Sonoma CGR27LP Grill Parts

Highest quality replacement parts for your Sonoma CGR27LP - Free USA shipping $49 or more* - No Sales Tax*

Sonoma CGR27LP owners manual and diagrams

Diagrams & owners manual not available for grill model# CGR27LP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Sonoma model: CGR27LP

All of the parts we have for Sonoma CGR27LP are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Sonoma grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Sonoma CGR27LP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Sonoma model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CGR27LP Burners

Click for photos

Stainless steel triple burner set for Sonoma model CGR27LP.

Part Number: SONT3
Dimensions: 17 13/16” x 18 1/2”
Material: stainless steel
Weight: 1.6

==> All Sonoma Burners.

CGR27LP Burner Brackets and Carryovers

Click for photos

Stainless steel Z-Bar burner support bracket. Made in USA

Part Number: CLA-MS0116
Dimensions: 2” x 23”
Material: stainless steel
Weight: 0.70

==> All Sonoma Burner Brackets and Carryovers.

CGR27LP Cooking Grids

Click for photos

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel for Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700 for Sonoma model CGR27LP. Channel formed means rolled steel stamped into a U-shape; is not solid round rods.

Part Number: CG-85SSET
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 5.45

Click for photos

Cast iron cooking grid set for Sonoma model CGR27LP. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 67672
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 23 1/2”
Material: matte cast iron
Weight: 1.0

Cast iron cooking grids for Sonoma model CGR27LP. SET OF TWO (2). Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-57P-CI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 14.7

==> All Sonoma Cooking Grids.

CGR27LP Heat Plates

Click for photos

Bottom Flavor Grid for Sonoma model CGR27LP. Stainless steel. Made in USA.

Part Number: CLA-MS0181
Dimension Front-to-Back: 12”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.70

Click for photos

Large Flavor Grid for Sonoma model CGR27LP. Stainless steel. Only one of these are used on the grill. This part has an extended side that faces the infrared burner and acts as a heat shield. The other Flavor Grids do not have this shield.

One required per grill.
Sold individually.
Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA

Part Number: CLA-TS0072
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 1.2

Click for photos

Stainless steel Flavor Grid for Sonoma model CGR27LP.

Part Number: SONHP1
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.6

==> All Sonoma Heat Plates.

CGR27LP Igniter Components

Click for photos

21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive early July

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

Click for photos

Ceramic electrode with mounting bracket. For use with triple burner assembly part# SONT3 and ALTT3.

Sold individually, two (2) required
Use old screws and support plate

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-25B
Weight: 0.3

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

==> All Sonoma Igniter Components.

CGR27LP Miscellaneous Repair Parts

Click for photos

Electrode heat shield. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0085
Dimensions: 16 13/16
Material: stainless steel
Weight: 0.4

==> All Sonoma Miscellaneous Repair Parts.

CGR27LP Accessories

Click for photos

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.

Part Number: SSST
Material: stainless steel
Weight: 1.5

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

==> All CGR27LP Accessories.

BBQ Part Categories

Sonoma grill model CGR27LP - Tuesday, Jun 10 2025

Return to Sonoma grills main page

More Sonoma grill models we have parts for
CGR27 \| CGR30 \| CGR30LP \| CGR30NG \| CGR44 \| CGR54 \| PF30LP \| PFISLP \| PFISNG \| PFSISLP \| SGIR27LP \| SGR27LP \| SGR30 \| SGR30LP \| SGR30MLP \|