLA-TS0182

Click for photos

Upper flavor grid for Sonoma model SGR30. Stainless steel. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

NOTE: Has unique underside, see photos.

Part Number: CLA-TS0182
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.2

SONHP1

Click for photos

Stainless steel Flavor Grid for Sonoma model SGR30.

Part Number: SONHP1
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.6

==> All Sonoma Heat Plates.

SGR30 Igniter Components

10342-T12

Click for photos

21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

IG-25B

Click for photos

Ceramic electrode with mounting bracket. For use with triple burner assembly part# SONT3 and ALTT3.

Sold individually, two (2) required
Use old screws and support plate

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-25B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

==> All Sonoma Igniter Components.

SGR30 Valves, Orifices, and Manifolds

CLA-VB0245

Click for photos

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

==> All Sonoma Valves, Orifices, and Manifolds.

SGR30 Accessories

00240

Click for photos

Cherry wood chips.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00240
Weight: 1.14

40730

Click for photos

2 in 1 chrome plated turner / tong with PVC coated handle

Part Number: 40730
Dimensions: 14
Material: chrome steel
Weight: 0.6

76745

Click for photos

GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.

Part Number: 76745
Material: stainless
Weight: .2

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

98130

Click for photos

Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Dimensions: 11
Material: porcelain steel
Weight: 1.0

BRACT

Click for photos

Stainless Steel Ash Cleaning Tray For Use In Ceramic Kamado Grills

Part Number: BRACT
Weight: 1.0

==> All SGR30 Accessories.

BBQ Part Categories

Sonoma SGR30 -Tuesday, May 12 2026

Return to Sonoma grills main page

More Sonoma grill models we have parts for
CGR27 \| CGR27LP \| CGR30 \| CGR30LP \| CGR30NG \| CGR44 \| CGR54 \| PF30LP \| PFISLP \| PFISNG \| PFSISLP \| SGIR27LP \| SGR27LP \| SGR30LP \| SGR30MLP \|

*Orders for Sonoma grill model SGR30 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026